2014 MITSUBISHI OUTLANDER SPORT lights

Keys4-2 Locking and unlocking
4
E00300103572
The key fits all locks.
E00312700011
The key number is stamped on the tag as indi-cated in the illustration.Make a record of the key number and storethe key and key number tag in separateplaces, so that you can order a key from yourauthorised MITSUBISHI MOTORS dealer inthe event the original keys are lost.
Keys 1- Keyless operation key2- Keyless operation key (with electric
tailgate switch)
3- Emergency keyWA R N I N GzWhen carrying a key on flights, do notpress any switches on
the key while on the
plane. If a switch is pressed on the plane,the key emits electromagnetic waves,which could adversely affect the plane’sflight operation.When carrying a key in
a bag, be careful
that no switches on
the key can be easily
pressed by mistake.
NOTE
zThe key is a precision electronic part with abuilt-in signal transmitter. Please observe thefollowing in order to prevent a malfunction.•Do not leave anywhere
that is exposed to
direct sunlight, for example on the dash-board.•Do not disassem
ble or modify.
•Do not excessively bend the key or subjectit to a strong impact.•Do not expose to water.•Keep away from magnetic key rings.•Keep away from audio systems, personalcomputers, TVs, and any other equipmentthat generates a magnetic field.•Keep away from devices that emit strongelectromagnetic waves, such as cellularphones, wireless de
vices and high fre-
quency equipment (i
ncluding medical
devices).• Do not wash with ultrasonic cleaners orsimilar equipment.•Do not leave the key where it may beexposed to high temperature or high humid-ity.
zThe plug-in hybrid EV system is designed sothat it will not start if the ID code registeredin the immobiliser computer and the key’s IDcode do not match. Refer to the section enti-tled “Electronic immobiliser” for details andkey usage.
z[For vehicles equipped with the securityalarm system]Pay attention to the following if the securityalarm is set to “Active”.Refer to “Security alarm system” on page4-24.•If the security alarm is in the system armedmode, the alarm will
sound if the doors are
opened after being unl
ocked with the key,
the inside lock knob or the central door lockswitch.•Even if the security alarm is set to“Active”, the system preparation mode isnot entered if the keyless entry system orthe keyless operation
function was not used
to lock the vehicle.
Key number tag
NOTE
BK0203201EN.book 2 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Combination headlamps and dipper switch6-40 Instruments and controls
6
When the operation mode of the powerswitch is put in ON, if the brake fluid is low,this warning is displayed.The warning lamp in the instrument clusteralso illuminates.
E00524901309
If the engine oil pressure drops while thePlug-in Hybrid EV System is operating, the
warning display is displayed on the informa-tion screen in the multi information display.
E00506003416
CAUTIONzIf a vehicle is driven without releasing theparking brake, the brake will be overheated,resulting in ineffectiv
e braking and possible
brake failure.If this warning is displayed, release the park-ing brake.CAUTIONzIf this warning stays illuminated and doesnot go out while driving, there is a danger ofineffective braking. If this happens, immedi-ately park your vehicle in a safe place andwe recommend you to have it checked.
zIf the brake warning disp
lay is displayed and
the brake warning lamp and the ABS warn-ing lamp are illuminated at the same time,the braking force dist
ribution function will
not operate, so the vehicle may be destabi-lised during sudden braking. Avoid suddenbraking and high-speed driving, stop thevehicle in a safe place, and we recommendyou to have it checked.zThe vehicle should be brought to a halt in thefollowing manner when brake performancehas deteriorated.•Depress the brake pedal harder than usual.Even if the brake pe
dal moves down to the
very end of its possible stroke, keep itpressed down hard.• Should the brakes fail, use regenerativebrake to reduce your speed and carefullypull the parking brake lever.Depress the brake pedal to operate the stoplamp to alert the vehicles behind you.
Oil pressure warning display
CAUTION
CAUTIONzIf the vehicle is driven while the engine oil islow, or the oil level is normal but the warn-ing is displayed, the engine may burn out andbe damaged.zIf the warning is displayed while the Plug-inHybrid EV System is operating, immediatelypark your vehicle in a safe place and checkthe engine oil level.zIf the warning is disp
layed while the engine
oil level is normal, have it inspected.
Combination headlamps and dipper switch Headlamps
NOTE
zDo not leave the lights on for a long timewhile the Plug-in Hybrid EV System is sta-tionary (not operating). A run-down auxil-iary battery could result.
