2013 Acura TSX navigation

24System Setup
Interface SettingsDisplay and Volume SettingsHINFO/PHONE button
 Setup
Use the Main Setup screen to ad
just the display and volume.
1.Rotate
i
to select an item.
2.Rotate
i
to make the
adjustment. Press
u
.
The following item
s are available:
•Brightness:
Adjusts the screen’s brightness.
•Contrast:
Adjusts the screen’s contrast.
•Black Level:
Adjusts the screen’s black level.
•Volume:
Adjusts the navigation system volume level.
1Display and Volume SettingsYou can set separate
daytime and nighttime
settings for
Brightness
, Contrast
, and
Black
Level
. Adjust each setting when the display is in
either daytime or
nighttime mode.
You can set the display and volume settings using voice commands on the Setup screen. 2Main Setup Screen Commands
P. 242
Volume If you set
Volume
to
OFF
, you will not hear
route guidance or voic
e command confirmations.
If you then select
Voice
in the Map Menu, you
will hear route guidance
at the default volume.
QRG
Press
u
.

26

Interface Settings
Basic Settings
Basic SettingsHINFO/PHONE button
 Setup
 Other
 Basic Settings
Set the map units to either miles or kilome
ters (km), and control the voice feedback
from the navigation system.
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•Units
: Sets the map units to eith
er miles (factory default) or kilometers (km).
•Voice Recognition Tutor
: Turns the voice feedback feature on or off.
ON
(factory default): Provides voice control system confirmation or prompts.
OFF
: Disables the feature.
•Verbal Reminder
: Turns the verbal reminders on or off.
ON
(factory default): Provides
warning voice messages when:
– Driving with the parking brake on – Driving without wearing the driv
er and/or passenger seat belt
OFF
: Disables the feature.
QRG
System Setup

27

Interface Settings
Color
ColorHINFO/PHONE button
 Setup
 Other
 Color
Choose the color of the navigation map and system menus.
Rotate
i
to select an item. Press
u
.
The following items are available: •Map Color
: Sets the color of the map screen.
2Map Color
P. 28
•Menu Color
: Sets the color of the menu screens.
2Menu Color
P. 28
QRG
System Setup

36System Setup
Personal InformationHINFO/PHONE button
 Setup
 Personal Information
Use the personal information menu to sele
ct and set your address books, home
addresses, and PIN numbers. You can also de
lete unwanted destinations from the list
of previously routed destinations.
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•Address Book
: Stores new addresses or edits your address book.
2Address Book
P. 37
•Home Address 1
: Sets or edits your home address.
2Home Addresses
P. 41
•Home Address 2
: Sets or edits another home address.
2Home Addresses
P. 41
•PIN Number
: Sets or changes your PIN number.
2PIN Numbers
P. 42
•Previous Destinations
: Deletes the destination history.
2Previous Destinations
P. 43
1Personal InformationPersonal information cannot be backed up or moved to another navigation system.
QRG

42

Personal Information
PIN Numbers
System Setup
PIN NumbersHINFO/PHONE button
 Setup
 Personal Information
 PIN Number
Set a four-digit PIN for protecting pers
onal addresses and your home addresses.
Once you set a PIN, you are prompted to
enter it whenever you access a personal
address or a home address.
1.Rotate
i
to select the PIN to
create. Press
u
.
2.Rotate
i
to select a digit to
enter. Press
u
. Repeat to enter a
new 4-digit PIN.3.Re-enter the new PIN, when prompted, to confirm the number you just entered.
If you have not entered the same number both times, an “INCORRECT PIN” message is displayed. Enter your PIN again.
1PIN NumbersPIN Personal Identification Number (PIN) is a password used to access personal data. PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, your
dealer will have to reset
the navigation system a
nd all of your stored
information will be erased
. The factory default is
no PIN. Go Home PIN Go Home PINs are shared with Driver 1 and Driver 2. If either Driver
1 or Driver 2 sets a Go
Home PIN, both of them need to enter the PIN when:•selecting
Go Home
for a destination
•selecting
Home Address
for editing
If you want to stop using a PIN, move
r to select
DO NOT USE PIN
.
QRG

43

Personal Information
Previous Destinations
Previous DestinationsHINFO/PHONE button
 Setup
 Personal Information
 Previous
DestinationsThe navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination
in the future. You can delete some or all
of your previous destinations from the list.
1.Rotate
i
to select the destination
to delete. Press
u
.

Repeat the procedure as necessary.

Items to be deleted are indicated with a trash icon.
2.Move
r to select
OK
to delete the
selected destinations.
1Previous DestinationsThe list of previous dest
inations is shared with
Driver 1 and Driver 2. Fo
r example, if Driver 1
deletes some previous
destinations, they are
deleted for Driver 2 as well. To cancel the selection of
a previous destination,
rotate
i
to highlight the destination again.
Press
u to de-select it.
Trash icon
QRG
System Setup

48System Setup
Routing & GuidanceHINFO/PHONE button
 Setup
 Other
 Routing & Guidance
Choose various settings that determine th
e navigation system functionality during
route guidance.
Rotate
i
to select an item. Press
u
.
The following item
s are available:
•Rerouting
: Sets the route recalculation to automatic or manual mode.
2Rerouting
P. 49
•Unverified Area Routing
: Sets whether you use the ro
ute guidance in unverified
areas.2Unverified Area Routing
P. 50
•Traffic Rerouting
: Sets whether you use automatic recalculation based on traffic
information.2Traffic Rerouting
P. 52
•Edit Avoid Area
: Specifies areas to avoid
when calculating a route.
2Edit Avoid Area
P. 53
•Edit Waypoint Search Area
: Sets the distance from the route to find waypoints.
2Edit Waypoint Search Area
P. 55
•Guidance Mode
: Sets whether to display only the map screen or a split map-
guidance screen.2Guidance Mode
P. 103
QRG

50

Routing & Guidance
Unverified Area Routing
System Setup
Unverified Area RoutingHINFO/PHONE button
 Setup
 Other
 Routing & Guidance
 Unverified
Area RoutingReceive turn-by-turn map and voic
e guidance in unverified areas.
Rotate
i
to select
ON
or
OFF
.
1Unverified Area RoutingUnverified roads are found in rural areas, and typically include
residential streets away from the
center of a town. They may not be accurate, and can contain errors in
location, naming, and
address range. Unverified roads are s
hown only when viewing
the map in the 1/20, 1/8 and 1/4 mile map scales.
Vector line (dotted)
Blue-pink route line
Differences OFF (factory default)
ON
ON or OFF?
The driver wishes to manually navigate using the navigation map and choose the streets that lead to the destination.
The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.
Route calculation
Route is usually longer, using verified roads whenever possible.
Route is shorter, but uses unverified (purple) streets that may not be accurate.
Route line
A blue dotted vector line is displayed on the map that continually points to your destination.
A blue-pink dashed route line highlights suggested unverified streets on the map while traveling to your destination.
Cautionary messages
Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions.
Cautionary pop-up screens and voice announcements remind you to exercise additional caution and obey all traffic restrictions.
QRG
Press
u
.