CD
@
®
©
®
®
(j)
Door handle
Audi side assist display
Power locking sw itches
Memory function buttons .. .. .
Aud i side assist button ...... .
A ir vents with thumbwheel
Control lever for:
- T urn signal and high beam
- Audi act ive lane assist . .. .. .
@ Mu ltifunction steering wheel
with:
- Horn
- Driver's airbag
- Driver information system but-
tons ... ..... ....... ... .. .
- Audio/video , telephone, navi
gation and voice recognition
buttons
- Steering wheel heating . ... .
- Shift padd les (automatic
transmission) ..... ... ... . .
® Instrument cluster ......... .
@ Head-up Display ........... .
@ Windshield washer system
lever ..................... .
@ Buttons for:
- MMI display
- Reset bu tton for tr ip odome-
te r .. .. ... .. ..... ... .. .. .
@ Starting the engine if there is a
malfunction ............... .
~ Knee airbag ........... .. .. .
@ Steer ing whee l adjustment, de
pending on equipment:
- mechan ical .......... .. .. .
- electrical .... .. ..... ... .. .
@ Leve r for:
- Cru ise control system ... .. .
- Adaptive cruise contro l .. .. .
@ Button for sw itch ing the Head
up Disp lay on/off, adjusting the
h eight .. ............. .. .. .
@ Instrument illumination ... .. .
@ Eng ine hood release ........ .
98
37
57
98
46
95
153
24
74
113
11
29
48
2 7
78
166
75
75
84
86
29
47
227
In strument s and control s 9
@ Data Link Connector for On
Board Diagnostics (OBD II)
@ Light switch ... .. . .. .... ... .
@ Buttons for :
- All-weather lights
- Night vision assistant .... .. .
- Rear fog lights .. .. .. ..... .
@ Power exterior m irror adjust-
ment ...... .. .. ..... ..... .
Rea r lid switch . .. . ......... .
Power w indows . .. .. ... .... .
MMI display
E mergency flashe rs
@ G love compartment ........ .
@) Front passenger's airbag .... .
@ Valet parking feature ..... .. .
@ Drives (MMI)
@ B uttons/Indicator lights fo r
- Start-Stop-System ........ .
- Parking system .. .. ..... .. .
- PASSENG ER AIR BAG OF F .. . .
- Rear spoiler .. .. . ......... .
- Electron ic Stabilization Con-
t rol .................... .
@ Climate controls, depending on
vehicle equipment:
- Three-zone cl imate control ..
- F our-zone automatic climate
cont rol ...... ........... .
@ Storage compartment or ash-
t ray wit h cigarette lighter .. ...
@ I S T ART ENGINE STOPI button
@ MM I controls
@ 12-volt socket, (upho lder
@ E lectromechanical parking
brake .................... .
@ Selector lever (a utomatic trans
mission)
(D Tips
30
44
44
105
44
so
38
41
4S
61
1S3
42
81
116
162
199
198
70
72
59 ,59
76
60,60
79
109
- Some of the equipment or fea tures
show n in the genera l ill ustration may be
standard equipment on your vehicle or
may be opt ional eq uipment depending
on your model. Always ask your
16 Instrum ent s and w arn ing /indic ato r light s
- If the indicator light and the message ap
pear
while dri ving , the emergency braking
function may not be available. It may not be
poss ible to set the parking brake or release
it once it has been set. Seek professional as
s istance .
(USA models): If the warning light
1111 and
the warning light
EiJ appear together, imme
diately contact your authorized Aud i dealer or
qualified workshop to have all brake pads in
spected
~ page 21 .
When the light comes on, an audib le warning
signal is also given.
.&_ WARNING
- Always observe the warnings in
~ page 22 7, before opening the hood
and checking the brake fluid .
- Driv ing with low brake fluid is a safety
hazard. Stop the car and get professional
assistance.
- If the 1111 (USA models)/ . (Canada
mode ls) brake system indicator light
tu rns on together with the ABS and ESC
indicator lights, the ABS/ ESC regu lating
function may have failed. Functions that
stabilize the vehicle are no longer availa
ble. This could cause the vehicle to
swerve and increase the risk of sliding.
Drive carefu lly to the nearest authorized
Audi dealer or other qualif ied workshop
and have the malfunction corrected .
