2011 FORD KUGA Scr

E83478
303-1288
x1
303-12881
2
3
4
x2
E92595
x1
1
2
2
GAS Service Action Icon
Symbols are used inside the graphics and in the
text area to enhance the information display. The
following paragraphs describe the various types
and categories of symbols.
For additional information, refer to:Symbols
Glossary (100-00 General Information,
Description and Operation).
Prohibition symbols advise on prohibited actions
to either avoid damage or health and safety related
risks. These symbols are:
G836098en2008.50 Kuga8/2011
100-00- 9
General Information
100-00- 9
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

1
2
1
2
E85026
Health and Safety symbols recommend the use of
particular protection equipment to avoid or at least
reduce the risk or severity of possible injuries.
G836098en2008.50 Kuga8/2011
100-00-10
General Information
100-00- 10
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

2
1
3
E85027
Warning symbols are used to indicate potential
risks resulting from a certain component or area.
E85028
G836098en2008.50 Kuga8/2011
100-00-11
General Information
100-00- 11
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Instruction symbols are used to apply sealer,
lubricant, weight, tape or cleaning detergent to acomponent.
E84834
Location symbols are used to show the location of
a component or system within the vehicle.
G836098en2008.50 Kuga8/2011
100-00-
12
General Information
100-00- 12
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E84835
Gearshift lever or selector lever position symbols
are used to show which gearshift lever or selector
lever position is to be set.
G836098en2008.50 Kuga8/2011
100-00-13
General Information
100-00- 13
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E84836
308-640
Pointer symbols are used to draw attention to
components and give special instructions such as
a required sequence or number of components.
The number of components is reflected by the
value inside the luty arrow. A sequence number islocated inside the circle. Numbers inside circles
are also used to allocate special information such
as tightening torques or chemicals to a particular
component.
G836098en2008.50 Kuga8/2011
100-00-
14
General Information
100-00- 14
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E84837
2
1
1
2
3
x12
Movement arrows are used to show three
dimensional or rotational movements. Thesemovements can include specific values inside the
symbol if required.
E84838
G836098en2008.50 Kuga8/2011
100-00-
15
General Information
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
100-00-
15
TO BE UPDATED

Standard tool symbols recommend the use of
certain standard tools. These tools can includedimension values if required.
E84839
The following graphic illustrates a set of symbols
that are used to provide detailed information on
where to apply a material.
G836098en2008.50 Kuga8/2011
100-00-
16
General Information
100-00- 16
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL