2013 TOYOTA LAND CRUISER Owners Manual

369 3-2. Using the audio system
3
Interior features
LC200_OM_OM60F57U_(U)
■Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1 sec-
ond or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■Canceling random, repeat and scan playback
Press
(RAND), (RPT) or again.
■Error messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.

370 3-2. Using the audio system
LC200_OM_OM60F57U_(U)
■Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not play correctly.
■CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
■If CDs are left inside the CD player or in the ejected position for
extended periods
CDs may be damaged and may not play properly.
■Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.

371 3-2. Using the audio system
3
Interior features
LC200_OM_OM60F57U_(U)
NOTICE
■CDs and adapters that cannot be used
Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the player and/or the CD insert/eject function.
●CDs that have a diameter that is not 4.7
in. (12 cm).
●Low-quality and deformed CDs.
●CDs with a transparent or translucent
recording area.
●CDs that have tape, stickers or CD-R
labels attached to them, or that have
the label peeled off.

372 3-2. Using the audio system
LC200_OM_OM60F57U_(U)
NOTICE
■Player precautions
Failure to follow the precautions below may result in damage to the CDs or
the player itself.
●Do not insert anything other than CDs into the CD slot.
●Do not apply oil to the player.
●Store CDs away from direct sunlight.
●Never try to disassemble any part of the player.
●Do not insert more than one CD at a
time.

373
3-2. Using the audio system
3
Interior features
LC200_OM_OM60F57U_(U)
Playing back MP3 and WMA discs
Loading and ejecting MP3 and WMA discs
P. 3 6 5
Selecting a CD
P. 3 6 5
Playing and pausing files
To play or pause a file, press ( ).

Power Volume
CD eject
Random playbackRepeat playFolder selection
CD insert
File selection Display text message
CD selection Playback
Selecting a file,
fast forwarding
or reversingCD slot
Search playback
Playback/pause

374 3-2. Using the audio system
LC200_OM_OM60F57U_(U)
Selecting and scanning a folder
■Selecting folders one at a time
Press () or () to select the desired folder.
To return to the first folder, press and hold () until you hear a
beep.
■Selecting the desired folder by cueing the first file of each
folder
Press and hold until you hear a beep.
When the desired folder is reached, press the switch once again.
Selecting and scanning a file
■Selecting one file at a time
Turn the dial or press “” or “” on to
select the desired file.
■Selecting the desired file by cueing the files in the folder
Press .
When the desired file is reached, press once again.
Fast forwarding and reversing files
Press and hold “
” or “” on .

375 3-2. Using the audio system
3
Interior features
LC200_OM_OM60F57U_(U)
Random playback
■To play files from a particular folder in random order
Press (RAND).
■To play all of the files on a disc in random order
Press and hold (RAND) until you hear a beep.
Repeating a file or a folder
■Repeating a file
Press (RPT).
■Repeating a folder
Press and hold (RPT) until you hear a beep.
Switching the display
Press .
Each time the switch is pressed, the display changes in the order of
Folder no./File no./Elapsed timeFolder nameFile nameAlbum title
(MP3 only)Track titleArtist name.

376 3-2. Using the audio system
LC200_OM_OM60F57U_(U)
■Display
P. 369
■Canceling random, repeat and scan playback
Press
(RAND), (RPT) or again.
■Error messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up-side down.
“NO MUSIC”: This indicates that the MP3/WMA file is not included in the
CD.
■Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
■CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
■If CDs are left inside the CD player or in the ejected position for
extended periods
CDs may be damaged and may not play properly.