Page 16 of 51
SIDE OPENING ELEMENT MECHANISMS
Sliding door runners
51
12979R
REMOVE THE MOUNTING FITTINGS FOR THE
RUNNER IN MID-HEIGHT POSITION REMOVING THE SLIDING DOOR
12978R
- Take out the rear stop.
13105R
- Remove the shaft.
REMOVE THE MOUNTING FITTINGS FOR THE
UPPER RUNNER
Remove the interior trim.
12977R
51-10
Page 19 of 51
SIDE OPENING ELEMENT MECHANISMS
Adjusting the sliding door
51
13155S
3Adjust the mid-height bracket to obtain clea-
rances A and C.
1Adjust the height of the lower bracket so that
clearances B and D are obtained.
13157R
13156R
2Adjust the upper bracket to balance the clea-
rance (A).
51-13
Page 48 of 51
LOWER INTERIOR ACCESSORIES
Dashboard
Unclip gear lever gaiter.
Remove the four mounting bolts.
Disconnect connectors.
57
Take out speaker grilles.
Remove fittings securing dashboard.
Pull dashboard gently.
Detach clips holding wiring harness.
Disconnect:
- connectors for headlight height adjustment
and hazard warning lights,
- remaining connectors (e.g. decoder).
Remove dashboard.
12964R
PRB5701
CONSOLE
57-5
