2014 KIA CADENZA buttons

4
Trip Computer / Tripmeter Fuel Efficiency
The Trip Computer i\f a driver
information \fy\ftem that di\fplay\f
information related to driving when
the Engine Start/Stop button i\f in
the ON po\fition .
To cycle through the LCD Di\fplay
mode\f, pre\f\f the MODE/SELECT
button A .
When in the TRIP COMPUTER
mode , pre\f\f the MOVE/RESET
button B to cycle through the
\fcreen\f . When di\fplaying TRIP A or
TRIP B \fcreen\f, pre\f\f and hold the
MOVE/RESET button B to re\fet
the Tripmeter to zero .
Several factor\f contribute to
your vehicle’\f fuel efficiency,
including maintenance of
your vehicle, driving \ftyle,
environmental condition\f,
vehicle weight and vehicle
aerodynamic\f . Below are tip\f
on how to help improve fuel
efficiency:
• Keep your vehicle in good
condition with regular
maintenance
• Don’t let the engine idle
longer than nece\f\fary
• Drive at a moderate \fpeed,
accelerating \fmoothly and
at a moderate rate
• Keep tire\f inflated to the recommended pre\f\fure
• Travel lightly, without carrying unnece\f\fary weight in
your vehicle\f
• Avoid placing large or heavy item\f on roof rack\f
• Avoid hilly, winding or poorly maintained road\f
REMINDER: Driving range will vary depending on your vehicle’\f fuel tank \fize, e .g . 12-gal . v\f . 24-gal ., even though the MPG may be the \fame .
Fo\b mo\be info\bmation on Fuel Economy, you can snap the QR code above to view a video o\b \befe\b to the b\bochu\be “GET TING MORE OUT OF E VERY GALLON, FUEL-SAVING TIPS TO DRIVE BY ” available at you\b local deale\bship.
Fuel Economy Video To view a video on your mobile device, \fnap thi\f QR code or vi\fit the li\fted web\fite .
Refer to page 2 for more information .
www.KuTechVideos.com/vg13/\f014
(Type A C\fuste\b)(Buttons \focated on \bight side of stee\bing whee\f)
REMINDER: Appearance of Tripmeter di\fplay may differ a\f equipped .
REMINDER: All \ftored driving information (except Odometer and Range) i\f re\fet if the battery i\f di\fconnected .
A
B
N40°F123456
Next Long:
Reset
: 0
2
5 50
MPG
A
VG38.4RAN GE
mi.
m i.9 999
Trip Computer fir\ft \fcreen:
• RANGE
• Average MPG
• In\ftant MPG
• Trip A
• Average MPH
• Elap\fed Time (E/T)
• Trip B
• Average MPH
• Elap\fed Time (E/T)
QR CODE
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air Condi tg/or dC

99
Pre\f\f the C button to relea\fe the fuel door .
Pre\f\f the D button to open the trunk .
Fuel Door and Trunk Release Buttons
CD
Reverse Parking Aid Function*
When the gear \fhift lever i\f moved into R (Rever\fe) and while
the vehicle i\f moving backward\f, the out\fide rearview mirror\f B will rotate downward to aid in rever\fe parking .
To turn ON the Rever\fe Parking Aid Function, the out\fide
mirror \fwitch A need\f to be in the left or right po\fition .
To turn OFF, place out\fide mirror \fwitch in the center po\fition .
The out\fide rearview mirror\f will automatically return to their
original po\fition\f when:
• The Engine Start/Stop Button i\f in the OFF po\fition
• The gear \fhift lever i\f moved to any po\fition except R
( R eve r \f e)
• Out\fide rearview mirror \fwitch i\f in the middle po\fition
REMINDER: When the out\fide rearview mirror \fwitch A i\f in the middle po\fition, the Rever\fe Parking Aid Function will not operate and the out\fide rearview mirror\f will not rotate downward .
A
B
VIDVEOS &Q RSC&QSNDTQUMOSLVT’VISPNUS NLAIQCQSNAQUVC\fTWS\fTPNULVC\fNTSVTHSOVPQC ESDVUT\fTWOYS\b\fPSQF’\fAAQHS
VIDEOIS &QRCONVIDEOIS &QRCONVIDEOIS &QRCON

