2013 VOLKSWAGEN TOUAREG display

The Bluetooth audio source needs to be connected to the Infotainment System via the telephone
control .
The = Bluetooth audio (A2DP)feature needs to be activated in the Bluetooth settings via the Telephone
settings menu.
Starting playback via the vehicle speakers
Before connecting or playing an external audio source, turn down the base volume on the Infotainment
System.
Playback is started and stopped via the Bluetooth audio source.
You need to switch over the system in the Audio menu to playback the Bluetooth audio source over
the vehicle loudspeakers .
AUX/Bluetooth audio is displayed on the Infotainment System screen.
Playback control
The extent to which the Bluetooth audio source can be controlled using the infotainment system
depends on the Bluetooth audio source connected up.
With media players which support the AVRCP Bluetooth profile, replay can be automatically stopped
or started at the Bluetooth audio source, when switching to Bluetooth audio or another audio source. A
track can also be displayed or changed via the infotainment system.
As a general rule, it is not possible to display a list of track or select various playback modes using
Bluetooth audio sources.
.Due to the large number of different Bluetooth media players available, it is not possible to
guarantee operation of all functions described here.
.On a connected Bluetooth audio source, all warning and service tones, such as touch tones on
a mobile phone, should be switched off to avoid interference and malfunctions.
.Always switch off the warning and service tones on a connected Bluetooth audio source,
e.g. key tones on a mobile telephone, to prevent interference noise and malfunctions.
.Do not connect an external media player to the infotainment system for playback via Bluetooth
and via the MEDIA-IN multimedia interface at the same time as this may lead to problems in
playback.
AUX volume: adjusting playback volume
.

x Move the slider ?to change the setting .
Adjusting the output volume
If the sound from the external audio source is too quiet, if possible, increase the output volume on
the audio source. If that is not sufficient, increase the AUX volume.
If the sound from the connected audio source is too loud or distorted, if possible, lower the output
volume on the audio source. If that is not sufficient, decrease the AUX volume.
.The AUX volumefunction key is only displayed if the playback volume for the connected audio
source can be adjusted.

iPod® and iPhone®
When an iPod® or iPhone® is connected, a special iPod selection menu is displayed at the top
selection level similar to the Media center selection menu There you can select list views specific
to the iPod  Playlists,  Artists,
 Albums,  Songs,  Podcasts etc.).
The iPod selection menu is used as normal.
The music control of a connected iPod® or iPhone® is disabled.
The output volume of some iPods® or iPhones® can be adjusted to the volume of the other audio
sources .
Files cannot be imported from an iPod® or iPhone®. The setting for the Repeatfeature cannot be
changed.
Possible error messages after connecting an external data medium

Error message Cause Remedy
Device is not
supported.
Playback of the external data
medium or communication via the
adapter cable is not possible.
Check the adapter cable.
Update software of the MEDIA-IN
multimedia jack via the Volkswagen
dealer.
If possible, update the software of the
external data medium.
Device not
functional
Communication malfunctioning. Verify the connection and functionality
of external data medium.


Due to the large number of different types of data media and several iPod® and iPhone®
generations, no guarantee can be made that all functions described can be executed without errors.

Opening the DVD film menu manually
The DVD film menu must be opened manually if the DVD film menu does not open automatically with
the unit's own menu control, or if the video DVD is already being played.
x In the video DVD menu, press the Menufunction key to open the unit's own menu control .
x If an introduction is playing, it can be skipped by pressing the Menufunction key in the unit's own
menu control ⇒ fig. 157 (B).
The DVD film menu is displayed (A).
DVD does not start!
Note that an inserted DVD cannot start automatically if the volume is set to “0” (display: +). A played
media source is always stopped (paused) in this case.
.The visual appearance of the DVD film menus and the menu options which it offers are the
responsibility of the DVD manufacturer.
.The language of a video DVD for voice output can be changed .
.The DVD manufacturer is responsible for the different ways in which individual films respond to
identical commands.
Video DVD menu: controlling playback and changing display settings

Fig. 158 Video DVD menu.
.

x Press the NAVInfotainment button twice in quick succession. After changing to the map display, the
main menu Navigation is displayed.
x Press the e function key to switch menu by menu from a navigation submenu to the Navigation
main menu.
x You can switch back and forth between the map view and the Navigation main menu by pressing
the NAVInfotainment button.
The Navigation main menu is displayed either in “normal” Destination mode or in Tour mode or as the
Waypoint navigation menu ⇒ fig. 201.
If Tour mode ⇒ fig. 161 is displayed .
If the Waypoint navigation menu is displayed .
Display of the last destination
In the upper third of the screen, the destination last used as route guidance is displayed.
x Briefly touch the display box to show the displayed destination in the detailed view.
x Press the New destinationfunction key followed by the + Addressfunction key to show the displayed
destination in the Address entry menu and edit it .
If no destination is displayed, this means no route guidance has been started or that the
destination memory has been deleted manually .
Function keys in the Navigation main menu

