2013 RENAULT KANGOO Mechanism And Accessories Workshop Manual

SIDE OPENING ELEMENT MECHANISMS
Door opening handle - exterior, front door
51
PRB5102
Disconnect the control linkage for locking the
door and opening it from the outside.
REMOVING
First remove the trim (see section 72) and the anti-
tamper shield. Then remove the handle mounting
bolt.
12981R
12980S
51-3

SIDE OPENING ELEMENT MECHANISMS
Front door lock
51
PRB5104
- the interior slide rail (A).
Disconnect the control linkage for locking the
door and opening it from the outside.
Remove the fittings securing the lock (B).
Disconnect the electric harness, depending on the
version.
REMOVING
After removing the trim (see section 72), remove:
12982R
12983R
- the anti-tamper shield (1) from the lock,
51-4

SIDE OPENING ELEMENT MECHANISMS
Front door window riser
51
PRB5105
Take out the mechanism.
REMOVING
First remove the trim. Then move the window into
the fully open position and remove the fittings se-
curing the mechanism.
12983R2
Disconnect the mechanism from the window.
Disconnect the wiring harness, depending on the
version.
12984S
51-5

SIDE OPENING ELEMENT MECHANISMS
Door barrels
51
PRB5106
First remove the exterior door handle. Then open
out the clips and take out the barrel.
REMOVING
12974R
51-6

SIDE OPENING ELEMENT MECHANISMS
Interior handle for opening the sliding door51
Remove the mounting bolt.
Unclip the opening control cable.
REMOVING
13102R
PRB5103
51-7

SIDE OPENING ELEMENT MECHANISMS
Exterior handle for sliding door
51
PRB5103
- the opening control cable (2).
Remove the mounting bolts (3).
REMOVING
First remove the trim (see section 72) and then un-
clip:
- the linkage for the door locking warning light
(1),
13159R
51-8

SIDE OPENING ELEMENT MECHANISMS
Locking warning light and sliding door lock51
13158R
First remove the trim. Then perform the following operations:
REMOVING THE WARNING LIGHT
Release the mounting clips (1), linkage (2) and control cable (3).
REMOVING THE LOCK
Remove the mounting bolts.
Disconnect the wiring harness, depending on the version.
Disconnect the control cables.
51-9

SIDE OPENING ELEMENT MECHANISMS
Sliding door runners
51
12979R
REMOVE THE MOUNTING FITTINGS FOR THE
RUNNER IN MID-HEIGHT POSITION REMOVING THE SLIDING DOOR
12978R
- Take out the rear stop.
13105R
- Remove the shaft.
REMOVE THE MOUNTING FITTINGS FOR THE
UPPER RUNNER
Remove the interior trim.
12977R
51-10