Page 30 of 2057
E88973
1
3
4
5
2
Description
Item
Screwdriver
1
Cross bladed screwdriver
2
Flat bladed screwdriver
3Description
Item
Hexagonal screwdriver
4
TORX screwdriver
5
Pliers symbols
The pliers symbols are used to show which pliers
is recommended to carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00- 25
General Information
100-00- 25
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 31 of 2057
E88974
1
34
2
5
7
6
Description
Item
Combination pliers
1
Side cutter pliers
2Description
Item
Securing ring pliers - inner
3
Securing ring pliers - outer
4
G955392en2008.50 Kuga8/2011
100-00- 26
General Information
100-00- 26
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 32 of 2057
Description
Item
Hose clamp pliers
5
Locking pliers
6
Long nose pliers
7Drill symbols
The drill symbols are used to show which type and
size of drill bit is recommended to carry out a
procedure step.
123
45
E88975
M6M6
Description
Item
Drill bit with a specified diameter
1
Hole saw with a specified diameter
2
Stepped drill bit with a specified diameter
3
Tap with a specified diameter
4
Die with a specified diameter
5Description
Item
Scraper for circular holes
6
Scraper for straight edges
7
Cutting tool symbols
The cutting tool symbols are used to show which
type of cutting tool is recommended to carry out a
procedure step.
G955392en2008.50 Kuga8/2011
100-00- 27
General Information
100-00- 27
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 33 of 2057
E88976
123
456
7
5mm
5mm
1110
98
12
Description
Item
Cutting knife
1
Air body saw
2
Scissors
3
Grinder
4
Jig saw
5
Plasma cutter
6
Sanding Paper
7Description
Item
Drill through the shown number of body
panel layers with a specified diameter
8
Drill through the shown number of body
panel layers with a suitable diameter
9
Drill through 1 body panel layer with a
specified diameter
10
Drill through 1 body panel layer with a
suitable diameter
11
Wire brush
12
G955392en2008.50 Kuga8/2011
100-00- 28
General Information
100-00- 28
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 34 of 2057
Apply Chemical or load symbols
The apply chemical or load symbols are used toshow where to apply which type of chemical or
load to carry out a procedure step.
E88977
2
4
8
13
79
56
10mm
12
1314
10
18
G955392en2008.50 Kuga8/2011
100-00-
29
General Information
100-00- 29
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 35 of 2057

Description
Item
Apply the substance from the specified
tube
1
Apply the substance from the specified
cartridge
2
Apply the specified chemical with a brush
3
Apply the specified load to the specified
component
4
Apply a bead with a specific diameter from
the specified tube
5
Apply a bead with a specific diameter from
the specified cartridge
6
Apply the specified chemical with a roller
7
Apply hot glue to the specified component
8
Apply the specified amount of fluid from
the fluid can
9
Apply fluid from the fluid can
10
Clean the specified component with the
specified material
11Description
Item
Apply a broken bead from the specified
tube
12
Apply the specified chemical from a spray
can
13
Apply the specified lubricant to the
specified component
14
Apply spot welds to the specified
component
15
Apply a continuous weld to the specified
component
16
Handle the fluid using a syringe
17
Extract the specified amount of fluid using
a syringe
18
Measurement symbols
The measurement symbols are used to show
where to measure which type of measurement to
carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00-
30
General Information
100-00- 30
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 36 of 2057
Description
Item
Self contained breathing apparatus
4
General prohibition used in combination
with another symbol
5
Do not use power tools
6
Visual check
7
Noise check
8
Dispose the specified component
9
Replaced by item 9 (Dispose the specified
component)
10
Set the engine speed to the specified
value
11Description
Item
Fully apply the parking brake lever
12
Fully release the parking brake lever
13
Do not dispose of batteries into the waste
bin
14
Visual check using a mirror
15
Area/component must be dry
16
Mandatory Protective equipment - Health and safety
symbols
The protective equipment symbols advise to use
a mandatory protective equipment to avoid or at
least reduce possible health and safety risks.
G955392en2008.50 Kuga8/2011
100-00- 36
General Information
100-00- 36
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 37 of 2057
E88978
3
46
7
12
5
8
100
80°C100°C
80
°C
80
°C
121110
9
10.65 0.25+
-
mm
0.02
mm
0.02
mm
G955392en2008.50 Kuga8/2011
100-00- 31
General Information
100-00- 31
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL