Page 38 of 2057

Description
Item
Measure the current using a digital
multimeter
1
Measure the voltage using a digital
multimeter
2
Measure the resistance using a digital
multimeter
3
Measure the length/distance
4
Check that the specified pressure is
available using a suitable pressure gauge
5
Measure the pressure at the specified port
using a suitable pressure gauge
6
Measure the time using a suitable
stopwatch
7
Wait for the specified period of time
8
The specified task requires the specified
minimum temperature
9Description
Item
The specified task requires the specified
maximum temperature not to be exceeded
10
The specified task requires the specified
temperature range
11
The specified task requires the specified
temperature
12
Measure and check for the specified value
using a dial indicator gauge
13
Measure and check for the specified MAX
value using a dial indicator gauge
14
Measure and check for the specified MIN
value using a dial indicator gauge
15
General equipment symbols
The general equipment symbols are used to show
where to use which type of general equipment to
carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00-
32
General Information
100-00- 32
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 39 of 2057
E89019
12
34
56
Description
Item
Wear protective gloves
1
Wear face guard
2
Wear safety goggles
3
Wear ear protectors
4
Wear safety goggles and ear protectors
5
Wear a respirator
6Prohibition - Health and safety symbols and
component damage
The prohibition symbols are used to prohibit the
specified actions to avoid or at least reduce
possible component damage and health and safety
risks.
G955392en2008.50 Kuga8/2011
100-00- 37
General Information
100-00- 37
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 40 of 2057
E88979
123
4
Description
Item
Hot air gun
1
Soldering iron
2Description
Item
Scraper
3
Scriber
4
G955392en2008.50 Kuga8/2011
100-00- 33
General Information
100-00- 33
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 41 of 2057
Description
Item
Securing strap
5
File with a specified size
6
Center punch
7
Marker
8
Metal inert gas (MIG) welding equipment
9
Hose clamp
10
Interior trim remover
11
Vacuum cleaner
12
Strap wrench
13Description
Item
Wedge
14
Pin Punch
15
Air blow gun
16
Mallet
17
Relocate and support the component
18
Material symbols
The material symbols are used to show where to
use which type of material to carry out a procedure
step.
123
E88980
Description
Item
Remove/Install the specified blind rivet
1
Apply tape to the specified
component/area
2
Remove/Install the specified cable tie
3Miscellaneous symbols
These symbols provide further information that is
required to carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00- 34
General Information
100-00- 34
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 42 of 2057
E89020
12
34
56
7
Description
Item
General prohibition symbol
1
No naked flames
2
No smoking
3
No water
4
Do not touch
5Description
Item
Do not switch
6
No grinding
7
Warning symbols - Health and safety and component
damage
The warning symbols are used to advise on
hazardous conditions to avoid or at least reduce
possible component damage and health and safety
risks.
G955392en2008.50 Kuga8/2011
100-00- 38
General Information
100-00- 38
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 43 of 2057
E88981
3
4
12
56
789
P
P
1211
13
Description
Item
Set the ignition switch to the 0 position
1
Set the ignition switch to the II position
2Description
Item
The procedure step requires the aid of the
specified number of supporting technicians
3
G955392en2008.50 Kuga8/2011
100-00-
35
General Information
100-00- 35
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 44 of 2057
E89021
123
56
798
12
4
13
Description
Item
Hazardous voltage/Electrical
shock/Electrocution
1
Fire Hazard/Highly flammable
2
Burn hazard/Hot surface
3
Automatic start-up
4
Toxic
5
Explosive material
6
Battery hazard
7Description
Item
Corrosive material
8
Lifting hazard
9
Hand crush/Force from above
10
Cutting of fingers or hand
11
Pressure hazard
12
Invisible laser radiation. Do not view
directly with optical instruments
(magnifiers). Class 1M laser product
13
G955392en2008.50 Kuga8/2011
100-00-
39
General Information
100-00- 39
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL
Page 45 of 2057
Control Diagram symbols - Description and
Operation procedures
These symbols provide further information on the
type of connectivity, direction of flow or type of data
bus of a system.
E99427
1
2
3
4
Description
Item
Mid-speed Controller Area Network (CAN)
1
High-speed Controller Area Network
(CAN)
2
Local Interconnect Network (LIN)
3
Wires crossing not connected
4
G955392en2008.50 Kuga8/2011
100-00- 40
General Information
100-00- 40
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL