29ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS . \bIF EQUIPPED
OTHER \bEY FEATURES
•
• You can reprogram a \fingle HomeLink® button by repeating Step 2
• Era\fing programmed button\f will delete all trained tran\fmitter\f
The Auto-Dimming Rearview Mirror i\f de\figned to help
reduce glare from a vehicle’\f headlight\f located in the
rear and al\fo connect up to three electronic tran\fmitter\f
in one location .
To turn automatic dimming ON or OFF, pre\f\f button F
HomeLink® with Auto-Dimming
Rearview Mirror*
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection \fen\for
F Automatic dimming ON/OFF
\f Compa\f\f control button
If programming for the fir\ft time, begin with Step 1
(repeating thi\f \ftep will delete all information) .
To program non-rolling and rolling code garage door
opener\f and other device\f:
1 . Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly until the indicator light C begin\f to
fla\fh (to reprogram button\f, \fkip thi\f \ftep)
2 . Pre\f\f and hold the de\fired button A B D and hold
the button on the tran\fmitter while it i\f approximately
1 to 3 inche\f away from the mirror . The HomeLink®
Indicator light C will fla\fh rapidly once the frequency
\fignal ha\f been \fucce\f\ffully programmed
To fini\fh programming rolling code garage door opener\f,
complete the\fe \ftep\f:
3 . Locate the “learn” or “\fmart ” button on the garage
door’\f motor head unit . Pre\f\f and relea\fe the button
and complete Step 4 within 30 \fecond\f
4 . Firmly pre\f\f and relea\fe the programmed HomeLink®
button up to three time\f
Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly for approximately 20 \fecond\f,
and then relea\fe both button\f within 30 \fecond\f .
Operating HomeLink®:
Pre\f\f one of the programmed HomeLink® button\f .REMINDER: Mirror indicator light C will illuminate when automatic dimming i\f ON .
If you\b ga\bage doo\b opene\b was manufactu\bed in \f011 o\b late\b, and you’\be unable to p\bog\bam you\b vehicle’s HomeLink® system, you may need to pu\bchase a HomeLink® Repeate\b Kit. Fo\b mo\be info\bmation, go to www.HomeLink.com o\b call (800) 355-3515 .
ABCDEF\f
QUICK TIPS
