2012 Lexus HS250h Navigation Manual

SETUP
328
D
Auto avoid traffic
The guidance route automatically
changes to another route to avoid heavy
congestion.
To turn the “Auto Avoid Traffic” on:
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10040LC
4. Select “On” of the “Auto Avoid Traf-
fic”.
5. Select “Save”.
U6041FCa
When congestion information about the
guidance route has been received, a
screen will appear to ask you whether to
reroute to avoid the congestion.
If you wish to reroute, select “Yes”. Anoth-
er route to allow you to avoid the conges-
tion will appear.
If you do not wish to reroute, select “No”.
INFORMATION
When the “Traffic Information” indi-
cator is dimmed, “Auto Avoid Traf-
fic”, “Traffic Voice Guidance” and
“Show Free Flowing Traffic” will not
operate.
11 08.03HS250h_NAVI_U
75051U

SETUP
329
D
Show free flowing traffic
Freely flowing traffic is shown with the ar-
row.
To turn the “Show Free Flowing Traffic” on:
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10042LC
4. Select “On” of the “Show Free Flow-
ing Traffic”.
5. Select “Save”.
INFORMATION
When the “Traffic Information” indi-
cator is dimmed, “Auto Avoid Traf-
fic”, “Traffic Voice Guidance” and
“Show Free Flowing Traffic” will not
operate.
DPOI category change
(Select POI icons)
Select from among the 6 icons displayed
on the “Customize POI Icons” screen, so
that setting of the icons to be displayed on
the map screen can be done easily.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10043LC
4. Select “Customize POI Icons”.
U10044LC
5. Select the category button to be
changed.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
330
U10045LC
6. Select the desired group.
If the desired POI category is not on the
screen, select“List All Categories” to list
all POI categories.
U10046LC
7. Select the desired category.
8. Select “OK”.
DScreen layout function (“ AAOff”
function)
Each screen buttons and current street
name on the map screen can be displayed
or hidden.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10047LC
4. Select “ AAOff” Function”.
U10048LC
5. Select the button to be turned off.
The button becomes dimmed.
To set the default, select “Default”.
6. Select “Save”.
11 08.03HS250h_NAVI_U
75051U

SETUP
331
D
Current position/tire change cal-
ibration
The current vehicle position mark can be
adjusted manually. Miscalculation of the
distance caused by tire replacement can
also be adjusted.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10049LC
4. Select “Calibration”.
U10050LC
5. Select the desired button.
INFORMATION
For additional information on the ac-
curacy of a current vehicle position,
see “Limitations of the navigation
system” on page 392.
POSITION/DIRECTION CALIBRATION
When driving, the current vehicle position
mark will be automatically corrected by
GPS signals. If GPS reception is poor due
to location, you can manually adjust the
current vehicle position mark.
U10051LC
1. Select “Position / Direction”.
U10052LC
2. Select the 8 directional button to
move the cursorto the desired point
on the map.
3. Select “OK”.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
332
U10053LC
4. Select either theorto ad-
just the direction of the current vehicle
position mark.
5. Select “OK”.
The map will be displayed. TIRE CHANGE CALIBRATION
The tire change calibration function will be
used when replacing the tires. This func-
tion will adjust the miscalculation caused
by the circumference difference between
the old and new tires. If this procedure is
not performed when the tires are replaced,
the current vehicle position mark may be
incorrectly displayed.
U10054LC
To perform a distance calibration pro-
cedure, select “Tire Change” on the
“Calibration” screen.
The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map will be dis-
played.
11 08.03HS250h_NAVI_U
75051U

SETUP
333
D
Pop−
up information
When the “Pop −up information” is turned
on, the pop −up information will be dis-
played.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10055LC
4. Select “Pop− up Information”.
U10056LC
5. Select “On” or “Off”.
6. Select “Save”. When the “Pop
−up Information” is turned
off, the following messages will not be dis-
played.
U10057LC
This message appears when the system is
in the POI mode and the map scale is over
0.5 miles (1 km).
U10058LC
The message appears when the map is
switched to the dual map screen mode.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
334
“Telephone settings” can be changed
on the “Phone settings” screen.
U0002AASLY
1. Push the “MENU” button on the Re-
mote Touch.
2. Select “Setup”.
3. Select “Phone”.
U10075LC
Please refer to the following pages for
each setting.
11 08.03HS250h_NAVI_U
75051U
Telephone settings —

SETUP
335
You can adjust the voice and ring vol-
ume.
U10076LC
1. Select “Volume”.
U10077LC
2. Change each setting according to
the following procedures.
3. When you complete all settings, se-
lect “Save”.
Automatic volume settings for high
speed
The system will automatically increase the
volume by one step up when the speed ex-
ceeds 50 mph (80 km/h).
DVoice volume setting
1. Select “Voice Volume”.
U10078LC
2. Select “–”or“+” to adjust the voice
volume.
3. Select “OK”.
DRing volume setting
1. Select “Ring Volume”.
U10079LC
2. Select “–”or“+” to adjust the ring
volume.
3. Select “OK”.
11 08.03HS250h_NAVI_U
75051U
—
Volume setting
12