2013 AUDI A5 light

Downloaded from www.Manualslib.com manuals search engine To activate, pull the control stalk
toward you.At your desired speed, press the “SET” button
at the end of the stalk. The set speed and a
green cruise symbol are shown in the Driver
Information Display.Cruise Control

Set Cruising Speed Activate

Important Warnings and Safety Information, which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The CRUISE light will go off.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi off.Cancel/Resume
There are three ways to change your
speed:
1. Accelerate or decelerate, then press
“SET” again.
2. To increase/decrease speed in 1 mph
increments, tap the stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
Cruise Control

Downloaded from www.Manualslib.com manuals search engine Clock Settings: MMI®
1. Press the “MENU” function button.
2. Press the Time control button.
3. Using the control knob, scroll to Time source.
4. Make sure the Time source is set to GPS.To set time with GPS:
1. Rotate the knob to Manual and select.
2. Turn the knob until you reach Time; select to activate.
3. Turn the knob to the desired hour and press set.
4. The minute display is now highlighted; repeat the selection process.
5. Save the time by pressing the control knob.To manually adjust the time:
Note: Ensure time zone is accurate for your location.
Clock Setting:
Audi concert radio
1. Press the “SETUP” function button.
2. Press the Time/Date control button to enter the Time Setup menu.
3. Rotate the control knob to time, select to highlight the hour.
4. Turn the knob to the desired hour and press to set.
5. The minute display is now highlighted; repeat the selection process.
6. Save the time by pressing the control knob.
To adjust the time:
Vehicle should be stationary with the parking brake set before performing these operations.
Clock Setting

Downloaded from www.Manualslib.com manuals search engine Brake Noise Brakes S5® onlyThe majority of today’s vehicles use semi-metallic brake pads, which offer
excellent performance. Because of the metal-to-metal contact involving
semi-metallic pads, the sounds generated by the brake system under
normal operation can be greater than the sounds produced by vehicles
equipped with previous-generation brake pads. Depending on the local
environment, weather conditions and individual driving patterns, sounds
from the braking system may be more or less apparent.
Frequent, aggressive brake application increases the wear of brake
components and can reduce the potential for brake noise. Frequent, light
brake application allows glazing to develop on the brake surface, which
increases the potential for brake noise.Brake dust is a result of friction created by brake pads
and discs during braking. As brake pads and discs
make contact during braking, they wear down, which
causes dust particles to be expelled. This is a normal
characteristic of all brake systems and is not an indicator
of a defect.Brake Dust
Brakes
Important Warnings and Safety Information, which you must read, are listed on
the last panel under Brakes.