GENERAL
Safety
50A
AIR BAG AND PRETENSIONERS
96310-1S
IMPORTANT: All operations on the air bag and
pretensioner systems must be carried out by qua-
lified personnel who have been appropriately
trained.
The Air bag Workshop Repair Manual, section 88
MUST be consulted.
ATTENTION: When working under the vehicle do
not subject the underside of the floor to impacts
without removing the pretensioner fuse and wai-
ting 5 minutes for the reserve capacity to dis-
charge.
Refer to section 88 "Fuse allocation".
98718R1
Each time the steering wheel is removed, the stee-
ring wheel bolt MUST be renewed. Refer to sec-
tions 88 and 57A.
IMPORTANT : Whenever the steering wheel is re-
moved, the air bag connector (B) MUST be dis-
connected.
The air bag has a connector which short circuits
when it is disconnected to prevent incorrect trig-
gering.
HEAT SHIELDS
Heat shields must be refitted, whether they are
for bodywork or mechanical components.
TIGHTENING TORQUES
The recommended tightening torques MUST be
observed.
PRODUCTS
Read the precautions for use with care and ob-
serve the safety instructions by using the appro-
priate protection (gloves, mask, etc.).
50-1
