2011 MITSUBISHI OUTLANDER SPORT battery

[x] Cancel search: battery

Page 480 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual For emergencies
6-5
6
As your vehicle has anti-lock brakesIf you drive your vehicle with a low battery charge after the
engine has been started by using jumper cables, the engine may
misfire. This can

Page 502 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual 7
Vehicle care and maintenance
Service precautions  . . . . . . . . . . . . . . . . . . . . . . . .7- 2
Catalytic converter . . . . . . . . . . . . . . . . . . . . . . . . .7- 3
Engine hood . . . . .

Page 503 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual 7-2 Vehicle care and maintenance
7Service precautions
N00937300332
Taking regular care of your vehicle will preserve its value and
appearance as long as possible.
You can do some of the maintenance wo

Page 504 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual Vehicle care and maintenance
7-3
7 Catalytic converter
N00937400447
The catalytic converter requires you to use unleaded fuel only.
Leaded gasoline will destroy the emission-control effective-
ness of

Page 507 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual 7-6 Vehicle care and maintenance
7
NOTEIf this does not close the engine hood properly, drop it
again from a slightly higher position.
Do not push down strongly on the engine hood. Depend-
ing on ho

Page 518 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual Vehicle care and maintenance
7-17
7
Fluid typeUse the brake fluid conforming to DOT 3 or DOT 4. The reser-
voir cap must be tightly sealed to keep dirt and water out.
Battery
N00939100871
The conditio

Page 519 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual 7-18 Vehicle care and maintenance
7
NOTEAfter replacing the battery, the electronic control system
data for the automatic transaxle, etc., will be erased.
As a result, shifting may be rough.
Shifting

Page 522 of 602

MITSUBISHI OUTLANDER SPORT 2011 3.G Owners Manual Vehicle care and maintenance
7-21
7
3. Install the upper cover, and then attach the moulding (D).NOTEAttach the moulding with the wide part toward the front of
the vehicle.4. Install the clips (E).
D