2011 AUDI S8 Owners Manual

Power windows
Controls
The driver can control all power windows.
Fig. 30 Section of the driver's door: Controls
All power window switches are provided with
a two-pos ition function:
Opening the windows
"' Press the switch to the first stop and hold it
until the window reaches the desired posi­
tion.
"' Press the switch briefly to the
second stop
to automatically open the window .
Closing the windows
"' Pull the switch to the first stop and hold it
until the window reaches the desired posi­
t ion.
"' Pull the switch briefly to the
second stop to
automatical ly close the window.
Power window switches
@ Driver's door
@ Passenger's door
© Left rear door
@ Right rear door
® Safety button (or two safety buttons in ve­
hicles with power child safety locks
<=>page38)
Child safety lock
When the safety button® c:> fig. 30 is press­
ed, the LED in the button lights up. The fol­
l owing features are switched off:
- The power windows in the rear doors,
Opening and closing 39
- The buttons for the power sun shades* in
the side windows,
- The buttons for the power sun shade* in the
rear window,
- Front passenger power seat adjustment*
button.
&_ WARNING ~
- When you leave your vehicle -even if on-
ly briefly - always take the ignit ion key
with you. This applies particularly when
children remain in the vehicle. Otherwise
the children could start the engine or op­
erate electrical equipment (e.g. power
windows). The power windows are func­
tional until the driver's door or passeng­
er 's door has been opened.
- Be careful when closing the windows.
Check to see that no one is in the way, or
serious injury could result!
- When locking the vehicle from outside,
the vehicle must be unoccupied since the
windows can no longer be opened in an
emergency .
(j) Tips
- The driver can lower or ra ise the power
sun shades* in the sid e windows by using
switches © and @.
- After the ignition has been switched off,
the windows can st ill be opened or
closed for about 10 minutes. The power
windows are not switched off until the
driver's door or passenger's door has
been opened.
What to do after a malfunction
The one-touch open and close function must
be reactivated if the battery has been discon­
nected.
"' Pull and ho ld the power window switch until
the window is fully closed.
"' Release the switch and then pull it again for
at leas t one second.

40 Opening and closing
Valet parking
The valet parking feature protects the lug­
gage comportment from unauthorized ac­
cess .
Fig. 31 Valet park ing button
With "valet pa rking" activated, the rear lid
cannot be opened.
.. Remove the mechanical key
c:> page 30 .
.,. Open the glove compartment and activate
¢
fig. 31 the "valet parking" feature by
pressing the
I VALET I button. The ind icator
light in the switch illuminates.
.,. Close the glove compartment and lock it
with the mechanical key .
.. Leave the master key with the service per­
sonnel
for parking and keep the mechanical
key with you .
When the "valet parking" feature is activated :
- the u nlocking button for the rear lid
c:5 in
the driver's door is inactive
- the butt on
c:5 on the master key is inac tive
- the opening hand le in the rear lid is inactive.
The vehicle can be driven and locked and un­ locked w ith the master key. Access to the lug­
gage compartment is blocked.
When the valet parking function is switched
on, the message
Valet parking activated ap­
pears in the instrument cluster display when
you switch the ign it ion on .
Sliding/tilting sunroof
Operation
Fig. 32 Section of the headl iner: Sliding/t iltin g sunroof
button
@ Tilting and sliding
.,. To t ilt the sunroof completely, press the
sw itch br iefly to the second level¢
fig. 32
briefly .
.. To close the sunroof completely, pull the
sw itch briefly to the second level¢,&. .
.. To select an intermediate position, press/
pull the switch to the first level until the de ­
sired position is reached .
@ Opening and closing
.,. To open the sunroof completely, slide the
button back briefly to the second level.
.. To close the sunroof completely, slide the
button forward briefly to the second level
q ,&..
.. To select a partially open pos ition, slide the
button forward/back to the first level until
the roof reaches the desired position.
A wind deflector integrated into the sliding/
t il ting sunroof adapts automatically to the
speed and sunroof pos ition . This reduces wind
noise to a m inimum in all sunroof positions .
You can still close or open the sunroof for up
to ten minutes after you have switched the ig­
nition off . The switch is deact ivated once the
driver's or front passenger's door is opened.
Solar protection
The solar protection opens automatically
when the sunroof opens.

