Page 145 of 404
145
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
5Select the items to be set.
6Check that the entire route map is dis-
played. (→P.133)
1Display the “Route” screen. (→P.144)
2Select “A d d ”.
3Search for an additional destination in
the same way as a destination search.
(→P.116)
4Select “Add destination here” to insert
the new destination into the route.No.FunctionPage
Select to set search condi-
tions.147
Select to set detours.147
Select to set road prefer-
ences.148
Select to add destinations.145
Select to delete destina-
tions.146
Select to reorder destina-
tions.146
Select to display route
overview.149
ADDING DESTINATIONS
IS_Navi_EE_53C71E.book 145 ページ 2014年5月29日 木曜日 午前11時22分
Page 146 of 404
146
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
1Display the “Route” screen. (→P.144)
2Select “Reorder”.
3Select the desired destination and se-
lect “Move up” or “Move down” to
change the arrival order. Then select
“OK”.
1Display the “Route” screen. (→P.144)
2Select “Delete”.
3Select “Yes” when the confirmation
screen appears.
zWhen more than 1 destination is set, a list
will be displayed on the screen.
“Delete all”: Select to delete all destinations
on the list.
zIf more than 1 destination has been set, the
system will recalculate the route(s) to the
set destination(s) as necessary.
REORDERING
DESTINATIONS
When more than 1 destination has been
set, the arrival order of the destinations
can be changed.
DELETING DESTINATIONS
IS_Navi_EE_53C71E.book 146 ページ 2014年5月29日 木曜日 午前11時22分
Page 147 of 404
147
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Display the “Route” screen. (→P.144)
2Select “Search condition”.
3Select the desired type and select “OK”.
1Display the “Route” screen. (→P.144)
2Select “Detour”.
3Select the desired detour distance.
SETTING SEARCH
CONDITION
Road conditions of the route to the des-
tination can be set.
DETOUR SETTING
During the route guidance, the route
can be changed to detour around a sec-
tion of the route where a delay is caused
by road repairs, an accident, etc.
No.Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
Select to make the system search for
the route based on the traffic con-
gestion information received from
traffic information. (→P.109)
IS_Navi_EE_53C71E.book 147 ページ 2014年5月29日 木曜日 午前11時22分
Page 148 of 404