2012 TOYOTA HILUX Owners Manual (in English)

273 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Fast-forwarding and reversing tracks
To fast-forward or reverse, press and hold “” or “” on the “SEEK/
TRACK” button until you hear a beep.
Scanning tracks
Press the “SCAN” button.
The first ten seconds of each track will be played.
To cancel, press the “SCAN” button again.
Press the button again when the desired track is reached.
STEP1
STEP2

274 3-2. Using the audio system
HILUX_EE (OM0K132E)
Random playback
Current CD
Press the 2 (RDM) button.
Songs are played in random order.
To cancel, press the 2 (RDM) button again.
Repeat play
Repeating a track
Press the 1 (RPT) button.
To cancel, press the 1 (RPT) button again.

275 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Switching the display
Press the “TEXT” button.
Each time the button is pressed, the display changes in the following
order: Track no./Elapsed time  CD title  Track title  Artist name
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
Display
Up to 12 characters can be displayed at a time.
If there are 13 or more characters, pressing and holding the “TEXT” button
for 1 second or more enables to display the remaining characters.
A maximum of 24 characters can be displayed.
If the “TEXT” button is pressed for more than 1 second again or has not
been operated for more than 6 seconds, the display will return to the first 12
characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.

276 3-2. Using the audio system
HILUX_EE (OM0K132E)
Error messages
“ERROR”: This indicates a problem either in the CD or inside the player.
“CD CHECK”: The CD may be dirty, damaged or inserted up-side down.
“WAIT”: Operation has stopped due to a high temperature inside the
player. Wait for a while and then press the “CD” button. Con-
tact your Toyota dealer if the CD still cannot be played.
Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not be used.
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
If discs are left inside the CD player or in the ejected position for
extended periods of time
The discs may be damaged and may not play properly.

277 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs, 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)
Low-quality and deformed CDs
CDs with a transparent or translucent
recording area
CDs that have tape, stickers or CD-R
labels attached to them, or that have
had the label peeled off

278 3-2. Using the audio system
HILUX_EE (OM0K132E)
NOTICE
CD player precautions
Failure to follow the precautions below may result in serious damage to the
CDs or the player itself.
Do not insert anything other than CDs into the CD slot.
Do not apply oil to the CD player.
Store CDs away from direct sunlight.
Never try to disassemble any part of the CD player.
Do not insert more than one CD at a
time.

279
3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Playing MP3 and WMA discs
Vo lu m e Power
Selecting a file,
fast-forwarding
or reversing
Searching playback
Playback
Disc eject
Repeat play
Random playback
Selecting a file
or displaying
folder lists
Back button
Displaying text message
Selecting a
folder

280 3-2. Using the audio system
HILUX_EE (OM0K132E)
Loading and ejecting MP3 and WMA discs
P. 272
Selecting and scanning a folder
Selecting a folder one at a time
Press “” or “” on the “FOLDER” button, or the 3 ( ) or 4
( ) button to select the desired folder.
Selecting a folder and file from folder lists
Press the “TUNE•SCROLL” knob.
The folder list will be displayed.
Turn and press the “TUNE•SCROLL” knob to select a folder
and a file.
To return to the previous display, press the 6 ( ) button.
STEP1
STEP2