Function key: Effect
Options : Defines route options for calculating a route .
Position : opens the current position in the detailed view and displays the coordinates.
Store : stores the displayed position in the destination memory .
D: Stores the current position as a “Flagged destination” in the destination memory .
': Enter home address or show home address in the Navigation main menu .
New destination : opens the selection menu for entry of destination .
Memory: Opens a pop-up window for storing the current destination, loading stored destinations or
managing destinations .
Route: Opens options for route guidance .
Route list: Shows street names or street designations of the route section to be driven.
Remove area to avoid: Removes an entered route exclusion.
Avoid area: To enter a route exclusion.
Extras: opens a pop-up window.

Accept new stopover: for entering a stopover .
Tour mode: for switching to tour mode in order to drive to several destinations during route
guidance .
Offroad: for navigation in off-road areas (waypoint navigation) .
Start: Starts route guidance to the displayed destination .

In the Select a street menu, the towns where you can search for a street name are listed. The
town currently selected in the Address entry menu is displayed at the top of the list.
x Press a function key with a town name to search for a newly entered street in that town.
x OR: Press the In all citiesfunction key to search for a street name across the country.
Further function keys in the Address entry menu
Store 1):Store the displayed destination in the destination memory after assigning an entry name .
Points of interest: Select a point of interest .
Map 1):: Select the destination from the map view in the vicinity of the entered address .
Start 1):Starts route guidance to the displayed destination .
Search for points of interest using point of interest categories

Fig. 167 Selection for point of interest search.

Fig. 168 Special destination detailed view.
.

Quick search for important points of interest in your location
x Press the Important categoriesfunction key to open a list of frequently used point of interest
categories.
x Press one of the categories to select it (in fig. 170: Hotels).
The nearest ten points of interest in the selected category are shown in a list .
Special destination search by selecting a search area and a point of interest category
In the Search for points of interest menu, you can set a search area for the point of interest
search .
In immediate vicinity : Area around current vehicle position.
In vicinity of destination6: Area around last destination.
Along the route7: Along the calculated route.
In a new city: Select country and town as center of search area.
Nationwide: Whole of country you are currently driving in.
x Press to select search area .
x Then press to select the desired point of interest category ⇒ fig. 169.
x Some point of interest categories contain further sub-categories that are revealed upon pressing.
The points of interest found in the search area for the selected point of interest category are displayed
in a list .
Select point of interest from list and show in detailed view
The nearest points of interest are displayed at the top of the list of points of interest that have been
found.
If the immediate vicinity has been selected as the search area, additional distance and direction details
will be displayed -.
The distances and directions initially refer to the route as the crow flies. The arrow -.is shown “not
filled in”.
In the background, the Infotainment System starts to calculate the route to the nearest points of
interest in the list. Points of interest for which a possible route has been calculated are displayed with
a “filled in” arrow. In this case, the actual distance to be driven is displayed.
The selection of points of interest can be narrowed down further by entering a name .
x Touching a point of interest in the list shows the point of interest in the detailed view ⇒ fig. 168.
Selection options in the detailed view
' Opens a list where you can select other points of interest with the same address.
, Stores the points of interest in the destination memory .
. Shows the point of interest on the map.
Start: Starts route guidance to the point of interest.
 2): Makes a call to a displayed telephone number.

6 Only if a destination has already been set.
7 Can only be selected during route guidance.

Show details: Shows the destination in the detail view.
Show destination on map: Shows the destination on the map .
Loading a destination from the directory
The Load from directory menu only displays directory entries for which route guidance can be
started (display: symbol 3)
The directory needs to be opened for editing in order to display or edit all directory entries .
x Press the * Directoryfunction key ⇒ fig. 162.
x Press the desired directory entry in the Load from directory menu.
x If more than one navigation destination is stored for a directory entry, you then need to select the
desired navigation destination by touching the screen.
x Press one of the following options in the Destination details menu.
Start route guidance: Starts route guidance .
Add as stopover: Allows you to add the destination to the tour plan .
Enter/show destination on map: Shows the destination on the map .
You can also search for directory entries using a search function.
x Press the Searchfunction key and search for the directory entry by entering the entry name in an
input window .