Vehicles with a glass panel sunroof: the sun
shade can be opened and closed by hand
when the sunroof is closed.
Vehicles w ith a so lar panel s unroof*: the
closed sunshade opens automatica lly when
the sunroof opens.
A WARNING
Pay careful attention when closing the
sliding/tilting sunroof - otherwise serious
injury cou ld result! Nehmen Sie deshalb
beim Verlassen des Fahrzeugs stets den
Zi.indschli.issel mit .
(D Note
Always close your sliding/tilting sunroof
when leaving your vehicle. Sudden rain can
cause damage to the interior equipment of
your veh icle, particu larly the electronic
equipment .
(D Tips
Information regarding the solar roof*
Qpage 77.
Emergency closing of the sliding/tilting
sunroof
If th e sun roof detects an object in its path
when it is closing, it will open again automati­
cally. In this case, you can close the roof with
the power emergency closing function.
.. Within
five seconds after the sunroof opens
automatically, pull the switch until the roof
closes .
Opening and closing 41
Panoramic sunroof
Opening/closing the roof
Applies to vehicles: with panoramic sunroof
Fig. 33 Section of the front headliner: panora mic sun­
roof button
Fig. 34 Rear door: pa noramic sunro of butto n
@Tilting the front segment of the roof
.. To tilt the sunroof completely, press the
button up briefly to the second level~-
.,. To close the sun roof completely, pull the
button
~ down briefly to the second leve l
Q.&. .
.. To select a tilted position, press/pull the
button[;] to the first level until the desired
position is reached.
@ Sliding the front segment of the roof
.,. To open the sunroof completely, slide the
button [;] back to jus t before the second
level
Q fig. 33 .
.. To close the sunroof completely, slide the
button
~ forward briefly to the second lev­
el
q .&_ .
.. To select a partially open position, slide the
button[;] forward/back to the first level un-
til the desired position is reached . .,.

42 Opening and closing
Tilting the rear segment of the roof
The rear segment of the roof can be operated
both from the cockpit and from the rear seat.
,. To tilt the sunroof complete ly, press the
button
!«>I in the rear door br iefly to the sec­
ond level ¢
fig. 34.
,. To close the sunroo f completely, pu ll the
button ~ up briefly to the second level
¢A .
,. To select a tilted position, press/pull the
button
!«>I to the first level until the desired
pos it ion is reached . Or
,. To operate the roof from the cockpit, press
the
I REAR MODE! button ¢ fig. 33. You can
now open/close the rear segment of the roof
using the button~ in the headl iner. The
LED in the front of the headliner turns on
when the rear roof segment is tilted .
After the ignit ion is switched off, you can st ill
ope rate the panoramic sun roof for about
10
minutes . The switch is deactivated once the
driver's or front passenger's door is opened .
& WARNING
Be careful when closing the panoramic
sunroof - otherwise serious injury could re­
sult! For this reason, always remove the ig­
nition key when leaving the vehicle.
{[) Note
Always close your panoramic sunroof when
leaving your vehicle. Sudden rain can cause
damage to the interior equ ipment of your
veh icle, part icularly the electronic equ ip­
ment.
(D Tips
- Information regarding convenience
opening/closing ¢
page 32.
- To prevent both roof segments from col­
liding with one another, you do not need
to
- tilt the rear roof segment if the front
roof segment is already open.
- close the front roof segment if the rear
roof segment is already tilted.
Opening/closing the sun shade
Applies to vehicles: with panoramic sunroof
© Front sun shade
"'To open the sun shade completely, slide the
button
G;l back to just before the second lev­
el ¢
page 41, fig. 33 .
,. To close the sun shade comp letely, slide the
button ~ forward briefly to the second lev ­
el.
,,, To select a partially open position, slide the
button ~ to the first level until the desired
position is reached.
© Rear sun shade
,. To open the sun shade completely, press the
button ~ in the rear door briefly to the sec­
ond level ¢
page 41, fig. 34.
,. To close the sun shade completely, pull the
button ~ up to the second level¢
A.
,. To select a partially open pos ition, press/
pull the button~ to the first level until the
desired position is reached . Or
,. To operate the sun shade from the cockpit,
press the
I REA R MODE! button¢ page 41,
fig. 33. You can now open/close the rear sun
shade using the button~ in the headliner.
A WARNING
--
Be carefu l when closing the panoramic
sunroof- otherw ise serious in jury could re­
sult! For th is reason, always remove the ig­
nition key when leaving the vehicle.
Roof segment/sun shade emergency
closing
Applies to vehicles: with panoramic sunroof
If the roof segment or sun shade detects an
object in its path when it is closing, it will
open again automatically . In this case, you
can then close it with the power emergency
closing function.
,. Within five seconds after the roof segment
or sun shade opens automatica lly, pull the
switch until it closes.

