2014 Lexus IS250 Navigation Manual

121
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Town”.
2Enter the town name and select “OK”.
“Option”: Select to select a town in a differ-
ent way. (→P.121)
3Select the desired town name.
: Select to display a map of the cen-
tral area of the desired town.
■SELECTING A TOWN IN A DIFFER-
ENT WAY
1Select “Option”.
2Select the desired item.
3Select the desired town name.
ENTERING A TOWN NAME
No.FunctionPage
Select to enter the postal
code.122
Select from the last 5
towns.
Select from the nearest 5
towns.
IS_Navi_EE_53C71E.book 121 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

122
2. DESTINATION SEARCH
IS300h/250_Navi_EE
XBy entering the postal code
1Select “Postal code”.
2Enter the postal code and select “OK”.
3Select the desired postal code.
1Select “Street”.
2Enter the street name and select “OK”.
3Select the desired street name.
zIf the same address exists in more than 1
town, a screen requesting the town name to
be entered or selected will be displayed.
“Enter name”: Select to enter a town name
to narrow down the listed items.
ENTERING A STREET NAME
IS_Navi_EE_53C71E.book 122 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

123
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select “POI”.
3Enter the name of the POI and select
“OK”.
4Select the desired POI.
“Category”: Select to narrow down the cat-
egory.
“Town”: Select to narrow down a town.
zWhen entering the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen is displayed.
■NARROWING DOWN CATEGO-
RIES
1Select “Categor y”.
2Select the desired category.
“List all categories”: Select to display all
POI categories.
■NARROWING DOWN A TOWN
1Select “Town”.
2Enter the town name and select “OK”.
“Option”: Select to select a town in a differ-
ent way. (→P.121)
3Select the desired town name.
SEARCHING BY POI
IS_Navi_EE_53C71E.book 123 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

124
2. DESTINATION SEARCH
IS300h/250_Navi_EE
1Display the “Destination” screen.
(→P.118)
2Select “Map”.
3Scroll the map to the desired point
(→P.103) and select “Enter”.
1Display the “Destination” screen.
(→P.118)
2Select “Memory”.
3Select the desired memory point.
“Stored routes”: Select to select a stored
route established and downloaded from the
Lexus portal site. (→P.125)
SEARCHING BY MAP
By selecting “Map” the last displayed lo-
cation is displayed again on the map
screen. You can search for a destination
from this map.
SEARCHING BY MEMORY
POINTS
IS_Navi_EE_53C71E.book 124 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

125
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■SELECTING A STORED ROUTE
1Select “Stored routes”.
2Select the desired stored route.
3Select “OK”.
zA map of the destination will be displayed
when a destination is selected from the list.
1Display the “Destination” screen.
(→P.118)
2Select “Previous”.
3Select the desired destination.
“Previous start point”: Select to display the
start point map of the previous guided
route.
“Delete”: Select to delete the previous des-
tination. (→P.126)
This feature is available when a route es-
tablished and downloaded from Lexus
portal site is stored in the navigation sys-
tem. (→P.382)
SEARCHING FROM
PREVIOUS DESTINATIONS
INFORMATION
●
The previous starting point and up to 100
previously set destinations are displayed
on the screen.
IS_Navi_EE_53C71E.book 125 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

126
2. DESTINATION SEARCH
IS300h/250_Navi_EE
■DELETING PREVIOUS DESTINA-
TIONS
1Select “Delete”.
2Select the previous destination to be de-
leted and select “Delete”.
3Select “Yes” when the confirmation
screen appears.
1Display the “Destination” screen.
(→P.118)
2Select “Intersection”.
3Enter the name of the first intersecting
street and select “OK”.
4Select the desired street name.
5Enter the name of the second intersect-
ing street and select “OK”.
6Select the desired street name.
SEARCHING BY
INTERSECTION
IS_Navi_EE_53C71E.book 126 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

127
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select “Motorway ent./exit”.
3Enter a motorway name and select
“OK”.
4Select the desired motorway.
5Select “Entrance” or “Exit”.
6Select the desired entrance or exit
name.
“Enter name”: Select to enter an entrance
or exit name to narrow down the listed
items.
INFORMATION
●
If the same 2 streets cross at more than 1
intersection, the screen changes and dis-
plays the menu to select the town name
where the streets intersect.
SEARCHING BY MOTORWAY
ENTRANCE/EXIT
IS_Navi_EE_53C71E.book 127 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

128
2. DESTINATION SEARCH
IS300h/250_Navi_EE
1Display the “Destination” screen.
(→P.118)
2Select “Coordinates”.
3Enter the latitude and longitude, and se-
lect “OK”.
, , : Used to enter coor-
dinates in DMS format.
: Used to enter coordinates in DEG
format.
1Display the “Destination” screen.
(→P.118)
2Select “Telephone no.”.
3Enter a telephone number and select
“OK”.
: Select to change the search area.
(→P.119)
zIf there is more than 1 site with the same
number, the list screen will be displayed
and select desired item.
SEARCHING BY
COORDINATES
Searching by latitude and longitude co-
ordinates is available using both DMS
format (for example: 12°34’56”) and
DEG format (for example: 12.345678).
SEARCHING BY TELEPHONE
NUMBER
INFORMATION
●
To set a memory point as a destination
using the telephone number, the number
must already be registered with the mem-
ory point. (→P.1 5 5 )
IS_Navi_EE_53C71E.book 128 ページ ２０１４年５月２９日　木曜日　午前１１時２２分