BK0203201EN.book 40 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Anti-lock brake system (ABS)Starting and driving 7-31
7
E00607302423
zAv o i d h a r d b r a k i n g a n d h i g h - s p e e d d r i v -ing. Stop the vehicle in a safe place.Restart the Plug-in Hybrid EV Systemand check to see whether the lamp goesout after a few minutes driving; if it thenremains off during driving, there is noproblem.However, if the lamp does not go out, or ifit lights up again when the vehicle isdriven, we recommend you to have thevehicle checked as soon as possible.zIf you start Plug-in Hybrid EV Systemwhen the auxiliary battery voltage isinsufficient, ABS warning lamp/displaymay illuminate, but this is not a failure ofABS. When the drive battery is charged,the auxiliary battery is also charged, andthe warning lamp/display will go out. Ifthe warning lamp/display continues illu-minating even after the battery is suffi-ciently charged or the warninglamp/display illuminates frequently ,haveyour vehicle inspected by a MITSUBISHIMOTORS Authorised Service Point.
Wa r n i n g l a m p

Warning displayThe ABS and brake force distribution func-tion may not work, so hard braking couldmake the vehicle unstable.Av o i d h a r d b r a k i n g a n d h i g h - s p e e d d r i v i n g .Stop the vehicle in a safe place immediatelyand contact a MITSUBISHI MOTORSAuthorised Service Point.
E00618800219
After driving on snowy roads, remove anysnow and ice which may have becomeadhered to the wheel areas.When doing this, be careful not to damage thewheel speed sensors (A) and cables located ateach wheel on vehicles equipped with anABS.
If the warning lamp / display illuminate while driving If only the ABS warning lamp/dis-play illuminate
If the ABS warning lamp / display and brake warning lamp / display illuminate at the same time
NOTE
zThe ABS warning lamp and brake warninglamp illuminate at the same time and thewarning displays appe
ar alternately on the
information screen in the multi informationdisplay.
After driving on icy roads Front
Rear
BK0203201EN.book 31 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Adaptive Cruise Control System (ACC)*
Starting and driving 7-49
7
Wi t h t h e A C C tu r ned on ( i n th e ‘ s t an dbystate’), push down the “SET -” switch whiledriving.When your desired speed is reached, releasethe “SET -” switch; then this speed is set andthe ACC initiates the speed control to the setspeed.
The set speed is indicated on the informationscreen of the multi-information display.The ACC can be selected between approxi-mately 40 km/h to 180 km/h.Yo u c a n s e t a n d i n i t i a t e t h e s p e e d c o n t r o lwhen driving at approximately 10-40 km/hwhile a vehicle in front is being detected. Inthis case, the target speed is set to 40 km/h.Setting to any speed outside this range doesnot cause the ACC to start the control.When the ACC is initialized, a buzzer soundis heard and the “SET” indicator lights up onthe screen. At the same time, the displayshowing the following distance setting andthe running-ahead vehicle symbol (only whenthe ACC is detecting a vehicle in front) isswitched to the in-control mode display.
NOTE
zEven if the ACC is in the activated statewhen the operation mode is set to “OFF”, thesystem does not automatically become acti-vated when the operation mode is set to“ON” next time.
To a c t i v a t e A C C c o n t r o l

NOTE
zThe ACC cannot start the control when anyof the following conditions is present. Youare alerted to this state by a sounding buzzer.•When the vehicle speed is lower thanapproximately 10 km/h or 180 km/h orhigher.•When the vehicle is running at a speedbetween approximately 10 and 40 km/h andthe ACC is not detecting any vehicle infront.•When the ASC is in the OFF state.•When ABS, ASC or TCL is working.•When the selector lever is in a positionother than “D” (DRIVE).• While the brake pedal is being depressed.•When the parking brake is engaged.•When the system determines that its perfor-mance has been degraded due to contami-nants adhered to the sensor.•When there is any abnormality in the sys-tem.
BK0203201EN.book 49 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Forward Collision Mitigation System (FCM)*
Starting and driving 7-57
7
zIn the following situations, the system pro-vides neither cont
rol nor alarming.