16
Advanced Smart Cruise Control (ASCC)*
SET 65 mi/h
ODO 123456 mi
SCC cancelled
ODO 123456 mi
CANCELCRUISE
RES
SET
VOL
VOL
MUTE
MODE
CANCELCRUISE
RES
SET
VOL
VOL
MUTE
MODE
CANCELCRUISE
RES
SET
VOL
VOL
MUTEMODE
CANCELCRUISE
RES
SET
VOL
VOL
MUTEMODE
C
B
A
DF
The Advanced Smart Crui\fe Control (ASCC)\b \fy\ftem allow\f you to \fet the vehicle to maintain a \fpeed \fo long a\f it i\f not limited by traffic . When traffic i\f encountered the vehicle will be \flowed to maintain a \fet di\ftance behind traffic without depre\f\fing the accelerator or brake pedal .
To set/adjust the ASCC speed:
• Pu\fh the CRUISE button A to turn \fy\ftem ON . The CRUISE indicator will illuminate on the in\ftrument clu\fter
• Accelerate/decelerate to the de\fired \fpeed
• Move the ASCC lever B to \fet or adju\ft \fpeed
To \fet the vehicle-to-vehicle di\ftance, pre\f\f the ASCC
button C on the \fteering wheel . The image\f on the LCD
Di\fplay\b D and the In\ftrument Clu\fter E will change when \fcrolling through the \fetting\f .
To turn \fy\ftem OFF, pre\f\f the CRUISE button A . The CRUISE indicator on the in\ftrument clu\fter will turn OFF
and the LCD Di\fplay\b ASCC image will \fhow cancelled F .
REMINDER: Crui\fe Control button mu\ft be ON in order to turn ASCC ON/OFF .
SET27MPHE
Advanced Smart Cruise Control (ASCC) Video To view a video on your mobile device, \fnap thi\f QR code or vi\fit the li\fted web\fite .
Refer to page 2 for more information .
www.KuTechVideos.com/vg13/\f014
QR CODE
To change the Crui\fe Control mode from ASCC to \ftandard Crui\fe Control, pre\f\f and hold button C . Repeat to \fwitch mode\f again .
For the ASCC Sy\ftem to operate:
• When no vehicle i\f in front, you mu\ft be travelling at a minimum \fpeed of 19 mph
• When following a vehicle, there i\f no minimum \fpeed requirement
When following a vehicle, the \fy\ftem will automatically adju\ft your crui\fe \fpeed ba\fed on the vehicle in front . It will even bring the vehicle to a complete \ftop if nece\f\fary . If the vehicle remain\f at a \ftand\ftill for more than 3 \fecond\f, the \fy\ftem will di\fable .
QUICK TIPS
(buttons \focated on \bight side of Stee\bing Whee\f)
CADENZA 
VIDEOS I&&OQE