Clear vision Lights
Switching the headlights on and off
Fig . 35 Instrument pane l: lig ht sw itc h wit h all -weath­
er ligh ts•
The headlights only wo rk when the ignition is
switched on. Wh ile start ing the eng ine o r
when switching off the ign ition, the head­
lights will go off and on ly the side marker
lights will be on .
If the system is not operating p roperly, a
war ning symbol in the dr iver information dis­
p lay is d isplayed
c::, page 21 .
Light switch ·'ti- -
Tu rn the switch c::> fig . 35 to the correspond ing
position . When the lights are switched on, the
:oo: symbo l tu rns on .
0 · The lig hts are off or the dayt ime runn ing
lights are on:
- USA models: The daytime running lights
will come on automatically when the igni­
t ion is on and the light switch
c::, fig . 35 is in
the
O posit ion or the AUTO position (only in
daylight cond itions). The
Daytime running
light s
function can be turned on and off in
t h e M MI
c::> page44, c::>A .
-Canada model s: The daytime running lig hts
will come on automa tically when the igni­
t ion is on and the light switch
c::> fig . 35 is in
the
O position, the : oo: pos ition or the AUTO
position (only in daylight conditions) c::> A .
AUTO -Automatic headlights swi tch on and
off depend ing o n brightness, for example i n
tw ilight, during rain or in tunnels
c::, &. .
Clear vision 43
:oo: -Parking lig hts
gD -Low beam headlights
~ -All-weather lig hts* (vehicles with LED
headlights *)
c::, fig. 35
@!] -Rear fog lights*. When the rear fog lights
are on, the symbol
0$ on the switch will illu­
minate .
All-weather lights*
In vehicles with all-weather lights, the front
lights are ad justed automatically so that you
are less like ly to see glare from your own
headlights, for example when dr iving on a wet
road.
Automat ic dynamic headlight range
con trol*
Your vehicle is equipped with a headlight
range cont ro l system so that the headlights
do not bl ind oncoming traff ic if the vehicle
load cha nges. The headlight range a lso ad­
justs au toma tic ally when braking and acceler­
at ing .
Light funct ions
The following light funct ions are availab le de­
pend ing on vehicle equipment and on ly func­
tion when the light switch is in the AUTO posi­
t ion. You can dea ctivate these functions i n the
MM I under
Audi adaptive light c::>page 44.
Static corn ering light * (vehicles with LED
headlights o r adaptive light) - the corner ing
ligh t sw itches on automa tically w hen the
stee ring wheel is turned at a ce rtain angle at
speeds up to approximately 4 4 mph (70 km/
h) and when the turn signal is activated at
speeds up to approximate ly 25 mph (40 km/
h). The area to the s ide of the vehicle is illumi­
nated better when turn ing .
Dynamic cu rve light* (vehicles with adaptive
li ght) - the curve light only functions at
speeds between approximately 6 mph (10
km/h) and 110 km/h and adapts itself to the
curves in the road.

44 Clear vision
Highway light function*
(vehicles with LED
headlights) -this function adapts the lighting
for highway driving based on vehicle speed.
.&_ WARNING
- Automatic headlights are only intended
to assist the driver . They do not relieve
the driver of his responsibility to check the headlights and to turn them on man­
ually according to the current light and
visibility conditions . For example, fog
cannot be detected by the light sensors.
So always switch on the headlights §,0
under these weather conditions and
when driving in the dark.
- Crashes can happen when you cannot see the road ahead and when you cannot be seen by other motorists. Always turn on
the headlights so that you can see ahead
and so that others can see your car from
the back .
(D Note
The rear fog lights should only be turned
on in accordance with traffic regulation, as
the lights are bright for following traffic.
(D Tips
- In the event of a light sensor malfunc­
tion, the driver is notified in the instru­
ment cluster display
q page 21 .
-You will hear a warning tone if you open
the driver door when the exterior lights
are switched on.
- Please observe legal regulations when
using the lighting systems described .
Emergency flasher
The emergency flasher makes other motorists
aware that you or your vehicle ore in on emer­
gency situation .
Fig. 36 Ce nte r co nso le: em erg en cy flash er sw itch
.,. Press the switch~ c:> fig. 36 to turn the
emergency flashers on or off.
When the emergency flasher is on, all four
turn signals blink at the same time. The turn
signal indicator lights¢¢ in the instrument
cluster, as well as the light in the emergency
flasher switch
~ blink likewise.
The emergency flashers will turn on automati­
cally if you are in an accident where the airbag
has deployed.
@ Tips
You should turn on the emergency flashers
when:
- you are the last vehicle standing in a traf­
fic jam so that any other vehicles coming
can see you, or when
- your vehicle has broken down or you are
in an emergency situation, or when
-your vehicle is being towed by a tow
truck or if you are towing another vehicle
behind you.
Adjusting the exterior lighting
The settings ore adjusted in the MMI.
"'Select: !CARI function button> Car systems
control button > Vehicle settings > Exterior
lighting. ""

