2013 Lexus CT200h key

6228-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
If the electronic key does not operate properly
Use the mechanical key (P. 127)
in order to perform the following
operations:
Locks all the doors
Closes the windows
* (turn and
hold)
Unlocks all the doors
Opens the windows
* (turn and
hold)
*: These settings must be customized at any authorized Lexus dealer or repairer,
or another duly qualified and equipped professional.
If communication between the electronic key and vehicle is interrupted (P.
145) or the electronic key cannot be used because the battery is depleted, the
smart entry & start system and wireless remote control cannot be used. In
such cases, the doors can be opened and the hybrid system can be started by
following the procedure below.
Locking and unlocking the doors and key linked functions
1
2
3
4

6238-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
8
When trouble arises
Depress the brake pedal.
Touch the Lexus emblem side of
the electronic key to the power
switch.
If any of the doors is opened or
closed while the key is being
touched to the switch, an alarm will
sound to indicate that the start func-
tion cannot detect the electronic key.
Press the power switch within 10 seconds of the buzzer sounding,
keeping the brake pedal depressed.
In the event that the hybrid system still cannot be operated, contact any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional.
Stopping the hybrid system
Set the parking brake, shift the shift position to P and press the power switch as
you normally do when stopping the hybrid system.
Replacing the key battery
As the above procedure is a temporary measure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted. (P.
530)
Alarm (if equipped)
Using the mechanical key to lock the doors will not set the alarm system.
If a door is unlocked using the mechanical key when the alarm system is set, the
alarm may be triggered. (P. 9 3 )
Changing power switch modes
Within 10 seconds of the buzzer sounding, release the brake pedal and press the
power switch.
The hybrid system does not start and modes will be changed each time the switch
is pressed. (P. 198)
Starting the hybrid system
1
2
3

6268-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
Start the engine of the second vehicle. Increase the engine speed
slightly and maintain at that level for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.
Open and close any of the doors of your vehicle with the power switch
off.
Maintain the engine speed of the second vehicle and start the hybrid
system of your vehicle by turning the power switch to ON mode.
Make sure the “READY” indicator comes on. If the indicator light
does not come on, contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional.
Once the hybrid system has started, remove the jumper cables in the
exact reverse order from which they were connected.
Close the exclusive jump starting terminal cover, and reinstall the fuse
box cover to its original position.
Once the hybrid system starts, have the vehicle inspected at any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped
professional as soon as possible.
Starting the hybrid system when the 12-volt battery is discharged
The hybrid system cannot be started by push-starting.
To prevent 12-volt battery discharge
Turn off the headlights and the audio system while the hybrid system is off.
Turn off any unnecessary electrical components when the vehicle is running at
a low speed for an extended period, such as in heavy traffic.
When the 12-volt battery is removed or discharged
The hybrid system may not start. (P. 507)
If the 12-volt battery discharges while the shift position is in P, it may not be
possible to shift the shift position to other positions. In this case, the vehicle
cannot be towed without lifting both front wheels because the front wheels will
be locked. (P. 562)
When the 12-volt battery is reconnected, start the hybrid system and confirm
that the shift position can be changed to each position using the shift position
indicator.
Make sure that the key is not inside the vehicle when recharging or replacing
the 12-volt battery. The key may be locked in the vehicle if the alarm is acti-
vated. (P. 9 3 )
4
5
6
7
8
9

6529-2. Customization
CT200h_OM_OM76102E_(EE)
Vehicles with a navigation system or Lexus Display Audio: Settings
that can be changed using the Remote Touch or Lexus Display Audio
controller
Vehicles with a navigation system or Lexus Display Audio: Settings
that can be changed using the multi-information display
Vehicles without a navigation system or Lexus Display Audio: Settings
that can be changed using the multi-information display
Settings that can be changed by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional
Definition of symbols: O = Available, – =Not available
Door lock (P. 132, 622)
Customizable Features
1
2
3
4
FunctionDefault
settingCustomized
setting
Allows all doors to be
unlocked by turning the
mechanical key once in the
driver’s doorOff
(All doors
unlocked in
first step)On
(Driver’s door
unlocked in
first step, all
doors unlocked
in second step)
O––O
Speed linked door locking
functionOnOffO–OO
Shift position linked door
locking functionOffOnO–OO
Shift position linked door
unlocking functionOffOnO–OO
Driver’s door linked door
unlocking functionOnOffO–OO
1234

