2014.5 Citroen C4 CACTUS RHD Owner's Manual

23
Under-inflationfixed,   accompanied   by  a
n   audible   signal   and  
a

  message. The
  pressure   in   one   or   more   tyres   is  t
oo   low.Check
  the   tyre   pressures   as   soon   as   possible.
This   check   should   preferably   be   carried   out   when   the  
t

yres   are   cold.
You
  must   reinitialise   the   system   after   the   adjustment  
o

f   one   or   more   tyre   pressures   and   after   changing   one  
o

r   more   wheels.
For
  more   information,   refer   to   the   "Under-inflation  
d

etection"
 s
ection.
+ flashing
  then   fixed,  
a

ccompanied   by   the  
S

ervice   warning   lamp.The
  system   has   fault:   the   tyre  
p

ressures   are   no   longer   monitored.Check
  the   tyre   pressures   as   soon   as   possible.
Have
  the   system   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Foot on the
brake pedal flashing,
 a

ccompanied
 b

y   an   audible   signal  
a

nd   a   message,   and  
a

ssociated   with   the  
"

Foot   on   the   brake"  
w

arning   flashing   in   the  
c

ontrol panel for the
electronic
 ge

arbox.The
  brake   pedal   is   not   pressed   when  
s

tarting   the   engine,   with   an   electronic  
g

earbox.With
  an   electronic   gearbox,   press   the   brake   pedal   to  
s

tart   the   engine.
If
  you   wish   to   release   the   parking   brake   without  
p

ressing   the   brake   pedal,   this   warning   lamp   will  
r

emain   on.
flashing. With
  an   electronic   gearbox,   if   you  
h

old   the   vehicle   on   an   incline   using  
t

he   accelerator   for   too   long,   the  
c

lutch   overheats.Use
  the   brake   pedal   and/or   the   parking   brake.
Warning / indicator lamp
StateCause Action / Observations
1
Monitoring

24
Service indicator
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the s
panner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Indicators
The point at which the next service is due is calculated   from   the   last   indicator   zero   reset,  
d

epending   on   the   distance   travelled   and   the  
t

ime   elapsed   since   the   last   service.
For
b
l
ueH
di
d
i
esel versions, the
degree
  of   deterioration   of   the   engine   oil  
i

s   also   taken   into   account   (depending  
o

n   the   country   of   sale).
Monitoring

25
Service overdue
For 5 seconds after the ignition is switched on, the
s panner flashes  to   indicate   that   the   service   must b

e   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
For
b
l
ueH
di
d
i
esel versions, this alert
may
  also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on.
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on .The
  distance   remaining   may   be  w
eighted   by   the   time   factor,   depending  o
n   the   driving   conditions.
Therefore,
  the   spanner   may   also   come  
o

n   if   you   have   exceeded   the   period  
s

ince   the   last   service,   indicated   in   the  
ma

nufacturer's
 ser
vice
 s
chedule.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon. For
b
l
ueH
di
d
i
esel versions, the
spanner
  may   also   be   brought   on   earlier  
t

han   expected,   depending   on   the  
d

egree   of   deterioration   of   the   engine   oil  
(

depending   on   the   country   of   sale).
The
  rate   of   deterioration   of   the   engine  
o

il   depends   on   the   driving   conditions   in  
w

hich   the   vehicle   is   used.
1
Monitoring

26
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If
  you   have   carried   out   the   service   on   your  
v

ehicle
 y
ourself:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   button   on   the   end   of   the  
l

ighting   control   stalk,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any time   in   the   touch   screen   tablet.
F

Sel
ect the "Driving assistance "
menu.
F
 
I
n   the   secondary   page,   select  
"D

iagnostic".
The
  servicing   information   is   displayed   in  
t

he screen.
Monitoring

27
Engine oil level indicator*
On versions fitted with an electric oil level indicator,   the   state   of   the   engine   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds,   after   the   servicing   information.
The
  level   read   will   only   be   correct   if  
t

he   vehicle   is   on   level   ground   and   the  
e

ngine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level incorrect
This is indicated by the display of the message "Oil   level   incorrect"   in   the   instrument   panel  
s

creen,   accompanied   by   the   service   warning  
l

amp   and   an   audible   signal.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
a

void   damage   to   the   engine.
Oil level indicator fault
This is signalled by the display of the message "Oil   level   measurement   invalid"   in   the  
in

strument
 pan
el.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Refer
 
to
 
the
 
"Checking
 
levels"
 
