2014 KIA CADENZA Features and Functions Guide

23
AUTO HOLD*
AUTO HOLD temporarily maintain\f the vehicle at a \ftand\ftill even if the brake pedal i\f relea\fed . AUTO HOLD can be turned ON/OFF u\fing the AUTO HOLD \fwitch B on the driver’\f panel . Before AUTO HOLD will operate, the driver’\f door, engine hood and trunk mu\ft be clo\fed and the driver’\f \feat belt mu\ft be fa\ftened .
The AUTO HOLD indicator, which i\f in the in\ftrument clu\fter, ha\f four \ftate\f:
White: Standby - With vehicle at a \ftand\ftill, and AUTO HOLD \fwitch B turned ON, the indicator will illuminate white . While driving the vehicle (vehicle i\f not at a \ftand\ftill), the AUTO HOLD indicator will remain white .
\freen: Engaged - When coming to a complete \ftop by depre\f\fing the brake pedal, the AUTO HOLD indicator change\f from white to green .
OFF (not illuminated): The indicator will turn OFF when the AUTO HOLD \fwitch B i\f manually turned OFF or when the EPB i\f manually turned ON .
Yellow: Malfunction - When the indicator i\f illuminated yellow, there may be a \fy\ftem malfunction . Take your vehicle to a local Kia dealer .
Electric Parking Brake (EPB) / Auto Hold Video To view a video on your mobile device, \fnap thi\f QR code or vi\fit the li\fted web\fite .
Refer to page 2 for more information .
www.KuTechVideos.com/vg13/\f014
QR CODE
VIDVEOS &Q RSC&QSNDTQUMOSLVT’VISPNUS NLAIQCQSNAQUVC\fTWS\fTPNULVC\fNTSVTHSOVPQC ESDVUT\fTWOYS\b\fPSQF’\fAAQHS
Air iCondrit

24
Heated Steering Wheel*
Pre\f\f A to turn ON/OFF Steering Wheel Heater, while
the Engine Start/Stop Button i\f in the ON po\fition .
Steering Wheel Heater will turn OFF automatically in 30
minute\f, or when button i\f pre\f\fed again to deactivate .
Pre\f\f the Power Rear Sun\fhade button B to rai\fe/
lower \fun\fhade, while the Engine Start/Stop Button i\f
in the ACC/ON po\fition .
• If ignition i\f turned OFF, then ON again within 30 minute\f of Steering Wheel Heater being turned ON, the \fy\ftem will remain in the ON po\fition
• Sy\ftem doe\f NOT turn off when ignition i\f cycled . To turn off \fy\ftem, pre\f\f the \feat warmer \fwitch
Power Rear Sunshade*
QUICK TIPS
A
B
(Button\f located below Gear Shif t)
1 . The Power Rear Sun\fhade will lower when the Gear Shift i\f moved into the R (Rever\fe) po\fition
2 . Then when the Gear Shift i\f moved into D (Drive) and vehicle’\f traveling more than 12mph, the Power Rear Sun\fhade will unfold automatically
QUICK TIPS
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air iCondrit

2525
Seat Warmer\f – Pre\f\f right \fide of
button once for high \fetting (3 LED\f
lit) . Pre\f\f button twice for medium
\fetting (2 LED\f lit) . Pre\f\f a third time
for low \fetting (1 LED lit) and again to
turn OFF .
Ventilated Seat\f – Pre\f\f left \fide of
button once for high \fetting (3 LED\f
lit) . Pre\f\f twice for medium \fetting
(2 LED\f lit) . Pre\f\f a third time for low
\fetting (1 LED lit) and again to turn OFF .
Seat Warmers / Ventilated Seats*
Seat Warmers only*Seat Warmers / Ventilated Seats*
•
• With the \feat warmer \fwitch in the ON po\fition, the heating \fy\ftem in the \feat turn\f OFF or ON automatically depending on the \feat temperature
Seat Warmers and Ventilated Seats Video To view a video on your mobile device, \fnap thi\f QR code or vi\fit the li\fted web\fite .
Refer to page 2 for more information .
www.KuTechVideos.com/vg13/\f014
Wa\bming (Ye\f\fow LED)
Venti\fating (B\fue LED)
QUICK TIPS
QR CODE
Pre\f\f button once for high \fetting (2 LED\f lit) .
Pre\f\f button twice for low \fetting (1 LED lit) .
Pre\f\f button a third time to turn OFF .
VIDVEOS &Q RSC&QSNDTQUMOSLVT’VISPNUS NLAIQCQSNAQUVC\fTWS\fTPNULVC\fNTSVTHSOVPQC ESDVUT\fTWOYS\b\fPSQF’\fAAQHS
Air iCondrit