•The vehicle in front of your vehicle is mov-ing at a speed much lower than your vehi-cle’s speed.•When a vehicle suddenl
y cuts in front of
your vehicle.•When the distance from a vehicle in front isextremely short.•To an oncoming vehicle.•When your vehicle’s speed is much lower.•When the selector leve
r is other in the “D”
(DRIVE) position.•When the system is faulty (if the systemself-detects any fault, the “FCM SERVICEREQUIRED” message is indicated and the“FCM OFF” indicator lights up on theinformation screen of the multi-informationdisplay).If the message remains after the operationmode has been turned to the “OFF” positionand then turned back to the “ON” position,contact a MITSUBISHI MOTORS Author-ised Service Point.CAUTION
zBraking function will not work in the follow-ing situations.•Your vehicle is driving at approximately 30km/h or faster while the vehicle in front isstationary or moving extremely slowly.•The ASC is OFF.zThe forward collision warning functionand/or the FCM braking function may notactivate in the following situations.•When a motorcycle, bicycle, pedestrian,animal, fallen objects, or anything otherthan a vehicle is present in front of yourvehicle.•When a vehicle suddenly appear just infront of your vehicle.•When a vehicle cuts in front of your vehiclevery closely.•When the vehicle in front is offset to theleft or right.•When the vehicle in front is towing atrailer.•A freight trailer that is not carrying a con-tainer.•The vehicle has a pr
otruding load from the
carrier.•The vehicle has a low vehicle height.•The vehicle has an extremely high groundclearance.•When there is a different object near thevehicle.CAUTION
•When driving on a road with many and suc-cessive curves, including when passingtheir entrances and outlets.•When accelerating and deceleratingquickly.•When the system recognizes driver’s steer-ing, accelerating, braking or gear shiftingactions as evasive actions to avoid colli-sion.•When driving on a road with steep andalternating up
and down slopes.
•When a road surface is surging, and there isunevenness.•When being driven in a tunnel.•When the your vehicle
changed lanes, and
your vehicle approached immediatelybehind the vehicle in front.•During a certain time after your vehicleturns left or right.•When you are carrying extremely heavyloads in the rear seats or luggage area.•After the Plug-in Hybrid EV System hasbeen running for an extended period oftime.•Under adverse weather conditions (rain,snow, sand storms, etc.)
*
•When the cover part in
front of the sensor
and the sensor become dirty or adheringsnow and ice
*.
•When water, snow or sand on the road areextorted by the vehicle in front or anoncoming vehicle
*.
CAUTION
BK0203201EN.book 57 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Forward Collision Mitigation System (FCM)*7-58 Starting and driving
7
*: When judging the state that detection per-formance deterioration and the FCM can’toperate temporarily by these situations auto-matically, “FCM TEMPORARILY NOTAVA I L A B L E ” m e s s a g e i s i n d i c a t e d , a n d a“FCM OFF” indicator lights up.Additionally, it may be indicated in the fol-lowing situations.•When the brake is over heating.•When you are driving in light traffic withfew vehicles and obs
tacles in front.
When the FCM will be in the state which canoperate, indication is released automatically.When indication keeps going out, there is anabnormal possibility of the system. Pleasecontact a MITSUBISHI MOTORS Author-ised Service Point.zFactors such as the positional relationshipbetween your vehicle and a vehicle in front,driver’s own technique of steering the vehi-cle and irregularly moving traffic due toaccidents or vehicle trouble may deter theFCM control and alarm from functioning.CAUTION
zWhen the system recognizes driver’s steer-ing or accelerating actions as evasive actionsto avoid collision, the FCM control andalarm functions may be canceled.zThe FCM control and alarm functions maybe triggered in the following situations.•When there is a structure (B) beside theentrance of a curve and intersection.•When running on a na
rrow iron bridge.
•When passing through a gate with smallhead or side clearances.•When there are metallic objects, steps orprojections on the road surface.•When quickly approaching a vehicle infront to overtake it.•When passing an electronic toll collectiongate.•When running under an
overpass, an pedes-
trian overpass or a small tunnel.•When running in Multi-storey car park.•When running the road the gradientchanges suddenly.•When stopping very close to a wall or avehicle in front.CAUTION
B
•When passing close to the vehicle or anobject.•When driving on the road that the vehicle infront runs in offset
position from your vehi-
cle.
zTurn off the system beforehand when thevehicle is placed in a
ny of the following situ-
ations as the system can operate unexpect-edly.•When your vehicle’s wheels are driven bythe Plug-in Hybrid EV System on a lift.•When your vehicle is towed or your vehicletows another vehicle.•When your vehicle is carried on a truck.•When enjoying sports driving on a circuit.•When your vehicle is on a chassisdynamometer or free rollers.•When the tyre pressure is not proper. CAUTION
BK0203201EN.book 58 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Reversing sensor system*
Starting and driving 7-63
7
E00615500374
This system operates when you are backingthe vehicle. It uses corner and back sensors todetect an obstacle and the information screenin the multi information display and thebuzzer to inform you of the approximate dis-tance to the obstacle.