- If the brake warning/indicator light does
not go out after a few seconds and the
park ing brake is released, or lights up
wh ile you are driv ing, the fluid level in
the brake f luid rese rvoir is too low . If you
believe that it is safe to do so, proceed
immedi ately at low speed to the nearest
authorized Aud i dealer o r qualified repair
facility and have the brake system in
spected.
- Always keep in mind that after several
brake applications, yo u will need g reater
pressure on the brake peda l to stop your
vehicle. Do not re ly on stra ined brakes to
respond w ith maximum stopp ing power in critical situations
. You must allow for
increased braking distances. The extra
distance used up by fading brakes could lead to an accident .
PARK/(®) Electromechanical parking brake
The warning/indicator light monitors the
electromechanical parking brake .
If the indicator light -(USA models) /.
(Canada mode ls) turns on, the parking brake
was set. If the parking brake is set when the
ignition is off, the indicator ligh t turns off af
ter about 20 seconds .
The warning/indicator light w ill go out when
the parking brake is re leased.
- (USA model s) /. (Canada m odel s)
Caut ion: Vehicle parked too steep
If the indicator l ight b links and the message
appea rs, there is not enough braking power to
keep the vehicle from roll ing. The b rakes have
overheated . The vehicle could roll away even
on a sma ll incline.
Pre ss brak e ped al to relea se parking brake
To re lease the park ing brake, press the brake
peda l and press t he button
@ii or sta rt driving
with sta rting assist at the same time
~ page 80.
Please re le ase parking brak e
To release the park ing brake manually, press
the brake pedal and press the button
@ii at the
same t ime. The parki ng brake only releases
automat ica lly if the driver's safety belt is fas
tened .
Ill Parking b rake!
If the Iii indicator lig ht t urns on and this
message appears, there is a parking brake
malfunction . Drive to your authorized Audi
dealer or qualified workshop immediately to
have the malfunct ion corrected.
Instruments and warning/indicator lights 19
II! Engine start system fault. Please con
tact dealer
If the indicator light turns on and the mes
sage appears, there is a ma lfunction in the en
gine start system.
Drive to your authorized Aud i dea le r immedi
ately to have the malfunction corrected.
~ Air suspension
Appl ies to vehicles: with air suspension
• Air suspension: system fault. Can contin
ue slowly with max. 35 mph .
There is a malfunct ion that can result in re
stricted dr iv ing stab ility.
Carefully drive at a maximum speed of 35
mph (60 km/h) to your authorized Audi dealer
or qua lified workshop to have the malfunction
cor rected.
• Air suspension: service mode. Vehicle
can only be moved with restrictions
Carefully drive to your authorized Audi dealer
or qualified workshop immediately to have
the service mode deactivated .
II Air suspension fault
There is a system ma lfunction that can result
in restricted driving stability or reduced
ground clearance.
Dr ive to your a uthorized Audi dealer immedi
ately to have the malfunction corrected .
II Air suspension: vehicle too low. Ground
clearance reduced
The ground clearance is very low due to a sys
tem malfunct ion . Wait until the air suspen
sion system has restored normal ground clear
ance. Otherwise, conditions such as an uneven
road surface can lead to vehicle damage.
G:;/ !f Safety systems
The fl (USA models) ;EI (Canada models) in
dicator light monitors the safety systems (e.g .
airbags, pretensioners) and illuminates for a few
seconds each time you switch the ignition
on .
If the fl (USA models);EI (Canada models)
indicator light does not go out, or if it illumi
nates while you are driving, or if it starts to
blink, then there is a malfunction somewhere
in the system.
If the light does not illum inate
when you switch the ign ition on, th is also
means there is a malfunct ion.
A WARNING
If you have a malfunction in the safety sys
tems, contact your authorized Audi dealer immediately. Otherwise the safety sys
tems may not work properly in an acc i
dent.
& Central indicator light
If the indicator light. or n turns on, check
the message in the instrument cluster .
nlft Electronic Stabilization Control
(ESC)
If the JjJ indicator light blinks while driving,
the ESC or ASR (Anti-Slip Regulation) is active
ly regulating.
If the
$.J indicator light turns on, the system
has switched the ESC off. In this case, you can
switch the ign ition off and then on to switch
the ESC on aga in. The indicator light turns off
when the system is functioning fu lly.
If the
1B indicator light turns on, ESC was re
stricted using the
1 .$ OFF I button c> page 196.
Stabilization control (ESC/ABS): Fault! See
owner's manual
If the G) indicator light and the ABS indicator
light
fJ] (USA mode ls) ;flJ (Canada models)
turn on and the message appears, the ABS or electronic differential lock is malfunctioning.