section.
*
 
Depending
 
on
 
version. In
  the   event   of   a   fault   with   the   electric   indicator,  
t

he   oil   level   is   no   longer   monitored.
If
  the   system   is   faulty,   you   must   check   the  
e

ngine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
1
Monitoring

28
7-inch touch screen tablet
The touch screen tablet gives access to:
-  t he   heating/air   conditioning   controls,
-
 
t
he   trip   computer   for   settings   for   certain  
v

ehicle functions,
-
 
a
udio   system   and   telephone   controls,
-
 
i
nteractive   help,   sound   settings   and   the  
b

rightness   of   instruments   and   controls,
and,
  depending   on   equipment:
-
 
t
he   controls   for   the   navigation   system   and  
c

onnected
 s
ervices.
For reasons of safety, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some
  functions   are   not   accessible  
w

hen
 d
riving.General operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  tablet   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do
  not   touch   the   tablet   screen   with   wet   hands.
Uses a soft clean cloth to clean the tablet touch
screen. Use
  this   button   to   go   to   the  
s

econdary
 pag
e.
Use this button to return to the
primary
 pag

e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm   and   save  
t

he   changes.
Use
  this   button   to   quit.
Principles
Use the buttons on either side of the screen for   access   to   the   menus,   then   press   the   virtual  
b

uttons   in   the   touch   screen.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
In
 
very
 
hot
 
conditions,
 
the
 
system
 
may
 
g

o
 
into
 
standby
 
(display
 
and
 
sound
 
off)
 
f

or
 
a
 
minimum
 
period
 
of
 
5
 
minutes.
State of indicator lamps
Some buttons contain an indicator lamp that g ives   the   state   of   the   corresponding   function.
Green
  indicator:   you   have   switched   on   the  
c

orresponding
 f
unction.
Orange
  indicator:   you   have   switched   off   the  
c

orresponding
 f
unction.
Monitoring

29
* Depending on equipment.
"
A
ir conditioning
"
allows
 
control
 
of
 
the
 
settings
 
for
 
t

emperature
 
and
 
air
 
flow.
" Driving assistance "
allows
 
access
 
to
 
the
 
trip
 
computer
 
a

nd
 
certain
 
vehicle
 
functions
 
to
 
be
 
a

ctivated,
 
deactivated
 
and
 
adjusted.
" Media "
allows
 
selection
 
of
 
a
 
radio
 
station,
 
t

he
 
various
 
music
 
sources
 
and
 
the
 
d

isplay
 
of
 
photographs.
" Navigation "*
allows
 
settings
 
for
 
navigation
 
and
 
the
 
c

hoice
 
of
 
a
 
destination. "
Configuration "
allows   sound   settings   and   the  
b

rightness   of   instruments   and  
c

ontrols   to   be   adjusted   and   gives  
a

ccess to the interactive help for the
main   vehicle   systems   and   warning  
lam

ps.
" Connected services "*
allows connection to an applications
portal   to   facilitate,   make   safe   and  
p

ersonalise   journeys   by   means  
o

f   a   connection   key   available   on  
s

ubscription   from   a   CITROËN   dealer.
" Telephone "
allows   the   connection   of   a   mobile  
t

elephone   via   Bluetooth.
Touch screen tablet menus
For the Air conditioning 
menu,   refer   to  t
he   "Comfort"   section. For the Media
, Navigation, Connected
Services  and   Telephone  menus,   refer  
t

o   the   "Audio   and   telematics"   section.
1
Monitoring

30
State of adjustable systems
Operating fault
In the event of a fault with one of these
systems,  the   indicator   lamp   in   the   activation/
deactivation
  button   flashes   for   a   few   moments.
An
  alert   symbol   is   displayed   to   the   right   of   the  
b

utton   symbol,   then,   in   the   case   of   systems   that  
a

re   activated   by   default,   the   orange   indicator  
c

omes   on   permanently.
Every
  time   the   button   is   pressed,   the   indicator  
f

lashes   for   a   few   moments. Example:
●
 
F
unction   not   activated.
●
 
O
perating   fault   alert.
then
"Driving assistance" menu
Some systems have a dedicated button, to w hich   is   associated   an   indicator   lamp.
Illumination
  of   this   lamp   indicates   whether   the  
s

ystem   is   activated   or   deactivated   compared   to  
t

he   default   (factory)   setting.
Green
  indicator:   you   have   switched   on   the  
c

orresponding   system.
Orange
  indicator:   you   have   switched   off   the  
c

orresponding   system.
Monitoring