2011 Acura TSX Owner's Manual

Before Performing Maintenance
Parts and Fluids Used in Maintenance Service
224Maintenance
The use of Acura genuine parts and fluids is recommended when maintaining and
servicing your vehicle. Acura genuine parts are manufactured according to the
same high quality standards used in Acura vehicles
Parts and Fluids Used in Maintenance Service

225
Continued
Maintenance
If the engine oil life is less than 15%, you will see the Maintenance Minder
messages appear on the multi-information display every time you turn the ignition
switch to ON
II
. The messages notify you when to change the engine oil, or
when to bring your vehicle to a dealer for indicated maintenance services.
Displaying the Engine Oil Life
1. Turn the ignition switch to ON
II
.
2. Press the SEL /RESET button repeatedly until the engine oil life appears on the
multi-information display.
The system message indicator (
) comes on along with the Maintenance Minder
message.
Displaying the Engine Oil Life
Based on the engine operating conditions, the
remaining engine oil life is calculated and displayed
as a percentage.
Displayed Engine Oil
Life (%)Calculated Engine Oil
Life (%)
10 0 10 0 to 91
90 90 to 81
80 80 to 71
70 70 to 61
60 60 to 51
50 50 to 41
40 40 to 31
30 30 to 21
20 20 to 16
15 15 to 11
10 10 to 6
5 5 to 1
00
Maintenance Minder™
Maintenance
Service Items
Remaining
Engine Oil Life
SEL /RESET
Button

226Maintenance
Maintenance Minder™ Maintenance Minder Messages on the Multi-Information DisplayMaintenance Message
Oil Life Display Explanation Information
The remaining engine oil life is 15
to 6 percent. Once you switch the
display by pressing the

(Information) button this message
will go off.The engine oil is approaching
the end of its service life, and
the maintenance items should be
inspected and serviced soon.
The remaining engine oil life is 5 to
1 percent. Press the
button
to switch to another display.The engine oil has almost reached
the end of its service life, and
the maintenance items should be
inspected and serviced as soon as
possible.
The remaining engine oil life
has passed its service life, and a
negative distance appears after
driving over 10 miles (U.S. models)
or 10 km (Canadian models). Press
the
button to switch to
another display.The engine oil life has passed.
The maintenance items must
be inspected and serviced
immediately.
SERVICE DUE SOONSERVICE DUE NOWSERVICE PAST DUE
U.S.
Canada
Negative Distance
5 % 15 %
U.S.
Canada

227
Maintenance
Continued
Maintenance Minder™
Maintenance Service ItemsCODE Maintenance Main Items
A Replace engine oilt
*1
B Replace engine oilt
*1 and oil filter
Inspect front and rear brakes t
Check parking brake adjustment t
Inspect tie rod ends, steering gear box, and boots t
Inspect suspension components t
Inspect driveshaft boots t
Inspect brake hoses and lines (Including ABS) t
*OTQFDU
BMM
nVJE
MFWFMT
BOE
DPOEJUJPO
PG
nVJET t
Inspect exhaust system t
#
Inspect fuel lines and connections t
#
CODE Maintenance Sub Items
1 Rotate tirest
2 Replace air cleaner elementt
*2
Replace dust and pollen filter t
*3
Inspect drive belt t
33FQMBDF
USBOTNJTTJPO
nVJE t
*4
4 Replace spark plugst
Replace timing belt and inspect water pump t
*5
Inspect valve clearance t
5 Replace engine coolantt
*4: If you drive regularly in mountainous areas or tow a trailer, replace the transmission fluid at 60,000
miles (100,000 km), then every 30,000 miles (48,000 km). (automatic transmission models only)
*5: If you drive regularly in very high temperatures (over 110 °F, 43 °C ), in very low temperatures (under
-20 °F, -29 °C), or tow a trailer, replace every 60,000 miles/100,000 km. (6-cylinder models only)
#: See information on maintenance and emissions warranty. *1: Change the engine oil according to the Maintenance Minder, or annually, whichever comes first.
*2: If you drive primarily in dusty conditions, replace the air cleaner element every 15,000 miles (24,000
km).
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and
from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).
Maintenance Service Items
Independent of the Maintenance Minder tinformation, replace the brake fluid every 3 years.
Inspect idle speed every 160,000 miles (256,000 tkm).
Adjust the valves during services A, B, 1, 2, or 3 tonly if they are noisy. Maintenance Minder
Message System Message
Indicator
Main Items
Sub Items

228Maintenance
Maintenance Minder™ Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
II
.
2. Display the engine oil life by repeatedly pressing the SEL /RESET button.
3. Press and hold the SEL /RESET button for 10 seconds or more.

The oil life reset mode is displayed on the multi-information display.
4. S e l e c t ”R E S E T” w i t h t h e
button.

The service code will disappear and the engine oil life display will return to
10 0 %.
To cancel the oil life reset mode, select ”CANCEL”, then press the SEL /RESET
button.
Resetting the Display NOTICE Failure to reset the engine oil life after a
maintenance service results in the system showing
incorrect maintenance intervals, which can lead to
serious mechanical problems.
The dealer will reset the engine oil life display after
completing the required maintenance service. If
someone other than a dealer performs maintenance
service, reset the engine oil life display yourself.
SEL /RESET
Button

(Information)
ButtonEngine Oil LifeMaintenance
Item Codes

229
Maintenance Under the Hood
Maintenance
Maintenance Items Under the Hood 4-cylinder models
Brake Fluid
(Black Cap)
Engine Oil Dipstick
(Orange Handle)
Washer Fluid
(Blue Cap)
Engine Coolant
Reservoir
Radiator Cap
Manual transmission models Clutch Fluid
(Light Gray Cap)
Engine Oil Fill Cap Automatic transmission models Automatic Transmission Fluid
Dipstick (Yellow Loop)

Maintenance Under the Hood
Maintenance Items Under the Hood
230Maintenance
6-cylinder models
Engine Oil Dipstick
(Orange Loop)
Washer Fluid
(Blue Cap)
Engine Coolant
Reservoir*
Radiator Cap*
* : Located under the coverBrake Fluid
(Black Cap)
Engine Oil Fill Cap
Automatic
Transmission
Fluid Dipstick
(Yellow Loop)

Maintenance Under the Hood
Opening the Hood
231
Continued
Maintenance
Opening the Hood
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.

The hood will pop up slightly.
3. Push up the hood latch lever in the center
of the hood to release the lock mechanism,
and open the hood.
4-cylinder models 4. Remove the support rod from the clamp
using the grip. Mount the support rod in
the hood.
When closing, remove the support rod, and
stow it in the clamp, then gently lower the
hood. Remove your hand at a height of
approximately 12 inches (30 cm) and let the
hood close.
Opening the Hood NOTICE Do not open the hood when the wiper arms are
raised.
The hood will strike the wipers, and may damage
either the hood or the wipers.
When closing the hood, check that the hood is
securely latched.
If the hood latch lever moves stiffly, or if you can
open the hood without lifting the lever, the latch
mechanism should be cleaned and lubricated.
Grip
ClipSupport Rod
Hood Release Handle
Pull
Lever