This also causes the ESC to malfunction . The
brakes still function with their normal power,
but ABS is not active .
liJI,
20 Instruments and warning /indicator lights
Drive to your authorized Audi dea ler or quali
fied workshop immediately to have the mal
function corrected .
.&_ WARNING
-
If the~ (USA models)/ . (Canada
models) brake system indicator light turns
on together with the ABS and ESC indica
tor lights, the ABS/ESC regulating function
may have failed. Functions that stabilize
the vehicle a re no longer available. This
could cause the vehicle to swerve and in-
crease the risk of sliding. Drive carefully to
the nearest authorized Audi dea ler or oth
er qualified workshop and have the mal
function corrected.
(D Tips
For additional information on ESC and
ABS, refer to~
page 196 .
ABS/(e} Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The warning/indicator light~ (USA mod
e ls)
;tiJ (Canada models) will come on for a
few seconds when the ignition is switched on.
The light will go out after an automatic check
sequence is completed.
There is a malfunction in the ABS when:
- T he warning/ indicator light does not illumi
nate when you switch the ign ition on.
- T he warning/ indicator light does not go out
after a few seconds .
- T he warning/indicator light illuminates
wh ile driving.
The ESC indicator light also illuminates if there is a malfunction in the ABS . The mes
sage
Stabilization control (ESC/ABS ): Fault!
See owner's manual
also appea rs in the in
strument cluster display and a warning tone
sounds.
The brake system will still respond even
without the assistance of the ABS system.
See your authorized Audi dealer as soon as possible to restore full braking performance.
For
more information regarding the ABS
¢page 196.
Malfunction in the brake system
If the brake warn ing light ¢ page 15 and the
ABS wa rning illuminate
together there may be
a malfunction in the ABS, and there may also
be a malfunction in the brake system itself
c:> .&.. The ABS will not work and you will no
tice a change in braking response and per
formance.
In the event of a malfunction in the brake
system
the warning/indicator light~
(USA models)/ . (Canada models) in the in
strument cluster flashes¢
page 15.
Malfunction in the electronic differential
lock (EDL)
The EDL works together with the ABS. The
ABS warning light will come on if there is a
malfunction in the EDL system¢
page 196 .
See your author ized Audi dealer as soon as
poss ible.
.&_ WARNING
- If the C]J (USA models)/ti] (Canada
models) warning light does not go out,
or if it comes on whi le driving, the ABS
system is not working properly. The vehi
cle can then be stopped only with the
standard brakes (without ABS). You w ill
not have the protect ion ABS provides.
Contact your Audi dealer as soon as pos
sible .
-USA models: If the ~ warning light,
the
J$J warning light and the~ warn
ing light come on together, the rear
wheels could lock up first under hard
b rak ing. Rear wheel lock-up can cause
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized Audi dealer or a quali
fied workshop . Drive slow ly and avoid
sudden, hard brake applications.
-Canada models: If the brake warning
light ., the
DJ warning light and the
ABS warning light
ti] come on together, ~
Instrument s and warnin g/indic ator ligh ts 21
the rear wheels could lock up first under
hard braking. Rear wheel lock-up can
cause loss of vehicle control and an acci
dent. Have your vehicle repaired immed i
ately by your authorized Audi dealer or a
qualified workshop. Dr ive slowly and
avo id sudden, hard brake applicat ions.
(0) Worn brake pads
IJ Brak e pads!
If the warn ing light illum inates, immediately
contact your author ized Audi dealer or quali
fied workshop to have all bra ke pads inspect
ed. O n USA models the wa rning light
IJ
comes on togethe r wi th the warn ing light
1111 . Both sets of brake pads on an axle
must always be replaced at the same time .
& WARNING
Driving with bad brakes can cause a colli
sion and serious personal injury.
- If the wa rning light IJ and the warning
light
11111 ) with the message B rake
pads ! comes on in the instrument cluster
display, immediately contact your au
thorized Aud i deale r or qualified work
shop to have all brake pads checked or replaced if necessary.
EPC Electronic powe r control
App lies to vehicles: with gaso line engine
This warning/indicator light monitors the
electronic power control .
The Ga warning/ indicator light (Electron ic
Power Control) illuminates when you switch
the ignition on as a function check .
