2014.5 Citroen C4 PICASSO RHD Owner's Manual

151
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). 
T he   engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
The "ECO" warning   lamp   comes   on   in   the  i
nstrument   panel   and   the   engine   goes   into  
s

tandby
 a
utomatically:
-
 
w
ith a manual gearbox,   at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   e-THP   130   and   165   petrol   versions  
a

nd   BlueHDi   100,   115   and   120   versions),  
w

hen   you   place   the   gear   lever   in   neutral,  
a

nd   you   release   the   clutch   pedal,
-
 
w
ith an electronic gearbox,   at   speeds  
b

elow   5   mph   (8   km/h),   when   you   press   the  
b

rake   pedal   or   place   the   gear   selector   lever  
i

n position N ,
-
 
w
ith an automatic gearbox, with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds   then   goes  
o

f f.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 c
ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
START/STOP
 
button.
4
driving

152
Going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-
 
w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal,
-
 
w

ith an electronic gearbox:
●
 
g

ear   selector   lever   in   position   A or M,
when
  you   release   the   brake   pedal,
●
 
o

r
 
gear   selector   lever   in   position   N
and
  the   brake   pedal   released,   when  
y

ou   place   the   gear   selector   lever   in  
p

osition

A or M ,
●
 
o

r
 
when   you   engage   reverse   gear.
-
 
w

ith an automatic gearbox:
●
 
g

ear   selector   in   position   D or M, when
you
  release   the   brake   pedal,
●
 
o

r
 
gear   selector   in   position   N   and   brake  
p

edal   released,   when   you   place   the   gear  
s

elector in position D or M ,
●
 
o

r
 
when   you   engage   reverse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   15   mph  
(

25   km/h)   with   a   manual   gearbox   (2 mph  
(

3   km/h)   with   e-THP   130   and   165   petrol  
v

ersions   and   BlueHDi   100,   115   and  
1

20   versions),   7   mph   (11   km/h)   with   an  
e

lectronic   gearbox   and   2   mph   (3   km/h)   with  
a

n   automatic   gearbox,
-
 
t
he   electric   parking   brake   is   being   applied,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automatically
If the system has been deactivated in   STOP   mode,   the   engine   restarts  
i

mmediately.
Deactivation
  of   Stop   &   Start   is   done   in   the  
"
D

riving assistance
"  menu.
Deactivation
In this case the "ECO" 
warning   lamp  f
lashes   for   a   few   seconds,   then   goes  
o

f f.
This operation is perfectly normal. Press
  this   button   to   deactivate   the  
s

ystem.
This   is   confirmed   by   the   indicator  
l

amp   in   the   button   and   this   symbol.
When   driving   on   a   flooded   road,   it   is  
r

ecommended   that   the   Stop   &   Start  
f

unction   be   deactivated   and   that   you  
d

rive   very   slowly.
Driving

153
The system is reactivated automatically every   time   the   engine   is   started   by  
t

he driver.
Reactivation
Press this button again.
Operating fault
Have it checked by a CITROËN dealer or a q ualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.
All of the instrument panel warning lamps come on.Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever on position N   and   put   your   foot  
o

n   the   brake   pedal.
It
  is   then   necessary   to   switch   off   the   ignition  
a

nd   start   the   engine   again   using   the   "START/
STOP"
  button.In
 
t
he  
e
vent  
o
f  
a
 
f
ault  
w
ith  
t
he  
s
ystem,  
t

he   symbol   for   the   button   changes  
t

o   alert   mode   and   the   warning   lamp  
f

lashes   for   a   few   moments   then  
c

omes   on   continuously.
The
 
system
 
is
 
active
 
again;
 
this
 
is
 
c

onfirmed
 
by
 
the
 
indicator
 
lamp
 
in
 
the
 
b

utton
 
going
 
off
 
and
 
illumination
 
of
 
t

his
 
symbol.
The  Stop   &   Start   system   makes   use   of  
a

dvanced   technology.   For   any   work   on  
t

he   system   go   to   a   qualified   workshop  
w

ith   the   skills   and   equipment   required,  
w

hich   a   CITROËN   dealer   is   able   to  
pro

vide.
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
Maintenance
This system requires a 12 V battery with a special   specification   and   technology   (reference  
n

umbers   available   from   CITROËN   dealers).
Fitting
  a   battery   not   listed   by   CITROËN  
i

ntroduces   the   risk   of   malfunction   of   the  
s

ystem.
For
  charging,   use   a   12   V   charger   and   do   not  
r

everse   the   polarity.
4
Driving

154
Display of inter-vehicle time
Using a radar located at the front of the vehicle, this   system   helps   the   driver   maintain   a   safe  
d

istance   between   their   vehicle   and   the   one   in  
f

ront,   by   displaying   the   current   inter-vehicle  
t

ime   in   the   instrument   panel.
It
  is   the   time   interval,   expressed   in   seconds,  
t

hat   separates   two   vehicles   in   line.   The  
r

ecommended   safe   value   is   about   2   seconds:  
r

efer   to   the   legislation   or   highway   code   in   force  
i

n   your   country.Conditions for display
The measurement is displayed for information   only:   the   system   takes   no a