6559-2. Customization
CT200h_OM_OM76102E_(EE)
9
Vehicle specifications
Illumination (P. 461)
*: Interior or exterior illumination can be set separately
FunctionDefault
settingCustomized
setting
Time elapsed before the
interior lights turn off15 secondsOff
O–OO 7.5 seconds
30 seconds
Time elapsed before the
exterior lights turn off15 seconds
Off
O–OO7.5 seconds
30 seconds
Operation after the power
switch is turned offOnOff–––O
Operation when the doors
are unlocked with the
Smart entry & start system
or the wireless remote con-
trol function or the
mechanical key
*
OnOff–––O
Operation when you
approach the vehicle with
the electronic key on your
person
*
OnOff–––O
Footwell lighting On Off – – – O
Cup holder light On Off – – – O
Enable/disable operation of
the outer foot lights when
the doors are unlocked with
the power door lock switchOn Off – – – O
1234

6589-2. Customization
CT200h_OM_OM76102E_(EE)
Automatic air conditioning system (P. 442, 452)
Power windows (P. 178)
*: This function cannot be customized unless power window operation using the
wireless remote control is enabled
FunctionDefault
settingCustomized
setting
Switching between outside
air and recirculated air
mode linked to “AUTO”
switch operation
OnOffO––O
A/C Auto switch operationOnOffO–OO
Heating/cooling operation
minimized in Eco drive
modeOnOff–––O
1234
FunctionDefault
settingCustomized
setting
Mechanical key linked
operation (close)OffOn–––O
Mechanical key linked
operation (open)OffOn–––O
Wireless remote control
linked operation (close)OffOn–––O
Wireless remote control
linked operation (open)OffOn–––O
Buzzer sounds if operated
using wireless remote con-
trol
*
OnOff–––O
1234

6599-2. Customization
CT200h_OM_OM76102E_(EE)
9
Vehicle specifications
Lexus parking assist-sensor* (P. 245)
*: If equipped
Reverse buzzer (P. 206)
Outside rear view mirrors (P. 174)
Alarm* (P. 9 3 )
*: If equipped
FunctionDefault
settingCustomized
setting
Alert Volume
(Alert volume can be
adjusted)31 to 5O––O
Display
(Automatic display off the
LEXUS Park Assist
graphic can be enabled/dis-
abled)
OnOffO––O
Distance
(Distance mode can be
selected)LongShortO––O
1234
FunctionDefault
settingCustomized
setting
Signal (buzzer) when the
shift position is in RIntermittentSingle–––O
1234
FunctionDefault
settingCustomized
setting
Automatic folding/extend-
ing operationLinked to lock-
ing/unlocking
of the doorsOff
–––OLinked to
power switch
operation
1234
FunctionDefault
settingCustomized
setting
Deactivates the alarm when
the doors are unlocked
using the mechanical key
OffOn–––O
1234

664What to do if... (Troubleshooting)
CT200h_OM_OM76102E_(EE)
What to do if... (Troubleshooting)
If you lose your mechanical keys, new genuine mechanical keys can be
made by any authorized Lexus dealer or repairer, or another duly qual-
ified and equipped professional. (P. 128)
Vehicles with a smart entry & start system
If you lose your electronic keys, the risk of vehicle theft increases sig-
nificantly. Contact any authorized Lexus dealer or repairer, or another
duly qualified and equipped professional immediately. (P. 130)
Is the electronic key battery weak or depleted? (P. 530)
Vehicles with entry function
Is the power switch in ON mode?
When locking the doors, turn the power switch off. (P. 198)
Vehicles with entry function
Is the electronic key left inside the vehicle?
When locking the doors, make sure that you have the electronic key on
your person.
The function may not operate properly due to the condition of the radio
wave. (P. 145)
If you have a problem, check the following before contacting any autho-
rized Lexus dealer or repairer, or another duly qualified and equipped
professional.
The doors cannot be locked, unlocked, opened or closed
You lose your keys
The doors cannot be locked or unlocked