@ Tips
If this warning/indicator light illuminates
while you are dr iving, then there is a mal
function in the engine electron ics. Have
the malfu nction corrected as soon as pos-
l ) - : USA models only
-
'
sible by your authorized Audi dealer or
qualified repair facility .
W Glow plug system
Applies to vehicles: with diesel eng ine
The control light illuminates when the glow
plug system is active.
If the II i ndicato r light illum inates, the g low
pl ug system is a ct ive. You sho uld start the en
gine immediately after the ind icator light
switches off. The indicator light only illum i
nates for approximate ly 1 second if the en
gine is warm or if the outs ide temperature is
above 46 QF (8 Q().
(l) Tips
-If the glow plug indicator light illum i
nates while dr iving, there is an eng ine
control malfunction. The engine should
be checked immed iate ly.
- If the ind icator light does not illuminate
at all when switch ing the ign it ion on,
there may be a malfunction in the glow
plug system. The engine sho uld be
ch ecked.
0 Malfunction Indicator Lamp (MIL)
T he Ma lf u nction Indicator Lamp ( MIL) is pa rt
of the On-Board Diagnostic (OBD II) system.
T he symbo l
¢.j lights up when the ignition is
switched on and will turn off after the engine
has started and has settled at a constant idle
speed. This indicates that the MIL is work ing
properly.
The warning lig ht ill uminates when there is a
malfunction in the engine electron ic system.
Contact your a uthorized Audi dea ler and have
the malfunction corrected.
An improperly closed fuel filler cap may a lso
ca use the MIL light to illuminate
c> page 221.
For more information c> page 30 .
24 Instr uments and warning/indicator lights
¢¢Turn signals
The indicator light blinks when you use either
turn signal .
Whenever you use the left II or the rig ht a
turn signal, the indicator light blinks. When
you use the emergency flashers, both indica
tor lights flash.
If one of the turn signal light bulbs burn out,
the turn signal will blink twice as fast as nor
mal. Carefully drive to your authorized Audi
dealer immediately to have the malfunction
corrected. The indicator light does not indi
cate a malfunction if a turn signal on the trail
er or on the vehicle fails in trailer towing
mode.
@ Tips
For more informat ion on the turn signals,
refer to
c::> page 46.
CRUISE/" (') Cruise control
The warning/indicator light (ij;(l)~i~ (USA mod
e ls)/ il (Canada mode ls) illuminates when
the cruise contro l is activated
c::> page 84.
Driver information
display
Overview
Fig. 4 Driver information system in the instrument
cluster
Fig. 5 Disp lay: example of the informat ion line
The driver information system contains infor
mation ® that is disp layed on tabs@
c::> fig. 4. The following content is possible de
pending on veh icle equipment:
@ ®
Tab Content
1 Vehicle functions :
On-board computer c::> page 26
Efficiency program* c::> page 26
Digital speedometer
Cruise control*
c::> page 84
Adaptive c ruise control and braking
guard*
c::> page 86
Audi active lane assist* c::> page 95
Display darkened
2 Indicator lights and messages
Warning when a door, the hood or
the rea r lid is not closed
Service interval display
c::> page 28
Speed warning system c::> page 84
3 Night vision assistant* c::> page 105
4 Audio/video
s Telephone*
6 Navigation*
The second and third tabs a re only vis ible if at
least one indicator lig ht or message is shown
or if that system is switched on.
T he status line © is located in the bottom
part of the display
c::> fig. 4. It displays the ex
terior temperature , time, se lector lever posi-
tion, trip odometer and odometer. ..,.
26 Instruments and warning /indicator lights
Resetting values to zero
.,. Se lect t he on -board computer / Efficien cy
program
men u item in the Vehicle func
tions
menu.
.,. You can now select between the long-term
memory and short -term memory .
.,. To reset the values i n a memory, press and
ho ld the thumbwhee l@ for one second .
Assigning a function to the
programmable steering wheel button*
.,. Se lect : ICAR !funct io n button> (Car )* sys-
tems
control button > Vehicle settings >
Ste ering wh eel button .
The last function se lected displays when y ou
switch the ignition on.
On-board computer
You can call up the following information in the on -board computer:
- D ate
- Drivi ng time ( h) from t he s ho rt- term memo-
ry
- Ave rag e consumption in MPG (l/ 100 km)
from the sho rt-term memo ry
- Ave rag e speed in mph (km/h) from the
s h ort-term memo ry
- Distance d riven in m iles (km) from the
sho rt-term me mory
- C urrent fuel co nsumption in MPG (l/100
k m)
- Sho rt-term memo ry overview
- Long-term memory overview
The s ho rt-term memo ry co llects driving i nfo r
mat io n from the time the ignit ion is switched
on until it is switched off. If yo u continue dr iv
ing within two hours after switching the igni
tion off, the new val ues a re i ncluded when cal
culating the cu rrent trip informa tion .
