2011 HYUNDAI VERACRUZ Owners Manual

Page 169 of 419

HYUNDAI VERACRUZ 2011  Owners Manual 491
Features of your vehicle
❈❈  
2nd row outlet vents (E)
• The air flow of the 2nd row outlet vents is controlled by the front climate control 
system and delivered through the
inside air duct

Page 170 of 419

HYUNDAI VERACRUZ 2011  Owners Manual Features of your vehicle
92
4
Floor/Defrost-Level (A, C, F, D, E)
Most of the air flow is directed to the floor and the windshield with a small amount
directed to the side window defrosters.
Defrost-L

Page 171 of 419

HYUNDAI VERACRUZ 2011  Owners Manual 493
Features of your vehicle
D230103AEN
Air intake control 
This is used to select the outside (fresh) air position or recirculated air position. 
To change the air intake control position, 
push the

Page 172 of 419

HYUNDAI VERACRUZ 2011  Owners Manual Features of your vehicle
94
4
D230104AEN
Fan speed control
The ignition switch must be in the ON 
position for fan operation. 
The fan speed control knob allows you to 
control the fan speed of the ai

Page 173 of 419

HYUNDAI VERACRUZ 2011  Owners Manual 495
Features of your vehicle
D230200AEN Rear heating and air conditioning (if equipped) When the rear climate control selection 
button is not pressed (the indicator light
is not illuminated), the tem

Page 174 of 419

HYUNDAI VERACRUZ 2011  Owners Manual Features of your vehicle
96
4
 : Rear air blows from the upper
vents on the rear ceiling.
 : Rear air blows from the upper vents on the rear ceiling and the 
lower vents on the right rear trim.
 : Rea

Page 175 of 419

HYUNDAI VERACRUZ 2011  Owners Manual 497
Features of your vehicle
D230203AEN
Rear fan speed control
To change the fan speed, turn the knob 
to the right for higher speed or left for
lower speed. 
To turn off the fan, turn the knob to the

Page 176 of 419

HYUNDAI VERACRUZ 2011  Owners Manual Features of your vehicle
98
4
System operation 
D230501AUN
Ventilation
1. Set the mode to the  position. 
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature cont