E00615601473
The detection areas of the corner and backsensors are limited to those shown in theillustration. Moreover, the sensors are unableto detect low or thin objects or objects nearthe rear bumper. Thus, make sure to check thesurroundings as you operate the vehicle in asafe manner.There are two corner sensors (A) at the cor-ners of the rear bumper, and two back sensors(B) in the centre of the rear bumper.
•When passing a road section where thenumber of lanes increases/decreases ormultiple lanes are crossing each other.•When the lane is marked by double or oth-erwise special lines.•When driving on a winding or rough road.•When driving on a sli
ppery road covered by
rain water, snow, ice, etc.•When passing through a place where thebrightness suddenly ch
anges, like the inlet
or outlet of a tunnel.•When turning steep curves.•When the road surface is reflecting the lightshining from the direction opposite to therunning direction.•Vehicle largely lurches when it is runningover steps or other irregularities of the roadsurface.•When the headlamp illumination is inade-quate because of contaminated or deterio-rated lenses or improperly aimedheadlamps.•When the vehicle is leaning much to oneside due to heavy l
uggage on it or improp-
erly adjusted tyre pressures.•When oncoming vehicl
es’ headlamps shine
the LDW camera.•When the vehicle is equipped with non-standard tyres (incl
uding excessively worn
tyres), uses snow tr
action device (tyre
chains), or has non-specified componentssuch as a modified suspension.CAUTION
•When the windscreen is covered with rainwater, snow, dust, etc.
zFollow the instructions given below to keepyour LDW in good operating conditions. •Always keep the windscreen clean.•Avoid applying a str
ong shock or pressure
to the LDW camera. Do not attempt to dis-assemble it.•Disturbing the installation of the LDWcamera or its removal is under no circum-stances permitted. The camera has beenprecisely oriented at the factory.• Do not put anything like a sticker on thearea in front of the LDW camera lens of thewindscreen.•Use only MITSUBISHI MOTORS GENU-INE Parts when replacing the windscreenwipers.
Reversing sensor system
*
CAUTION
CAUTIONzThe reversing sensor system assists you indetermining the approximate distancebetween the vehicle and an obstacle locatedbehind the vehicle. It has limitations in termsof detectable areas and objects, and may notproperly detect some objects. Therefore, donot place excessive confidence in the revers-ing sensor system, and operate the vehicle ascarefully as you would
a vehicle without this
system.zMake sure to check the surroundings withyour own eyes to ensure safety. Do not oper-ate the vehicle by relying on the reversingsensor system alone.
Obstacle detection areas

Corner and back sensor locations

BK0203201EN.book 63 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Auxiliary battery11-8 Maintenance
11
The fluid level is monitored by a float. Whenthe fluid level falls below the “MIN” mark,the brake fluid warning lamp lights up.The fluid level falls slightly with wear of thebrake pads, but this does not indicate anyabnormality.The fluid in the master cylinder should bechecked when doing other work under the
bonnet. The brake system should also bechecked for leaks at the same time.If the fluid level falls markedly in a shortlength of time, it indicates leaks from thebrake system.If this occurs, we recommend you to have thevehicle checked.Use brake fluid conforming to DOT3 orDOT4 from a sealed container. The brakefluid is hygroscopic. Too much moisture inthe brake fluid will adversely affect the brakesystem, reducing the performance.
E01001203284
The condition of the auxiliary battery is veryimportant for quick starting of the plug-inhybrid EV system and proper functioning ofthe vehicle’s electrical system. Regularinspection is especially important in coldweather. Be sure to have a MITSUBISHIMOTORS Authorized Service Point checkthe auxiliary battery.
LHDRHD
Fluid type
CAUTIONzTa k e c a r e i n h a n d l i n g b r a k e f l u i d a s i t i sharmful to the eyes,
may irritate your skin
and also damage to painted surfaces.zUse only the specified brake fluid.Do not mix or add different brand of brakefluid to prevent chemical reaction.Do not let any petrol
eum-based fluid touch,
mix with, or get into the brake fluid.This will damage the seals.zKeep the reservoir tank cap closed to preventthe brake fluid from deteriorating exceptmaintenance.zClean the filler cap before removing andclose the cap securely after maintenance.
Auxiliary battery
WA R N I N GzBe sure to have a MITSUBISHI MOTORSAuthorized Service Point charge the bat-tery. Do not charge the battery yourself.Flammable gases may leak and explode.CAUTIONzThere is a type of auxiliary battery is notproperly installed in the vehicle, even if thesame specification.When replacing the auxiliary battery, pleasecontact a MITSUBISHI MOTORS Author-ized Service Point.
BK0203201EN.book 8 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分