Unlike the short-term memory, the long-term
memory is not erased automatica lly. You can
select the time period for evaluat ing trip in
formation yo urse lf.
For some veh icle functions, you can access the
tr ip i nformat io n from the tempora ry memory
i n the line
(D ¢ page 24 , fig. 5.
The current fue l cons umption can be d is
played using a ba r
¢page 27, fig . 10. The
average cons umption (mpg) stored in the
short-term memo ry is also displayed. E lectri
ca l energy can be sto red in the battery when
t h e vehicle is coasting or dr iving dow nhill (re
c u pera tion) . The bar w ill move toward
Cl .
Efficiency program
The efficiency program can he lp y ou to use
less fuel.
It evaluates driving information in
reference to f uel consumption and shows ot h
er equipment influencing consumption as well
as shift recomme ndat ions .
¢ page 26. Fu el
eco nomy m essages
<=:> page 2 7 provide t ips
f o r efficient d riving. The effi ciency program
u ses d ist ance and cons umpti on d ata from trip
c om puter
1.
T o d is pl ay th e eff ic ien cy p rogram, call up Ve
hicle functions
and se le ct t he menu o ptio n
Efficiency program. If the d ata are dele ted in
t h e eff icien cy prog ram, th ose values a re a lso
reset in tri p com puter .
@ Tips
-All s tored v alu e s will be los t if th e ve hi
cl e battery is dis con nected .
- Fue l consum ptio ns (a ver age an d cu r
ren t), range an d s pee d ar e disp laye d in
metric un its on Canadian mode ls.
Other equipment
Fi g. 8 Tri p comp uter: ot her equi pm en t
Req uire ment: T he e fficiency p rogram m ust be
displayed
<=:> page 26 .
.,. Turn the thumbwheel u ntil the other eq uip-
ment appears in the d isplay . .,.
Instrument s and warning /indicator lights 2 7
Other equipment that is currently affecting
fuel consumption is listed in the efficiency
program. The display shows up to three other
items of equipment @. The equipment using
the most fuel is listed first. If more than three items using fue l are switched on, the equ ip
ment that is currently using the most f uel is
d isplayed .
A scale @ also shows the current total con
sumpt ion of all other equ ipment .
Fuel economy messages
Fig. 9 Dis p lay: exa mple of a fue l eco no m y m essage
F ue l economy messages are disp layed when
fuel consumption is increased by certain con
ditions. If you follow these fuel economy mes
sages, you can reduce your vehicle's consump
tion of fuel. The messages appear automati
cally and are only disp layed in the eff ic iency
p rog ram. The fuel economy messages turn off
au tom atically after a certa in period of time.
~ T o turn a n economy message off immediate
ly after it appears, p ress any b utton o n the
mult ifunct ion steer ing whee l.
@ Tips
-Once you have t urne d a fuel economy
m essage off, it will only appear again af
te r you turn the ignition o n aga in.
- The fuel economy messages ar e not dis
p layed in
every insta nce, but rat her i n in
t e rva ls
ove r a period of t ime .
Cylinder on demand System
Applies to veh icles: w ith 4.0 TFSI engine
Fi g. 10 Inst rumen t cl us ter : fu el cons umption
To save fuel, the engine automatically turns
fo ur cy linders on or off, depend ing on the
amount of power needed . Th is act io n is not
felt by the passengers .
Displaying cylinder mode
Requirement: the on -board comp ute r is d is
played ¢
page 26.
~ Turn the thumbwheel u nti l the current fuel
cons umption display is shown in the instru
ment cluste r.
If the green bar is displayed,
y o u are driving in 4-cy linder mode.
Basic requir ements for 4 -cylinder mode
4 -cylinder drive mode is used a utomat ica lly if
certain basic requirements a re f ulfille d. These
incl ude :
-A low power ou tpu t re qui rement.
- Dr iving in t hird gear or hig her.
- Engi ne speed between 960 and 3,500 RPM .
-A warm eng ine.
Odometer
Fig. 1 1 Instrumen t cluste r: Odo mete r and rese t but
to n