Automatic headlights
You can adjust the following settings in the
Automatic headlights menu:
Headlights activation time -You can adjust if
the headlights switch on
Early, Med . or Late
according to the sensitivity of the light sensor.
Audi adaptive light* -You can switch adaptive
light
On and Off.
Daytime running lights
USA models:
You can switch the dayt ime run­
n ing lights
on and off .
Canada models :
The function cannot be
turned off . It is activated automatically each
time the ignition is switched on. This menu
item is shown "greyed out".
Coming home, Leaving home
The coming home function illuminates the
area outside the vehicle when you switch the
ignition off and open the driver's door. To turn
the function on, select
Lights when leaving
car > On .
The leaving home function illuminates the
area outside the vehicle when you un lock the
vehicle. To turn the funct ion on, select
Lights
when unlocking car > On .
The coming home and leaving home functions
only operate when it is dark and the light
switch is in the
AUTO pos ition. Clear
vision 45
Turn signal lever
The lever on the left side of the steering col­
umn is used to operate the turn signals and
the high beam as well as the headlight flash­
er.
Fig. 37 Tu rn signal and high beam lever
The turn signa l and high beam lever has the
following funct ions :
Turn signals ¢ 9 ©@
.,. Push the lever up as fa r as it can go to turn
on the right turn signa l or down to turn on
the left tu rn s ignal ¢
fig. 3 7.
... Move the lever briefly unti l you meet resist­
ance and re lease it to flash three times.
.,. Move the lever (up or down) until you meet
resistance and hold it there to determine
the flashing time for the turn signals.
High beam ~D @
... Push the lever forward to switch on the high
beam .
.,. Pull the lever back towards you to switch
off
the high beam.
Headlight flasher ~D ©
... Pull the lever toward the steering wheel to
use the headlight flasher.
Notes on these features
-The turn signals on ly work w ith the ignition
sw itched on. The indica tor l ights
R or II in
the instrument cluster
¢page 11 also blink.
-Aft er you have turned a corner, the turn sig-
nal switches
off automatically.
- The
high beam works only when the head-
lights are on. The indicator light . in the .,.

46 Clear vision
instrument cluster illuminates when the
high beams are on.
- The
headlight flash er works only as long as
you hold the lever - even if there are no
lights turned on. The indicator light. in
the instrument cluster illuminates when you
use the headlight flasher.
(D Note
Do not use the high beam or headlight
flasher if you know that these could blind
oncoming traffic .
Interior lights
Front and rear interior lighting
Fig. 38 Headliner: Front interior l ig hts
Fig. 39 Rear headliner : Reading light
Press the appropriate button ¢ fig. 38:
§} -Interior lighting on/off
I]-Door contact switch. The interior lighting
turns on automatically when you unlock the
vehicle, open a door or switch the ignition off.
The interior lighting turns off several seconds
after you close the doors, when you lock the
vehicle or when you switch the ignition on.
When a door is open, the light turns off after
a few minutes.
L:!l -Reading lights on/off
~ - Switching the rear reading lights on/off
from the cockpit.
IREAR MODEt* - Sw itch ing the rear reading
lights on/off from the cockpit : press the
I REAR MODE i button and then the appropriate
button
L:!l in the cockpit .
Ambience lighting
Applies to vehicles: wi th ambience lig htin g
You can select a color profile and brightness
for the ambience lighting in various areas of
the vehicle, called zones.
Turning ambience lighting on
.,. Select in the MMI: ICARI function button >
Car systems control button > Vehicle set­
tings > Interior lighting > On.
Adjusting/turning off the brightness
.,. Select in the MMI: ICARlfunction button>
Car systems control button > Vehicle set­
tings > Interior lighting
> Brightnes s .
.,. Turn the knob to the desired vehicle area
and press the knob. The bar that appears in­
dicates the selected brightness .
.,. To increase or reduce the brightness, turn
the knob and press it.
Selecting a color profile*
.,. Select in the MMI: ICARlfunction button>
Car systems control button > Vehicle set­
tings > Interior lighting > Color profile.
The ambience lighting turns on when the
function is activated in the MMI and when you
turn the headlights on while the ignition is switched on.
Adjusting the brightness
You can adjust the brightness for the four
zones
Front top, Front footwell, Rear top and
Rear footwell or for All areas at the same
time . ..,.