Catalytic converterMaintenance 11-3
11
E01000202437
The  exhaust  gas  scavenging  devices  usedwith  catalytic  converter  are  extremely  effi-cient  for  the  reduction  of  noxious  gases.  Thecatalytic  converter  is  installed  in  the  exhaustsystem.It  is  important  to  keep  the  engine  properlytuned  to  ensure proper catalyst  operation andprevent possible catalyst damage.
E01000303868
1. Pull  the  release  lever  towards  you  tounlock the bonnet.
 zMake  sure  that  the  engine  and  Plug-inHybrid EV system has cooled down beforeremoving the radiator cap and EV coolingsystem  reserve  tank  cap,  because  hotsteam or boiling water otherwise will gushfrom the filler port and may scald you. zDo  not smoke, cause sparks or allow  openflames  around  fuel  or  auxiliary  battery.The fumes are flammable. zBe  extremely  cautious  when  workingaround  the  auxiliary  battery.  It  containspoisonous and corrosive sulphuric acid. zDo not get under your vehicle with just thebody  jack  supporting  it.  Always  use  auto-motive jack stands. zImproper  handling  of
 components and
materials used in the vehicle can endangeryour  personal  safety.  We  recommend  youto  consult  a  specialist  for  necessary  infor-mation. zThe  components  inside  the  engine  roommight be very hot to the touch.To   a v o i d   b e i n g   b u r n t ,   m a k e   s u r e   a l l   c o m -ponents  have  sufficiently  cooled  beforebeginning  an  inspection.  These  compo-nents  are  affixed  with  the  label  indicatingprecautions  for  handling.  Follow  theinstructions on the label.WA R N I N G
1- Brake fluid reservoir (RHD)2- Engine oil level gauge3- Engine oil cap4- Brake fluid reservoir (LHD)5- Washer fluid reservoir6- EV cooling system reservoir7- Engine coolant reservoirCatalytic converter 
WA R N I N G zAs  with  any  vehicle,  do  not  park  or  oper-ate this vehicle in areas where combustiblematerials  such  as  dry  grass  or  leaves  cancome in contact with a hot exhaust since afire could occur. zPaint should not be applied to the catalyticconverter.NOTE
 zUse  fuel  of  the  type  recommended  in  “Fuelselection” on page 2.
Bonnet To   o p e n  
BK0203201EN.book  3 ページ  2013年11月19日 火曜日 午前11時50分 
Washer fluid
Maintenance 11-7
11
MITSUBISHI MOTORS GENUINE Coolanthas excellent protection against corrosion andrust formation of all metals including alumin-ium  and  can  avoid  blockages  in  the  radiator,heater, cylinder head, engine block, etc.Because of the necessity of this anti-corrosionagent,  the  coolant  must  not  be  replaced  withplain  water  even  in  summer.  The  requiredconcentration of anti-freeze differs dependingon the expected ambient temperature.Above  -35  °C:  50  %  concentration  of  anti-freezeBelow  -35  °C:  60  %  concentration  of  anti-freeze
If  the  temperatures  in  your  area  drop  belowfreezing,  there  is  the  danger  that  the  coolantin  the  engine,  plug-in  hybrid  EV  system  orradiator  could  freeze  and  cause  severe  dam-age to the engine and/or radiator. Add a suffi-cient  amount  of  anti-freeze  to  the  coolant  toprevent it from freezing.The  concentration  should  be  checked  beforethe  start  of  cold  weather  and  anti-freezeadded to the system if necessary.
E01000700890
Open  the  washer  fluid  reservoir  cap  andcheck  the  level  of  washer  fluid  with  the  dip-stick.If  the  level  is  low,  replenish  the  containerwith washer fluid.
To   e n s u r e   p r o p e r   o p e r a t i o n   o f   t h e   w a s h e r s   a tlow  temperatures,  use  a  fluid  containing  ananti-freezing agent.
E01000801696
The  fluid  level  must  be  between  the  “MAX”and “MIN” marks on the reservoir.
*: similar  high  quality  ethylene  glycol  basednon-silicate,  non-amine,  non-nitrate  andnon-borate  coolant  with  long  life  hybridorganic acid technologyCAUTION zDo not use alcohol or methanol anti-freeze orany  engine  coolants 
mixed  with  alcohol  or
methanol anti-freeze. The use of an improperanti-freeze  can  cause  corrosion  of  the  alu-minium components. zDo  not  use  water  to  adjust  the  concentrationof coolant. zConcentrations exceeding 60 % will result ina  reduction  of  both  the  anti-freeze  and  cool-ing performance thus adversely affecting theengine.
 zDo not top up with water only.Wa t e r   b y   i t s e l f   r e d u c e s   t h e   r u s t - p r o t e c t i v eand  anti-freeze  qualities  of  the  coolant  andhas  a  lower  boiling  point.  It  can  also  causedamage  to  the  cooling  system  if  it  shouldfreeze.  Do  not  use  tapwater,  as  it  can  causecorrosion and rust formation.
During cold weatherWa s h e r   f l u i d  
CAUTION
NOTE
 zThe  washer  fluid  container  serves  the  wind-screen,  rear  window  and  headlamps  (if  soequipped).
During cold weather Brake fluid To   c h e c k   t h e   f l u i d   l e v e l  
EMPTY
FULL
BK0203201EN.book  7 ページ  2013年11月19日 火曜日 午前11時50分