2013 Acura TSX navigation

86

Entering a Destination
Coordinate
Navigation
CoordinateHMENU button
 Dest. MENU 2
 Coordinate
Specify a location using latitude and longitude map coordinates.
1.Enter the latitude. Move
r to
select
OK
.
2.Enter the longitude. Move
r to
select
OK
.
3.Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press
u
.

If the address is not the desired location, scroll to another location and try again.
4.Press
u
again to display the route
calculation menu. 2Calculating the Route
P. 90
5.Rotate
i
to select
Set as Dest.

Press
u
.
1CoordinateLatitude and longitude mu
st be entered up to
the seconds’ value. A yellow box (shown at scales above 1/4 mile) denotes the area that can be viewed when you press
u on the current map.
Information icons are disp
layed at scales from 1
mile to 1/4 mile. Plac
e/landmark icons are
displayed at 1/8 mile or
less. Roads are displayed
at 1/4 mile or less. If you select multiple icons within the cursor radius, you are prompted
to select one of the
items from a list.
QRG

87

Entering a Destination
Intersection
IntersectionHMENU button
 Dest. MENU 2
 Intersection
Select the intersection of two streets as
the destination. The state or province for
your current location is displayed at the top of the screen (e.g., California).
1.Rotate
i
to select the
intersection search method. 2.Set the route to your destination. 2Calculating the Route
P. 90
The following options are available: •Street
: Selects the two intersecting streets. Th
e city or cities that the streets are
located in are displayed. 2Selecting a Street
P. 73
•City
: Selects the city where the
intersection is located. You are prompted to enter
the name of the two intersecting streets. 2Selecting a City
P. 72
•Change State
: Selects the state or province.
2Selecting the State or Province
P. 71
1IntersectionIt is usually easier to select
Street
to find the
streets first. The city or cities that the streets are in will be displaye
d. If you select
City
and your
city is not listed, it ma
y be part of a larger
metropolitan area. Try entering the street first. If the intersection is outside the state you are currently in, Rotate
i
to select
Change State
.
2Selecting the State or Province
P. 71
If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.
QRG
Navigation
Press
u
.

88

Entering a Destination
Map Input
Navigation
Map InputHMENU button
 Dest. MENU 2
 Map Input
Use the Interface Dial to manually select an
icon or a location on the map screen as
the destination. You are prompted to define the map area to display.
1.Rotate
i
to select an item.
The following item
s are available:
•Current Position
: Your current position is centered on the map.
•City
: You are prompted to select the city.
2Selecting a City
P. 72
•State
: You are prompted to select the state.
2Selecting the State or Province
P. 71
•USA and Canada
: Your current position is displayed on a map of the country.
QRG
Press
u
.

89

Entering a Destination
Map Input
2.Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press
u
.

If the address is not the desired location, scroll the map to another location and try again.
3.Press
u
again to display the route
calculation menu. 2Calculating the Route
P. 90
4.Rotate
i
to select
Set as Dest.

Press
u
.
1Map InputA yellow box (shown at scales above 1/4 mile) denotes the area that can be viewed when you press
u on the current map.
Information icons are disp
layed at scales from 1
mile to 1/4 mile. Plac
e/landmark icons are
displayed at 1/8 mile or
less. Roads are displayed
at 1/4 mile or less. If you select multiple icons within the cursor radius, you are prompted
to select one of the
items from a list. 2Selecting a Destination on the Map
P. 129
QRG
Navigation

90Navigation
Calculating the RouteThis section describes how to calculate your route.
1.Rotate
i
to select
OK
. Press
u
.

The system calculates and displays the route line on the map screen. 2Route Line
P. 94
The following options are available: •Route Pref.
: Changes the route preferences (calculating method).
2Changing the Route Preference
P. 91
•View Routes
: Displays three different routes.
2Viewing the Routes
P. 92
•DESTINATION MAP
: Move
r to select
DESTINATION MAP
to display a map of
the destination. 2Viewing the Routes
P. 92
2.Follow the route guidance to your destination. 2Driving to Your Destination
P. 93

The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, areas with traffic restrictions, or weather warning areas.
1Calculating the RouteThe current route prefer
ences are displayed as
icons on the top right of the Calculate Route screen. The straight line distance (as the crow flies, not driving distan
ce) and direction to the
destination are shown t
ogether with weather
information. You must have an AcuraLink Real-Time Weather™ subscripti
on to receive weather
information. 2AcuraLink Real-Time Weather™
P. 15
2Subscribing to XM® Radio
P. 144
You cannot use voice commands while the system is calculating the route. Add to Address Book You can add the destination address to the address book. 2Adding an Address Book Entry
P. 37
Add to Dest. List You can add the address to
the Destination List.
2Editing the Destination List
P. 127
CallYou can place a telephone ca
ll to the destination
phone number. 2Bluetooth® HandsFreeLink®
P. 174
QRG

91

Calculating the Route
Changing the Route Preference
Changing the Route PreferenceChange the route preference by select
ing minimum or maximum driving methods.
1.Rotate
i
to select an item.
2.Rotate
i
to select
MIN
or
MAX
.
Press
u
.

Repeat step 1 and 2 as necessary.
3.More
r to select
OK
.
1Changing the Route PreferenceThe calculated route ma
y not be the route you
would choose. For safety reasons, the system generally applies the fo
llowing rules to your
route:•Shortcuts through resi
dential areas are
avoided.•Right turns are favored over left turns or U-turns.•Time-restricted turns
(turns prohibited at
certain times of the
day) are not used.
If you select
MIN
or
MAX
of
ETC Roads
as your
route preference, the system finds the route with as few electronic toll collection (ETC) gates as possible in MIN or as many
ETC gates as possible
in MAX.
QRG
Navigation
Press
u
.

92

Calculating the Route
Viewing the Routes
Navigation
Viewing the RoutesView three different routes to your destination.
Rotate
i
to select a route. Press
u
.
The travel distance and estimated travel time is displayed for
each
route.The system calculates and displays the route line on the map screen. 2Route Line
P. 94
Calculating the Route on the Destination MapCalculate the route from the map of the destination address.
Rotate
i
to select
Calculate the
Route
. Press
u
.
The system calculates and display the route line on the map screen. 2Route Line
P. 94
1Viewing the RoutesIt is not unusual for so
me calculated route
options to be identical. 1Calculating the Route on the Destination Mapd
“Display Destination Map”
(when en route)
QRG

93
Driving to Your DestinationThis section describes how to follow the rout
e guidance to your destination, receive
traffic and weather information, and choose the icons displayed on the map screen.Viewing the Route
After calculating the route to your destination, the route is displayed on the map screen. 2Map Screen Legend
P. 10
As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.
■Map Screen
1Viewing the Routed
“Display Map”
You can change the map scale using voice control commands (e.g., say
d
“Display 2 mile
scale”
).
2Map Scale Commands
P. 237
You can also change the map scale by rotating i
.
You can control the icons displayed on the map screen using voice control commands (e.g., say d
“Display post office”
).
2Map Display Commands
P. 236
You can obtain information about the route using voice control
commands (e.g., say
d

“How long to the destination?”
).
2Route Commands
P. 238
You can display the next guidance point on the map screen by saying
d
“Display Map Guide”

(when en route). If you scroll the map while en route, the time and distance to destination
indicators are replaced
with an indicator showing distance from the current vehicle position. The map screen can be view
ed in single-screen or
split-screen mode. 2Guidance Mode
P. 103
QRG
Navigation