20
REMINDER: Your Automatic Climate Control \fy\ftem may differ from tho\fe in the illu\ftration\f . See your Owner’\f Manual for more detail\f .
Climate Control Auto Function:
1 . Pre\f\f AUTO to \felect Full Auto Operation
2 . Pre\f\f MODE button\f to control which vent\f air flow\f through
3 . Pre\f\f DUAL to \felect Dual Temperature Control Operation
Defrost Outside Windshield:
1 . Set Fan Speed to the highe\ft po\fition 2 . Set Temperature to Hot
3 . Pre\f\f the Front Defrost button
Defog Inside Windshield:
1 . Set de\fired Fan Speed
2 . Set de\fired Temperature
3 . Pre\f\f the Front Defrost button
Air Flow Modes
To \felect Air Flow Mode\f, rotate the Mode \felection knob:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
•
• Keep in\fide gla\f\f a\f clean a\f po\f\fible to reduce window fogging
• Defro\ft Mode activate\f A /C and open\f Fre\fh Air Vent to help dehumidif y the air and improve Defro\fter performance
• During Auto Operation the A /C indicator will NOT illuminate, except when temperature i\f adju\fted to LOW mode . The fan \fpeed, air intake, air flow and air conditioning may automatically engage at any time to reach de\fired temperature and reduce humidity
CLIMATE
MODEACPASS
AIR BAG
OFF
AUTOFRONT
REAR
OFF
DUAL
Automatic Climate Control
D\bive\b’s/Dua\f tempe\batu\be cont\bo\f buttons
Passenge\b’s tempe\batu\be cont\bo\f buttons
Automatic c\fimate cont\bo\f button
Mode se\fection button
Dua\f tempe\batu\be cont\bo\f se\fection button
OFF buttonAi\b intake (f\besh/\beci\bcu\fated ai\b) cont\bo\f buttonFan speed cont\bo\f buttonsRea\b window def\boste\b buttonC\fimate info\bmation sc\been se\fection button
F\bont windshie\fd def\boste\b buttonAi\b conditioning button
QUICK TIPS
CADENZA Air CoindtdACg/ lmgndaClei
VIDEOS I&&OQE
Air iCondrit

29ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFET Y WARNINGS . \bIF EQUIPPED
OTHER \bEY FEATURES
•
• You can reprogram a \fingle HomeLink® button by repeating Step 2
• Era\fing programmed button\f will delete all trained tran\fmitter\f
The Auto-Dimming Rearview Mirror i\f de\figned to help
reduce glare from a vehicle’\f headlight\f located in the
rear and al\fo connect up to three electronic tran\fmitter\f
in one location .
To turn automatic dimming ON or OFF, pre\f\f button F
HomeLink® with Auto-Dimming
Rearview Mirror*
How to Sync Transmitter with HomeLink®*
Erasing programmed buttons:
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection \fen\for
F Automatic dimming ON/OFF
\f Compa\f\f control button
If programming for the fir\ft time, begin with Step 1
(repeating thi\f \ftep will delete all information) .
To program non-rolling and rolling code garage door
opener\f and other device\f:
1 . Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly until the indicator light C begin\f to
fla\fh (to reprogram button\f, \fkip thi\f \ftep)
2 . Pre\f\f and hold the de\fired button A B D and hold
the button on the tran\fmitter while it i\f approximately
1 to 3 inche\f away from the mirror . The HomeLink®
Indicator light C will fla\fh rapidly once the frequency
\fignal ha\f been \fucce\f\ffully programmed
To fini\fh programming rolling code garage door opener\f,
complete the\fe \ftep\f:
3 . Locate the “learn” or “\fmart ” button on the garage
door’\f motor head unit . Pre\f\f and relea\fe the button
and complete Step 4 within 30 \fecond\f
4 . Firmly pre\f\f and relea\fe the programmed HomeLink®
button up to three time\f
Pre\f\f and hold the left A and center D button\f
\fimultaneou\fly for approximately 20 \fecond\f,
and then relea\fe both button\f within 30 \fecond\f .
Operating HomeLink®:
Pre\f\f one of the programmed HomeLink® button\f .REMINDER: Mirror indicator light C will illuminate when automatic dimming i\f ON .
If you\b ga\bage doo\b opene\b was manufactu\bed in \f011 o\b late\b, and you’\be unable to p\bog\bam you\b vehicle’s HomeLink® system, you may need to pu\bchase a HomeLink® Repeate\b Kit. Fo\b mo\be info\bmation, go to www.HomeLink.com o\b call (800) 355-3515 .
ABCDEF\f
QUICK TIPS