2014 Peugeot 208 Owner's Manual - RHD (UK, Australia)

FREqUENTLY ASKED q UESTIONS
295
q

UESTION
ANSWER SOLUTION
With the engine off, the
system switches off after
a few minutes of use. When the engine is switched off, the system's operating time depends on
the battery charge.
The switch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery. Start the vehicle's engine to increase the battery
charge.
USB, portable player, connection key
Playback of my
u
SB
memory stick starts only
after a very long wait
(around 2 to 3 minutes). Some files supplied with the memory stick may greatly slow down access
to reading the memory stick (multiplication by 10 of the catalogue time\
).
Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
When I connect my
iPhone as telephone and
to the
u
SB port at the
same time, I am unable
to play the music files. When the iPhone connects automatically as a telephone, it forces the
streaming function. The streaming function takes the place of the
u
SB
function which is then not useable, there is a period without sound of t\
he
track being played with Apple
® players. Disconnect and reconnect to the u SB port (the
u

SB function takes priority over streaming).

296

297
AUDIO SYSTEM / BLUETOOTH01 First steps
For safety reasons, the driver must only carry out
operations which require prolonged attention while the
vehicle is stationary.
When the engine is switched off and to prevent
discharging of the battery, the system switches off after
activation of energy economy mode.
CONTENTS
02
Steering mounted
controls
03
Radio
04
Audio
05

Using
the telephone
06
Audio settings
07
Configuration
08

Screen menu map p.
p.
p.
p.
p.
p.
p.
p.
298
299
300
303
309
315
316
317
Frequently

asked questions p.
318

01
298
FIRST STEPS
Select the source:
- FM1, FM2, AM, CD, u SB, A u X,
Streaming.
-

accept an incoming call.
Long press:
-


open the calls log for the
telephone connected.
-


or end a call if in progress. Adjust audio settings:
sound ambience, treble,
bass, loudness, distribution,
left/right balance, front/rear
balance, automatic volume.
On / Of

f and volume
adjustment. Abandon the current
operation.
g

o up one level (menu or
folder).
e

ject CD.
Select a preset radio station.
Radio: long press: preset a
radio station.
Other than radio: see the
corresponding sections.
Automatic search for a lower / higher radio
frequency.
Select previous / next CD,
u SB track.
Navigation in a list.
Press and hold: fast forwards or backwards.
Open the main menu.
Display the list of stations received, the
CD/
u SB tracks or folders.
Long press: update the list of stations
received.

02STEERING MOUNTED CONTROLS
299
RADIO: selection of the previous / next
preset station.
CD /
u
SB: selection of the previous
genre / artist / folder / playlist from the
list depending on classification. Change of sound source.
Confirmation of a selection.
Start/
e
nd call with the telephone.
Press for more than 2 seconds: access
to the call log.
RADIO: automatic search for a lower
frequency.
CD / MP3 /
u
SB: selection of the
previous track.
CD /
u
SB: continuous press: fast
reverse.
RADIO: automatic search for a higher frequency.
CD / MP3 /
u
SB: selection of the next track.
CD /
u
SB: continuous press: fast forwards play.
Volume increase.
Volume decrease. Mute the sound by pressing
the volume increase
and decrease buttons
simultaneously.
Restore the sound: by
pressing one of the two
volume buttons.

03
300Press SRC/TEL repeatedly and select
the FM1, FM2 or AM waveband.
Press a button to listen to the
corresponding preset station.
Select the desired radio station and
confirm by pressing "
OK".
Radio
Press LIST to display the list of stations
received in alphabetical order.
The exterior environment (hills, buildings, tunnel, car park, below gro\
und...) may prevent reception, even in RDS station tracking (alternative
frequencies) mode. This phenomenon is normal in the propagation of radio waves and is in no\
way indicative of a fault with the audio system.
A long press on LIST builds or updates
the list of stations; audio reception is cut
momentarily.
Make a long press on one of the buttons
to preset the station being listened to.
The name of the station is displayed and
an audible signal confirms the preset.
A press changes to the next or previous
letter (e.g. A, B, D, F,
g , J, K, ...).
Managing the list
Presetting and selecting a station
When recalling a preset station, of the reception of the station is
poor, the radio will try to find a frequency transmitting the same
programme and a message appears in the screen.
RADIO

03
301
RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the country as radio stations do not cover
100

% of the territory. This explains the loss of reception of the
station during a journey.
RDS
With source FM1 or FM2, press MENU
then select "Radio".
Select or deselect "RDS" to activate or
deactivate RDS then confirm with "OK"
to save the setting.
Entering a frequency manually
Press MENU, select "Radio", then
select "Write freq.".
Press + or - to select the desired
frequency and confirm with "OK".
RADIO

03
302
RADIO
Radio text is information transmitted by the radio station related to
the current programme or song.With the radio displayed on the screen,
press MENU then select "Radio".
Select or deselect "TXT" to activate or deactivate the display of
Radio Text.
Displaying RADIO TEXT
Receiving TA messages
The TA (Traffic Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD,
u SB, ...) is
interrupted automatically to play the TA message. Normal playback
of the audio source resumes at the end of the transmission of the
message.
Press MENU, select "Radio".
Select or deselect "TA" to activate
or deactivate the reception of traffic
messages.