2013 MERCEDES-BENZ R-CLASS FAMILY TOURER Owners Manual

198

Useful information
............................200
Important safety notes ....................200
Displays and operation ....................200
Menus and submenus ......................202
Display messages ............................. 214
Warning and indicator lamps in the
instrument cluster ............................238 199On-board computer and displays

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Read the information on qualified
specialist workshops: (Y page 24).Important safety notes
G
WARNING
The driver's concentration must always be
directed primarily at road traffic.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of only 30 mph
(approximately 50 km/h), the vehicle covers
a distance of 44 feet (approximately 14 m) per
second. G
WARNING
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as
R speed
R outside temperature
R warning/indicato rlamps
R malfunction/warning messages
R failure of any systems
Driving characteristics may be impaired. If you must continue to drive, do so with added
caution
.Contactana uthorized Mercedes-
Ben zCenter as soon as possible. G
WARNING
Malfunction and warning messages are only
displayed for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance services and safety checks
performed on the vehicle. Bring the vehicle to
an authorized Mercedes-Benz Center to
address the malfunction and warning
messages. G
WARNING
All categories of messages contain important
information which should be taken note of
and, where a malfunction is indicated,
addressed as soon as possible at an
authorized Mercedes-Benz Center.
Failure to repair the condition noted may
cause damage not covered by the Mercedes-
Benz Limited Warranty, or result in property
damage or personal injury.
For an illustration of the instrument cluster,
see (Y page 31). Displays and operation
Instrument lighting
The buttons for controlling the brightness are
at the top of the instrument cluster
(Y page 31).
Instrument cluster: if the light switch is set
to Ã, TorL, brightness control
takes ambient light into account. 200
Displays and operationOn-board computer and displays

i
The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
Displays and switches in the vehicle
interior: if the light switch is set to Ã,
brightness control takes ambient light into
account. If the light switch is set to Tor
L, brightness control does not take
ambient light into account. Tachometer
! Do not drive in the overrevving range, as
this could damage the engine.
The red band in the tachometer indicates the
engine's overrevving range.
The fuel supply is interrupted to protec tthe
engine when the red band is reached. Outside temperature display
G
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point do not guarantee that the road
surface is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
The outside temperature display is in the
multifunction display (Y page 203).
Changes in the outside temperature are
displayed after a short delay. Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
R DISTRONIC activated (Y page 175):
One or two segments in the set speed
range light up.
R DISTRONIC detects a vehicle in front: The segments between the speed of the
vehicle in front and the stored speed light
up. Operating the on-board computer
Overview :
Multifunction display
; Right control panel
= Left control panel
X To activate the on-board computer: turn
the SmartKey to position 1in the ignition
lock.
You can control the multifunction display and
the settings in the on-board computer using
the buttons on the multifunction steering
wheel.
Left control panel ~ R
Rejects or ends a call
R Exits phone book/redial
memory 6 R
Makes or accepts a call
R Switches to the redial memory Displays and operation
201On-board computer and displays Z

W
X R
Selects submenus in the
Settings menu
R Changes values
R Adjusts the volume ? R
Switches on the Voice Control
System; see the separate
operating instructions Right control panel
V
U R
Selects a menu :scrolls back and
forth &
*
Press briefly:
R
Scrolls back and forth within a
menu
R In the Audio menu: selects a
stored station, an audio track or
a video scene
R In the Telephone menu:
switches to the phone booka nd
selects a name or a telephone
number &
*
Press and hold:
R
In the Audio menu: selects the
previous/next statio norselects
an audio trac kusing rapid
scrolling
R In the Telephone menu: starts
rapid scrolling through the
phone book A R
Switches off the Voice Control
System; see the separate
operating instructions Multifunction display
:
Description field
; Transmission position (Y page 155)
= Drive program (Y page 157)
? Status bar with outside temperature or
speed (Y page 207)
Text field :shows the selected menu or
submenu as well as display messages. Menus and submenus
Menu overview
Press the VorU button on the
steering wheel to call up the menu bar and
select a menu.
Operating the on-board computer
(Y page 201).
Depending on the equipment installed in the
vehicle, you can call up the following menus:
R Standard display menu (Ypage 203)
R Audio menu (Y page 204)
R Navigation menu (Ypage 205)
R AIRMATIC/compass menu (Ypage 205)
R DISTRONIC menu (Ypage 180)
R Message memory menu (Ypage 214)
R Settings menu (Ypage 206)
R Additional functions menu
(Y page 211)
R Trip computer menu (Ypage 211)
R Telephone menu (Ypage 212) 202
Menus and submenusOn-board computer and displays