ction   on   the   vehicle.
This
  system   does   not   in   any
 c

ircumstances   replace   the   need   for
 v

igilance   on   the   part   of   the   driver   who
 m

ust   remain   in   control   of   the   vehicle   at
 a

ll   times.
The
  system   is   not   designed   for   urban
 u

se
 
nor
 
for
 
more
 
dynamic
 
driving
 
(bends,
 a

cceleration,   harsh   braking…)   but   rather
 w

hen   driving   at   a   steady   speed.
The
  system   is   active   in   a   speed   range  
b

etween   42   and   93   mph   (70   and  
1

50 km/h).
Stationary   vehicles   and   certain   other  
r

oad   users   (such   as   bicycles   for  
e

xample)   are   not   detected.
The   system   displays   inter-vehicle   time  
v

alues   of   between   3   seconds   and   0.5   of  
a

  second.
Below   0.5   of   a   second,   the   value  
d

isplayed   is   maintained   at   this   level,  
e

ven   if   the   true   inter-vehicle   time   is   less.
The   active   cruise   control   must   not  
b

e   selected   (the   active   cruise   control  
i

nformation   is   displayed   instead   of   that  
f

or   the   inter-vehicle   time).
The   system   is   only   available   with   the  
"

DRIVING"   display   mode   of   the   type   2  
in

strument
 pan
el.
Driving

155
Once the speed conditions are met, a symbol is displayed in the instrument panel.
Displays
SymbolAssociated message Comments
No
  vehicle   detected   by   the   radar.
A
  vehicle   is   detected   but   the   inter-vehicle   time   is   more   than   3   seconds.   No   value   is  
d

isplayed.
A
  vehicle   is   detected.   The   inter-vehicle   time   is   3   seconds   or   less.   The   minimum   value  
d

isplayed   is   0.5   seconds,   even   if   the   true   inter-vehicle   time   is   lower.
4
Driving

156
SymbolAssociated message Comments
"SYSTEM
  INACTIVE:   Speed  
un

suitable" If
  the   speed   of   your   vehicle   is   outside   the   operating   range.
Where
  the   speed   is   not   suitable,   a   message   is   displayed   while   the   speed   is   outside   limits  
(

below   42   mph   (70   km/h)   or   above   93   mph   (150   km/h),   approximately).   However,   when  
d

ecelerating,   the   system   is   deactivated   below   27   mph   (45   km/h).
"SYSTEM
  INACTIVE:   Visibility  
r

educed" The
  system   switches   to   standby   automatically   if   the   sensor   does   not   detect   the   vehicle   in  
f

ront   correctly   (very   difficult   weather   conditions,   sensor   out   of   adjustment,   ...).
Driving

157
The vehicle being followed may not be detected in   certain   conditions   such   as,   for   example:
-
 
w
hen   turning,
-
 w

hen
 c
hanging
 lan
e,
-
 
w
hen   the   vehicle   in   front   is   out   of   the   range  
o

f   the   sensor   (maximum   range:   around  
1

00 m).
Operating limits
In the event of a fault with the system, this   warning   lamp   is   displayed a

ccompanied   by   a   message.
Operating fault
Have the system checked by a CITROËN dealer   or   a   qualified   workshop.
At
  the   first   use   of   the   system   after  
r

epair,   a   message   may   be   displayed  
i

ndicating   that   the   system   is   initialising.  
T

he   system   is   not   available   while   this   is  
i

n   progress.   As   soon   as   the   message  
d

isappears   the   system   is   operational  
a

gain.   If   the   message   does   not  
d

isappear,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop. The
  operation   of   the   radar,   located   in  
t

he   front   bumper,   may   be   disturbed   by  
a

ccumulations   of   grime   (dust,   mud...)  o
r   in   certain   weather   conditions   (snow,  i
ce...).
The
  message   "SYSTEM   INACTIVE:  
V

isibility   reduced"   is   displayed   to   signal  
t

hat   the   system   has   been   put   into  
s

t a n dby.
Clean
  the   front   bumper   regularly.
4
Driving

158
Memorising speeds
Memorising
This function allows speeds to be saved, which can then be offered to set the two systems: the speed limiter (to limit the speed of the vehicle) or the c
ruise   control   (for   a   vehicle   cruising   speed).
You
  can   memorise   up   to   six   speed   settings   for   each   of   the   two   systems.   By   default,   some   speed   settings   are   already   memorised.
F

Sel
ect the "Driving assistance "
menu.
For
  safety   reasons,   the   driver   must  
c

arry out these operations when
stationary.
F
 
S
elect   the   system   for   which   you   want   to  
m

emorise   new   speed   settings:
This function is accessible in the touch screen
tablet.
F
 
E
nter   the   new   value   using   the   numerical  
k

eypad   and   confirm.
F
 
C
onfirm   to   save   the   modification   and   quit  
t

he   menu.
●
 
s
peed   limiter
●
 
c
ruise   control.
or
F
 
I
n   the   secondary   page,   press   "Speed
settings ".
F
 
P
ress   the   button   corresponding   to   the  
s

peed   setting   you   want   to   modify.
Driving