2013 Acura TSX Navigation Manual

120

Map Menu
Traffic Rerouting™
Navigation
2.Press
u
to select
TRAFFIC
DETAIL
.
3.Rotate
i
to select
Avoid
.

Repeat step 1 to 3 as necessary.
4.Move
r to select
REROUTE
.

The system recalculates a detour route that avoids the traffic incidents.
1Traffic Rerouting™ ManuallyYou can choose to avoid up to 10 traffic incidents. It is not alwa
ys possible for the system
to calculate a route that avoids all traffic incidents or specific traf
fic incidents you select.
The “On Route” tab on the Traffic List screen is only available duri
ng route guidance.
You cannot select an inci
dent to avoid from the
“All” tab. You can also detour ar
ound a traffic incident
manually if you encounter an unexpected obstacle or do not have
an AcuraLink Real-Time
Traffic™ subscription. 2Taking a Detour
P. 122
QRG
Press
u
.

121
Changing Your RouteHMENU button (when en route)This section describes how to alter your r
oute, add an interim “waypoint” (pit stop),
choose a different destination, cancel your
current destination, and continue your
trip after stopping.
Rotate
i
to select an item. Press
u
.
The following items are available: •Cancel Route
: Cancels the route guidance.
2Canceling the Route
P. 122
•Detour
: Calculates a detour route.
2Taking a Detour
P. 122
•Avoid Streets
: Avoids streets along your route.
2Avoiding Streets
P. 122
•Change Route Preference
: Changes the route preferences (calculating method).
2Changing the Route Preference
P. 91
•Waypoint
: Sets waypoints along your route.
2Adding Waypoints from the Route Menu
P. 124
•Destination List
: Shows a list of waypoints. You
can delete waypoints or edit the
order of them. 2Editing the Destination List
P. 127
1Changing Your Routed
“Display Menu”
, d
“Display Navigation”

(when en route) If you press the MENU button when not en route, the Destination Me
nu screen is displayed.
2Entering a Destination
P. 68
QRG
Navigation

122

Changing Your Route
Canceling the Route
Navigation
Canceling the RouteHMENU button (when en route)
 Cancel Route
Cancel the route guidance and remove th
e destination and all waypoints from the
destination list. The system th
en returns to the map screen.
Taking a DetourHMENU button (when en route)
 Detour
Calculate a detour route manu
ally. The system attempts to calculate a new route by
avoiding the next 5 miles (while on a freeway
) or 1 mile (while on a surface street).
Avoiding StreetsHMENU button (when en route)
 Avoid Streets
Select a street or streets
along your route to avoid.
1.Rotate
i
to select the street you
want to avoid. Press
u
.

Repeat the procedure to avoid other streets.

Streets to be avoided are indicated with a trash icon.
1Canceling the RouteYou can also cancel your route from the Map Menu. 2Map Menu
P. 98
1Taking a DetourThe detour option is conv
enient if you encounter
an unexpected obstacle such as a road closure or extremely heavy tr
affic congestion.
1Avoiding StreetsAvoiding certain streets
is convenient if you
know of road construction, road closures, or excessive traffic
along the route.
You cannot choose specific streets you want to use, only those to avoid.
However, you can select
intersections or waypoi
nts (places/landmarks)
that the system will use in your route.2Adding Waypoints
P. 123
You can store up to 10 streets to avoid. You cannot avoid your current st
reet or the streets of
your waypoint(s) or dest
ination (system beeps if
selected).
QRG

123

Changing Your Route
Adding Waypoints
2.Move
r to select
OK
.

The system calculates a
Adding WaypointsAdd up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map screen as small, numbered red flags. The route follows
the waypoints in
the order they are listed in the Destination List.
1Adding WaypointsWaypoints allow you to stop for gas or food, for example, and then continue on to your destination. Press the MAP/GUIDE button to return to the map screen without adding a waypoint at any time. The search corridor used
for adding waypoints
can be adjusted. 2Edit Waypoint Search Area
P. 55
You can delete waypoints
or edit the order of
waypoints in the destination list. 2Editing the Destination List
P. 127
QRG
Navigation
new route.

124

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Waypoint
1.Rotate
i
to select a search
method and location to add a waypoint. Press
u
.
The following options are available: •SEARCH AROUND:
Searches in a spiral pattern around the location you select.
•SEARCH ALONG
: Searches within a “corridor” on either side of the locations
you select.
2.Rotate
i
to select a waypoint
category (e.g.,
GAS STATION
).
Press
u
.
■Adding Waypoints from the Route Menu
1Adding WaypointsSearch method
“Search around” method“Search along” method
QRG

125

Changing Your Route
Adding Waypoints
3.Rotate
i
to select a place.

The waypoint is added to the Destination List.
4.Move
r to select
OK
.

The route is automatically recalculated and displayed on the map screen.
QRG
Navigation
Press
u
.

126

Changing Your Route
Adding Waypoints
Navigation
1.Rotate
i
to select
ADD TO Dest.
List
. Press
u
.
2.Rotate
i
to select a location in
the Destination List. Press
u
.
3.Move
r to select
OK
.

The route is automatically recalculated and displayed on the map screen.
■Adding Waypoints from the Calculate Route Screen
QRG

127

Changing Your Route
Editing the Destination List
Editing the Destination ListHMENU button (when en route)
 Destination List
Delete or edit the order of waypoints.
1.Move
y
to select
Edit
.

Move
w
to select
Map
to
display the destination and waypoints on the map screen.
2.Rotate
i
to select an item.
3.Move
r to select
OK
.

The route is automatically recalculated and displayed on the map screen.
The following options are available: •Delete
: Rotate
i
to select a list item to delete. Press
u
.
•Edit Order
: Rotate
i
to select a list item to move, press
u
, rotate
i
to select
a new location, and press
u
again.
QRG
Navigation
Press
u
.