26
Power Adjustable Driver’s Seat
Move/Pre\f\f control\f to adju\ft Seat forward/backward, Seat Cu\fhion, Seatback or Lumbar .
SeatbackLumba\b
Seat fo\bwa\bd/backwa\bdSeat Cushion
A
AB
C
AA
BC
Cushion Extension
D
D
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air Con

27
Front Seat Headrest Adjustment
To adjust headrest forward: Pull bottom of headre\ft forward at an angle .
To adjust headrest back: Pull forward at a \flight angle to the farthe\ft po\fition and relea\fe .
Then pull forward to de\fired po\fition .
To raise headrest: Pull headre\ft up .
To lower headrest: Pre\f\f lock A, then pre\f\f the headre\ft down .
A
VIDVEOS &Q RSC&QSNDTQUMOSLVT’VISPNUS NLAIQCQSNAQUVC\fTWS\fTPNULVC\fNTSVTHSOVPQC ESDVUT\fTWOYS\b\fPSQF’\fAAQHS
Air Con

28
Smart \bey
The Smart Key’\f \fignal can be blocked by the normal operation of a cellular phone or \fmartphone . To help prevent thi\f, \ftore each device \feparately .
REMINDER: Remote button configuration may vary depending on vehicle option\f .
\bia Engine Stop/Start Button and Smart \bey To view a video on your mobile device, \fnap thi\f QR code or vi\fit the li\fted web\fite .
Refer to page 2 for more information .
www.KuTechVideos.com/vg13/\f014
A Pre\f\f to lock All Door\f
B Pre\f\f to unlock Driver’\f Door
Pre\f\f twice within 4 \fecond\f to
unlock All Door\f
C Pre\f\f and hold for more than 1
\fecond to unlock Trunk and open
D Pre\f\f and hold more than a half a
\fecond for Panic Alarm . To turn off
Alarm, pre\f\f any button
E Pre\f\f to relea\fe Mechanical Key
D
A
B
E
C
F
\f
Mechanical \bey F:
• U\fe to unlock driver’\f door:
1 . Remove door handle keyhole
cover with Mechanical Key
2 . In\fert Mechanical Key and turn
right to Unlock Driver’\f Door
3 . In\fert Mechanical Key and turn
left to Lock Driver’\f Door
• U\fe to enable/di\fable Child Safety
Lock\f (page 34)
• U\fe to lock glove box
Fo\b mo\be info\bmation on the Mechanical Key,
please \befe\b to you\b Owne\b’s Manual.
Driver’s Door Lock/Unlock button \f:
• Pre\f\f button once to unlock
driver’\f door
• Pre\f\f again within
4 \fecond\f to unlock
all door\f
•
Pre\f\f again to lock all door\f
QUICK TIPS
QR CODE
REMINDER: Tr u n k lid will partially open . To fully open, lift up manually .
REMINDER: The Trunk unlock\f when the Smart Key i\f within clo\fe proximity of the vehicle .
Lock
Un\fock
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air Con dot gi/C l

29ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS . \bIF EQUIPPED
OTHER \bEY FEATURES
•
• You can reprogram a \fingle HomeLink® button by repeating Step 2
• Era\fing programmed button\f will delete all trained tran\fmitter\f
The Auto-Dimming Rearview Mirror i\f de\figned to help
reduce glare from a vehicle’\f headlight\f located in the
rear and al\fo connect up to three electronic tran\fmitter\f
in one location .
To turn automatic dimming ON or OFF, pre\f\f button F
HomeLink® with Auto-Dimming
Rearview Mirror*
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection \fen\for
F Automatic dimming ON/OFF
\f Compa\f\f control button
If programming for the fir\ft time, begin with Step 1
(repeating thi\f \ftep will delete all information) .
To program non-rolling and rolling code garage door
opener\f and other device\f:
1 . Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly until the indicator light C begin\f to
fla\fh (to reprogram button\f, \fkip thi\f \ftep)
2 . Pre\f\f and hold the de\fired button A B D and hold
the button on the tran\fmitter while it i\f approximately
1 to 3 inche\f away from the mirror . The HomeLink®
Indicator light C will fla\fh rapidly once the frequency
\fignal ha\f been \fucce\f\ffully programmed
To fini\fh programming rolling code garage door opener\f,
complete the\fe \ftep\f:
3 . Locate the “learn” or “\fmart ” button on the garage
door’\f motor head unit . Pre\f\f and relea\fe the button
and complete Step 4 within 30 \fecond\f
4 . Firmly pre\f\f and relea\fe the programmed HomeLink®
button up to three time\f
Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly for approximately 20 \fecond\f,
and then relea\fe both button\f within 30 \fecond\f .
Operating HomeLink®:
Pre\f\f one of the programmed HomeLink® button\f .REMINDER: Mirror indicator light C will illuminate when automatic dimming i\f ON .
If you\b ga\bage doo\b opene\b was manufactu\bed in \f011 o\b late\b, and you’\be unable to p\bog\bam you\b vehicle’s HomeLink® system, you may need to pu\bchase a HomeLink® Repeate\b Kit. Fo\b mo\be info\bmation, go to www.HomeLink.com o\b call (800) 355-3515 .
ABCDEF\f
QUICK TIPS

30
Map/Room Lamps
Automatic turn off function*
The interior light\f automatically turn off approximately 30 \fecond\f after
or the Engine Sy\ftem Start/Stop button i\f OFF .
Map/Room Lamp Operation
Pre\f\f the len\f A to turn the Map Lamp ON/OFF . Thi\f light produce\f a
\fpot beam for convenient u\fe a\f a map lamp or a\f a per\fonal lamp for
the driver or the front pa\f\fenger .
The Map Lamp turn\f ON when any door i\f opened or the ignition i\f
turned OFF . When all door\f are locked or the ignition i\f ON, the Map
Lamp will turn OFF immediately .
ON po\fition B – When in ON po\fition, the Map and Room Lamp\f
remain ON until \fwitched again to turn OFF .
DOOR po\fition C – When in DOOR po\fition and a door i\f opened, or
door\f are unlocked from the Smart Key, the Map and Room Lamp\f turn
ON for approximately 30 \fecond\f .
OFF po\fition D - When in OFF po\fition, all interior light\f are OFF .
Room Lamp - Pre\f\f the len\f E to turn the Room Lamp ON/OFF .
•
• When door\f are unlocked by the Smart Key, the lamp turn\f ON for approximately 30 \fecond\f
• If your vehicle i\f equipped with the theft alarm \fy\ftem, the interior light\f automatically turn off approximately 3 \fecond\f after the \fy\ftem i\f in armed \ftage
• U\fing interior light\f for an extended period of time may cau\fe battery di\fcharge
A
B
C
A
D
EQUICK TIPS
REMINDER: When Room Lamp len\f i\f pre\f\fed ON it will \ftay remain ON, even when the Map Lamp \fwitch i\f in the OFF po\fition .
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air Con dot gi/C l