2012 TOYOTA HILUX Owners Manual (in English)

385 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
When using the hands-free system
The audio system is muted when making a call.
If both parties speak at the same time, it may be difficult to hear.
If the received call volume is overly loud, an echo may be heard.
If the Bluetooth
® phone is too close to the system, quality of the sound
may deteriorate and connecting condition may go down.
In the following circumstances, it may be difficult to hear the other party:
• When driving on unpaved roads
• When driving at high speeds
• If a window is open
• If the air conditioning is blowing directly on the microphone
• There is an effect from the network of the cellular phone
Conditions under which the system will not operate
If using a cellular phone that does not support Bluetooth
®
If the cellular phone is turned off
If you are outside service range
If the cellular phone is not connected
If the cellular phone’s battery is low
When outgoing is controlled, due to heavy traffic on telephone lines, etc.
When the cellular phone itself cannot be used
When transferring the phonebook data from the cellular phone

386 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Bluetooth® antenna
The antenna is built into the display. If the cellular phone is behind the seat
or in the console box, or touching or covered by metal objects, connection
status may deteriorate.
Battery charge/Signal status
This display may not correspond exactly with the cellular phone itself.
This system does not have a charging function.
The Bluetooth
® phone battery will burn quickly when it is connected to
Bluetooth®.
When using Bluetooth
® audio and hands-free system at the same time
The following problems may occur.
The Bluetooth
® connection may be cut.
Noise may be heard on the Bluetooth
® audio playback.
About the phonebook in this system
The following data is stored for every registered phone. When another
phone is connecting, you cannot read the registered data.
Phonebook data
All of call history
Speed dial
When you delete the phone, the above-mentioned data is also deleted.
When you release your car
Be sure to initialize your data. (P. 317)

387 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
About Bluetooth®
Compatible models
This system supports the following service.
Bluetooth
® Specification:
Ver. 1.1 or higher (Recommended: Ver. 2.1+EDR or higher)
Profiles:
• HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.5 or
higher)
This is a profile to allow hands-free phone calls using the cellular phone
or head sets. It has an outgoing and incoming call function.
• OPP (Object Push Profile) Ver. 1.1 or higher
This is a profile to exchange phonebook data. When the Bluetooth
®
phone has PBAP and OPP, OPP cannot be used.
• PBAP (Phone Book Access Profile) Ver. 1.0 or higher
This is a profile to transfer phonebook data.
If your cellular phone does not support HFP, you cannot enter the Bluetooth
®
phone. You need to take OPP or PBAP service individually.
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
The Bluetooth wordmark and logo are
owned by Bluetooth SIG. and permission
has been granted to use the trademark of
the licensee Panasonic Corporation.
Other trademarks and trade names are
owned by various different owners.

388 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Certification
The latest “DECLARATION of CONFORMITY” (DoC) is available at the
address stated in the DoC.

389 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
CAUTION
While driving
Do not use the cellular phone or connect the Bluetooth
® system.
NOTICE
When leaving the vehicle
Do not leave your cellular phone in the vehicle. The inside of the vehicle may
become hot, causing damage to the phone.

390
3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Using the Bluetooth® phone
Device name
Bluetooth
® connection status
Make a call
To display the screen shown above, press on the steering
wheel or .

391 3-3. Using the “touch screen”
3
Interior features
HILUX_EE (OM0K132E)
Registering a Bluetooth® phone
To use the hands-free system, you must register a Bluetooth
® phone
in the system. You can register up to 5 phones in the system.
Display the “Telephone” screen. (P. 390)
Touch “Yes”.
Input the passcode displayed on
the screen into your phone.
For the operation of the phone,
see the manual that comes with
your cellular phone.
Passcodes are not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
® devices.
Depending on the phone, you
may need to select “Yes” to regis-
ter, or “No” to cancel on your cel-
lular phone.
If you want to cancel it, select
“Cancel”.
If a completion message is dis-
played, registration is complete.
If an error message is displayed,
follow the guidance on the screen
to try again.
STEP1
STEP2
STEP3

392 3-3. Using the “touch screen”
HILUX_EE (OM0K132E)
Selecting the Bluetooth® phone
If multiple Bluetooth
® devices are registered, follow the procedure
below to select the Bluetooth® device to be used. You may only use
one device at a time.
Display the “Telephone” screen. (P. 390)
Touch “Connect telephone”.
Touch the device to connect.
“Add new”: Registering a
Bluetooth® device. (P. 424)
The selection indicator is
displayed on left side of the
selected device name.
The Bluetooth
® mark is displayed
when you connected the device.
STEP1
STEP2
STEP3