2012 Lexus HS250h Navigation Manual

NAVIGATION SYSTEM: MEMORY POINTS
128
(c) Deleting address book entries
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Address Book” on the “Nav-
igation Settings” screen.
U4040LC
4. Select “Delete”.
U4041LC
5. Select the button to be deleted.
“Select All”:To select all addresses in the
address book.
“Unselect All”: To unselect all of the se-
lected addresses.
6. Select “Delete”.
7. To delete the address book entry, se-
lect “Yes”. To cancel the deletion, se-
lect “No”. Areas you want to avoid because of traffic
jams, construction work or other reasons
can be registered as areas to avoid.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Setup”.
3. Select “Navi.” on the “Setup”
screen.
U4042LC
4. Select “Areas to Avoid”.
U4043LC
DRegistering areas to avoid (See
page 129.)
DEditing areas to avoid (See page
130.)
DDeleting areas to avoid (See page
133.)
11 08.03HS250h_NAVI_U
75051U
— Setting up the “Areas to
Avoid”

NAVIGATION SYSTEM: MEMORY POINTS
129
(a) Registering areas to avoid
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Areas to Avoid” on the “Nav-
igation Settings” screen.
U4044LC
4. Select “New”.
U4045LC
5. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided.(See
“Destination search” on page 68.)
U4046LC
6. Scroll the map to the desired point.
“Adjust Location” : To adjust the position
in smaller increments.
7. Select “Enter”.
U4047LC
8. Select eitherorto
change the size of the area to be
avoided.
9. Select “OK”.
INFORMATION
D If a destination is input in the area to
avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be avoided may be shown.
D Up to 10 locations can be regis-
tered as points/areas to avoid.
11 08.03HS250h_NAVI_U
75051U
4

NAVIGATION SYSTEM: MEMORY POINTS
130
(b) Editing area to avoid
The name, location and/or area size of a
registered area can be edited.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Areas to Avoid” on the “Nav-
igation Settings” screen.
U4048LC
4. Select “Edit”.
U4049LC
5. Select the desired area button.
U4050LC
6. Select “Edit” for the item you want to
change.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 131.)
“Location”: To edit area location. (See
page 132.)
“Size”: To edit area size. (See page 132.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature select“On”
on the “Edit Area to Avoid” screen. To turn
off the feature select “Off”on the “Edit
Area to Avoid” screen.
7. Select “OK”.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: MEMORY POINTS
131
D
To change “Name”
U4051LC
1. Select “Edit” of “Name”.
U4052LC
2. Enter the name using alphanumeric
keys.
Up to 32 characters can be entered.
3. Select “OK”.
The previous screen will be displayed.
DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that
may be displayed on the map can be set.
U4053LC
To show the name, select “On” on the
“Area to Avoid” screen. To not show it,
select “Off”.
11 08.03HS250h_NAVI_U
75051U
4

NAVIGATION SYSTEM: MEMORY POINTS
132
D
To change “Location”
U4054LC
1. Select “Edit” of “Location”.
U4055LC
2. Select the 8 directional button to
move the cursorto the desired point
on the map.
3. Select “OK”.
The previous screen will be displayed.
DTo change “Size”
U4056LC
1. Select “Edit” of “Size”.
U4057LC
2. Select eitherorto
change the size of the area to be
avoided.
3. Select “OK”.
The previous screen will be displayed.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: MEMORY POINTS
133
(c) Deleting areas to avoid
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Areas to Avoid” on the “Nav-
igation Settings” screen.
U4058LC
4. Select “Delete”.
U4059LC
5. Select the button to be deleted.
“Select All”:To select all registered areas
to avoid in the system.
“Unselect All”: To unselect all registered
areas to avoid in the system.
6. Select “Delete”.
7. To delete the area, select “Yes”. To
cancel the deletion, select “No”. The previous destination can be deleted.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Setup”.
3. Select “Navi.” on the “Setup”
screen.
U4060LC
4. Select “Delete Previous Dest.”.
U4061LC
5. Select the button you want to delete.
“Select All”:
To select all previous des-
tinations in the system.
“Unselect All”: To unselect all previous
destinations in the system.
6. Select “Delete”.
11 08.03HS250h_NAVI_U
75051U
— Deleting previous
destinations
4

NAVIGATION SYSTEM: MEMORY POINTS
134
U4062LC
7. To delete the destination, select
“Yes”. To cancel the deletion, select
“No”.
11 08.03HS250h_NAVI_U
75051U

SECTION5
TELEPHONE AND INFORMATION
135
TELEPHONE AND INFORMATION
DTelephone (Hands− free system for cellular phone) 136
......
Enter a Bluetooth rphone 140
.............................
Call on the Bluetooth rphone 145
..........................
Receive on the Bluetooth rphone 152
......................
Talk on the Bluetooth rphone 152
..........................
D Fuel consumption 155
.....................................
D Calendar 156
.............................................
11 08.03HS250h_NAVI_U
7505 1U
5