2013 MERCEDES-BENZ S-Class phone

Option 1
X
Select 0025or0026 in the character bar and
press 0021to confirm.
The input menu shows the data field
selected. 0002
Cursor in the nextd ata field
0003 To store an entry
0026 0025 and 0026icons to selec tadata field
Option 2
X Slide 002A001Cthe COMAND controller
repeatedly until the character bar
disappears.
X Select the data field by sliding 002A001C0006and
press 0021to confirm.
Storing an entry
X Select 0003in the character bar by turning
0031001C0032 the COMAND controller and press
0021 to confirm.
The entry is stored in the address book.
Further functions available in the
character bar
X To switch the character bar to upper/
lower-case characters: select002Dor
0003 and press 0021to confirm.
X To switch the character set: select
0001 and press 0021to confirm.
The character set switches between
upper/lower-case letters and digits. X
To change the language of the
character bar: select001Dand press 0021
to confirm.
X Select the language by turning 0031001C0032the
COMAND controller and press 0021to
confirm.
X To reposition the cursor within the data
field: select 0022or0023 and press 0021to
confirm. 0002
Cursor (repositioned)
0003 0022 and 0023icon to reposition the cursor
X Delete the character/entry (Y page 211). Basic functions of COMAND
Switching COMAND on/off X
Press the 0038function button on the
center console.
i If you switch off COMAND, playback of
the curren taudio or vide osource will also
be switched off. You cannot switch off
COMAND while making a call via COMAND.
You can also make phone calls using the
buttons on the multifunction steering
wheel when COMAND is switched off
(Y page 375). At
ag lance
137COMAND Z

Switching the sound on or off
Switching audio and video sources on/off
X
Press the 0029button on the multifunction
steering wheel.
The sound from the respective audio or
video source is switched on or off.
i When the sound is off, the system
displays the 002Fsymbol in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i Even if the sound is switched off, you will
still hear traffic and navigation system
announcements.
Switching off traffic and navigation
announcements completely
X Traffic announcements: press the0029
button until the 000Dmessage disappears
from the status bar of the display.
A confirmation tone sounds.
X Navigation announcements: during an
announcement, press the 0029button on
the multifunction steering wheel.
Switching traffic and navigation
announcements on again
X Traffic announcements: press and hold
down the 0029button until the 000Ddisplay
appears in the status bar.
A confirmation tone sounds.
X Navigation announcements: select the
0039 symbol in the navigation menu bar
and press 0021to confirm.
i The navigation announcements are
activated again if you switch COMAND off
and on again or start a new route guidance. Adjusting the volume Adjusting the volume for the audio or
video source
X
To adjust: turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
R traffic announcements
R navigation announcements
R phone calls
R the Voice Control System (see the separate
operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
X Turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel.
Adjusting the volume for phone calls
You can adjust the volume for hands-free
mode during a telephone call.
X Turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel. 138
At
ag lanceCOMAND

Rear Seat Entertainment System
Components Overview
The Rear Seat Entertainment System
comprises:
R
two screens for the rear behind the front-
sea thead restraints
R two remote controls
R a CD/DVD drive
R AUX jacks on both screens (display AUX)
and on the CD/DVD drive (drive AUX)
R two sets of cordless headphones At
ag lance
143COMAND Z

Rear-compartment screens
0002
Socket for corded headphones
0003 Vjack for video signal
0026 Ljack for audio signal, left
0025 Rjack for audio signal, right
0023 Rear compartment screen
You can connect an additional set of corded headphones to each rear-compartment screen.
The connection socke tis for headphones with 3.5 mm stereo jack plugs and an impedance
of 32 ohms.
Remote control Overview
0002
To switch the screen on/off
0003 To switch the button lighting on/off
0026 To select the screen for remote control
operation (COMAND, SPLITVIEW,L
REAR and REAR Rcan be selected) 0025
To select a menu or menu item
0023 To confirm a selection or setting
0024 To switch sound on/off (for corded
headphones)
0014 To adjust the volume (for corded
headphones)
0015 To skip; fast-forward/fast-rewind
0016 To select a track; direct entry
0017 To exit a menu (back)
Selecting the screen for the remote
control
You can use the remote control to operate
one of the two rear screens at a time. To do
so, you must switch the remote control to the
desired screen.
X To select the left-hand screen: turn
thumbwheel 0026until "L REAR" is
highlighted in the window.
X To select the right-hand screen: turn
thumbwheel 0026until "REAR R" is
highlighted in the window. 144
At
ag lanceCOMAND

Switching the screen on/off
If the SmartKey in the ignition lock is in
position
0or 1or if the SmartKey is not in the
ignition lock, the rear screens will switch off
after 30 minutes. Before the screens switch
off, they show a message to this effect.
You can switch the screens back on.
However, this will discharge the starter
battery.
X Point the remote control at the rear-
compartmen tscree nwhich has been
selected for remote operation.
X Press button 0002on the remote control.
The respective rear screen switches on or
off.
i You can only switch the screens on using
the remote control if the ignition is
switched on.
Switching the button lighting on/off
X Press button 0003on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
i If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically.
Switching the sound on/off (corded
headphones only)
X Press button 0024on the remote control.
The sound is switched on/off.
Selecting amenu/menu item and
confirming your selection
X Press the 0009000C000A buttons to
selec tthe menu/menu item and press the
000C button to confirm.
CD/DVD drive and AUX jacks The CD/DVD drive is located in the center
behind the front seats. 0002
CD/DVD slot
0003 AUX, right-hand (R) jack for audio signal
0026 AUX, left-hand (L) jack for audio signal
0025 AUX, jack for video signal (V)
0023 CD/DVD eject button
The AUX jacks shown are for the AUX drive.
Identical jacks can be found on the right-hand
side of the rear-compartment screens (AUX
display), (Y page 144). At
ag lance
145COMAND Z