Standard display menu
Standard display Standard display
:
Trip odometer
; Odometer
X Press the VorU button on the
steering wheel to select the standard
display.
X To reset the trip odometer: press and
hold the .reset button in the instrument
cluster until the trip odometer is reset.
You can select the following functions in the
Standard display menu using the&or
* button:
R Tire pressure loss warning (Y page 319)
(Canada only)
R Tire pressure monitor (Y page 320) (USA
only)
R Coolant temperature (Y page 203)
R Digital speedometer or outside
temperature (Y page 203)
R ASSYST PLUS service interval display
(Y page 288)
R Engine oil level (Y page 285)
Displaying the coolant temperature G
WARNING
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated engine can cause
serious burns which can occur just by opening
the engine hood. Stay away from the engine
if you see or hear steam coming from it. Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of the
vehicle and do not stand near the vehicle until
the engine has cooled down.
! If the coolant temperature is over 248 ‡
(120 †), do not continue driving. The
engine will otherwise be damaged. X
Press the VorU button on the
steering wheel to select the standard
display.
X Press the &or* button to select the
coolant temperature.
Under normal driving conditions, with the
correcta nti-corrosiona nd antifreeze additive
concentration, the reading may rise to
248 ‡(120 †) .
Displaying the digital speedomete ror
outside temperature Digital speedometer
Outside temperature
If you have selected the digital speedometer
for the status bar (Y
page 207), the outside
temperature is displayed here. Menus and submenus
203On-board computer and displays Z

X
Press the VorU button on the
steering wheel to select the standard
display.
X Press the &or* button to select
digital speedometer or the outside
temperature.
i Vehicles for the United Kingdom: this
function is not available. Audio menu
Selecting aradio station :
Waveband
; Station frequency with memory position
i Station ;is displayed with the station
frequency or station name. The memory
position is only displayed along with
station ;if this has bee nstored.
X Switch on COMAND and select Radio; see
the separate operating instructions.
X Press the VorU button on the
steering wheel to select the Audiomenu.
X To select astore dstation: briefly press
the & or* button.
X To select a station from the station
list: press and briefly hold the &or
* button.
If no statio nlist is received:
X To select astation using the station
search: press and briefly hold the &or
* button.
i For informatio nonswitching waveband
and storing stations; see the separate
operating instructions. i
SIRIUS XM satellite radio functions like a
normal radio.
For more informatio nonsatellite radio
operation, see the separate operating
instructions.
Operating audio player or audio media Display CD/DV
Dchanger (example)
: Current CD in the CD/DVD changer
; Current title
Audio data from various audiod evices or
media can be played, depending on the
equipment installed in the vehicle.
X Switch on COMAND and activate audio
CD/DVD mode or MP3 mode; see the
separate operating instructions.
X Press the VorU button on the
steering wheel to select the Audiomenu.
X To select the next/previous track:
briefly press the &or* button.
X To select a track from the track list
(rapid scrolling): press and briefly hold the
& or* button.
The curren ttrack will not be displayed in
audio AUX mode ( Auxiliary audio mode:
external audio source connected). 204
Menus and submenusOn-board computer and displays

Video DVD operation
Display CD/DV
Dchanger (example)
: Current DVD in the CD/DVD changer
; Current scene
X Switch on COMAND and select video DVD;
see the separate operating instructions.
X Press the VorU button on the
steering wheel to select the Audiomenu.
X Press the &or* button to select a
scene. Navigation system menu
Displaying navigation instructions In the
Navigation menu: the instructions
from the navigation system appearint he
multifunction display.
For more information, see the separate
operating instructions.
X Switch on COMAND (see the separate
operating instructions).
X Press the =or; button on the
steering wheel to select the Navi menu.
Route guidance not active The direction of travel appears in the
multifunction display. If the name of the street is part of the
navigation system data, this will also be
displayed.
Route guidance active
Example: navigation instruction
The navigation instructions appearint
he
multifunction display. AIRMATIC/compass menu
Example display for vehicles with AIRMATIC
package and compass
X
Press VorU on the steering wheel
to select the AIRMATIC/compass menu.
In the AIRMATIC/compass menu you can
view the messages for level control
(Y page 183) and see the compass display
(Y page 280). The display in the AIRMATIC/
compass menu depends on the optional
equipment in your vehicle. Menus and submenus
205On-board computer and displays Z