2012 MERCEDES-BENZ CLS SHOOTING BRAKE key battery

[x] Cancel search: key battery

Page 8 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Ashtray
.............................................. .306
Assistance menu (on-board com-
puter) ................................................. .236
ASSYST PLUS Displaying a service message ......

Page 15 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual H
Handbrake see Parking brake
Hazard warning lamps ......................118
Headbag Display message ............................ 255
Headlamp
Cleaning system (function) ............118
Cleaning syste

Page 81 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Changing the settings of the locking
system
You can change the settings of the locking
system. This means that only the driver's door
and the fuel fille rflap are unlocked when the
vehicle is unlo

Page 82 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual X
Push release catch :in the direction of
the arrow and at the same time, remove
emergency key element ;from the key. Battery of the key
Important safety notes G
WARNING
Batteries are toxic and contai

Page 83 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual X
Press emergency key element ;into the
opening in the key in the direction of the
arrow until battery compartment cover :
opens. When doing so, do not hold battery
compartment cover :shut.
X Remove b

Page 84 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Problems with the key
Problem Possible causes/consequences and
M Solutions
You cannot lock or
unlock the vehicle
using the key. The key battery is discharged or nearly discharged.
X
Try again to lock/

Page 85 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual Problem Possible causes/consequences and
M Solutions
The engine cannot be
started using the key. the on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating or interior
li

Page 108 of 405

MERCEDES-BENZ CLS SHOOTING BRAKE 2012  Owners Manual X
Make sure that the key is in position 1or
2 in the ignition lock.
X To switch on: press button:repeatedly
until the desired heating level is set.
X To switch off: press button:repeatedly
until all t
Page:   1-8 9-16 17-24 next >