Cordless headphones
Overview
The cordless headphones for the rear compartmen
tcan be recognized by the "DIGITA LAUDIO"
inscription on the battery compartment cover and by the fact that there is no SPLITVIEW
symbol (Y page 126)(Y page 126). 0002
Volume control
0003 To select a screen for the headphones
0026 Battery compartment cover
0025 To switch the cordless headphones on/off
0023 Indicator lamp with various displays (Y page 147)
X Gently pull both sides of the headphones out and adjust the fit of the headphones by pulling
the headband in the direction of the arrow.
Switching the cordless headphones on/
off
X Press button 0025.
Depending on the previous status, the
headphones are switched on or off. To save
the battery, the headphones are switched
off automatically if they do not receive a
signal within three minutes.
Adjusting the volume of the headphones
X Turn volume control 0002until you have
reached the desired volume.
i If you have connected corded
headphones to a rear-compartment
screen, you can adjust the volume by pressing buttons
0014on the remote control
(Y page 129).
Selecting ascreen for the headphones
X Move push slider 0003toL(left-hand screen)
or R(right-hand screen). 146
At
ag lanceCOMAND

Indicator lamp displays
The indicator lamp displays the following
possible stati for the batteries and
headphones: Display Status
Green The batteries are fine.
Red The batteries are almost
discharged. Continuou
sly lit
either
green or
red The headphones are switched
on and connected to
ascreen. Flashes
either
green or
red The headphones are
searching for the connection
to a screen.
No display
(dark) The headphones are switched
off or the batteries are
discharged. Connecting additional headphones
You can connect an additional set of corded
headphones to each rear-compartment
screen (Y page 144).
Changing batteries Batteries are required for the remote control
and for the two sets of cordless headphones.
Changing batteries (Y
page 251)System settings
Display settings
Switching the display on/off X
Select Vehicle by turning
0031001C0032the
COMAND controlle rand press 0021to
confirm.
X Select Display OFF by turning
0031001C0032the
COMAND controller and press 0021to
confirm. X
To switch on the display: press0021or
0031001C0032 turn the COMAND controller.
Display design Your COMAND display features optimized
designs for operatio
nduring daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X Select Vehicle by turning
0031001C0032the
COMAND controller and press 0021to
confirm.
X Select System by turning
0031001C0032the
COMAND controller and press 0021to
confirm.
X Select Display and press
0021to confirm.
X Select Day Mode ,
Night Mode or
Automatic by turning
0031001C0032the COMAND
controller and press 0021to confirm.
The 002Cicon indicates the current setting. Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic The display design
changes depending on
the brightness around
the vehicle.
i
In the Automatic setting, COMAND
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically. System settings
147COMAND Z

X
Select Yes or
No and press
0021to confirm.
If you select No , the process will be aborted.
If you select Yes , the individualization is
deleted. You will see a message to this
effect. Bluetooth
®
settings
General information about Bluetooth ®Bluetooth
®
technology is the standard for
short-range wireless data transmissio nofup
to approximately 10 meters. Bluetooth ®
allows, for example, the exchange of vCards.
Bluetooth ®
is a registered trademark of
Bluetooth Special Interes tGroup (SIG) Inc. Requirements for a Bluetooth
®
connection You can connect mobile phones and
notebooks to COMAND.
To do so, the following conditions need to be
met:
R Bluetooth ®
-capable devices, e.g. mobile
phones, must comply with a certain profile
in order to be connected to COMAND.
Every Bluetooth ®
device has its own
specific Bluetooth ®
name.
R Bluetooth ®
must be activated in COMAND
and on the respective Bluetooth ®
device;
see the separate operating instructions.
R the Bluetooth ®
device must be "visible" to
COMAND in order for COMAND to find and
display it. For the setting procedures,
please see the operating instructions for
the Bluetooth ®
device. i
Once a mobile phone has been
connected, receptio nand transmission
volume may change.
Activating/deactivating Bluetooth ® X
Select Vehicle in the main functio
nbar by
turning 0031001C0032the COMAND controller and
press 0021to confirm.
X Select System by turning
0031001C0032the
COMAND controller and press 0021to
confirm.
X Select Bluetooth by turning
0031001C0032the
COMAND controller and press 0021to
confirm.
X Select Bluetooth activated and press
0021 to confirm.
This switches Bluetooth ®
on 000A or off 0002.
Connecting Bluetooth ®
devices General information
Before using your Bluetooth
®
device with
COMAND for the first time, you will need to
connect it.
Connecting comprises:
R searching for a Bluetooth ®
device
R subsequently authorizing it
i Amaximum of 15 devices can be available
for selectio nfrom the device list.
More detailed information on suitable mobile
phones and on connecting Bluetooth ®
-
capable mobile phones to COMAND can be
found on the Internet at http://
www.mbusa-mobile.com. Or call the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes(1-800-367-6372)
(for the USA) or Customer Relations on
1-800-387-0100 (for Canada). System settings
151COMAND Z