2010 Seat Leon 5D MEDIA SYSTEM 2.2

Audio mode
16If the TP function is on (display: TP), it is only possible to change to stations
that accept this function ⇒page 21.
Opening the FM station list
The FM station list shows all the FM stations with good reception. You can
select a specific station from the FM station list.•Switch to the FM frequency band ⇒page 15.•Press the function button and press the function button in
the pop-up window ⇒page 15, fig. 6 .•Alternatively:if the display station buttons off is ⇒ page 18, by turning
the setting knob ⇒page 8, fig. 1 it is possible to change directly to the
station list.
The FM station list view closes after one minute of inactivity. The FM station
list is updated automatically.
No station list is available for the AM frequency band.
Selecting stations from the FM station list and saving them•Open the FM station list.•Mark a station by turning the setting knob and press the setting knob to
select the marked station ⇒page 10.•Alternatively: Drag the scroll marker to browse the list and select the
desired station by pressing it on the screen ⇒page 10.•After selecting a station button, press the function button
⇒ page 15, fig. 7 to store the marked station ⇒ page 18.•To close the FM station list press the unit button.
Scan function (Scan)When the scan function is running, all available stations on the current
frequency band are played in sequence for roughly 5 seconds each.
Band
FM/List
A10
Store

Fig. 8 RADIO main menu:
Extras function button.Fig. 9 RADIO main menu
during scan.
MediaSystem2.1_EN.book Seite 16 Donnerstag, 29. April 2010 4:18 16

Audio mode17
Starting and stopping the scan function•Open the RADIO main menu and select a frequency band ⇒ page 15.•Press the function button.•In the pop-up window, press the function button ⇒page 16, fig. 8 .•The scan function starts and the function button changes to
⇒ page 16, fig. 9.•Briefly press the function button or the setting knob ⇒page 8,
fig. 1 to stop the scan function at the station that is currently playing.
The scan function also stops when you manually select a station with the
arrow buttons or station buttons, or the scan is interrupted by a traffic
announcement (traffic news TP ⇒page 21).Tuning to a station frequency manually•Open the RADIO main menu and select a frequency band ⇒ page 15.•Press the function button.
•In the pop-up window, press the function button ⇒ page 16,
fig. 8 .•The frequency of the currently selected station is displayed and the
function button changes to ⇒fig. 10 .•Changing the frequency in steps: turn the setting knob ⇒page 8, fig. 1
.•Scanning rapidly through frequency bands: press and hold the arrow
button or . When you release the arrow button, the unit automatically
tunes to the next available radio station.•Press the function button to close manual frequency selection.
After approx. 10 seconds of inactivity, the manual frequency selection closes
automatically.
Manual frequency selection is also closed if you select a station with a station
button or switch to the FM station list view.
If the selected station is RDS-enabled, the station name is displayed below
the frequency ⇒ fig. 10(Radio 2).
Extras
ScanExtras
Scan
Scan
A10
Fig. 10 Tuning to a radio
station manually.
Extras
Manual
Extras
Manual
A10
ƒ
„Manual
MediaSystem2.1_EN.book Seite 17 Donnerstag, 29. April 2010 4:18 16

Audio mode
18Hiding and displaying station buttons and storing stationsIn the main RADIO menu, the radio stations can be saved in numbered func-
tion buttons ⇒ fig. 12. These function buttons are called “station buttons”.
Station buttons can be hidden or displayed. Displaying and hiding the station buttons
•In the
RADIO main menu, press the function button ⇒fig. 11 .•To hide or display the station buttons, clear or tick the checkbox in the
function button by briefly pressing it.•When the checkbox is ticked
’, six station buttons are displayed in the
RADIO main menu ⇒fig. 12 .
•Turn the setting knob ⇒page 8, fig. 1 to select a station button. If you
are selecting the first or last station button, when the setting knob is turned
either way, the next six station buttons are displayed.
If, even though the check box has been ticked, the station buttons are not
displayed, the “radio text” option may be activated ⇒page 21.
Saving stations in station button
If a station is saved to a station button, any station previously saved to the
button will be overwritten.•Display the station buttons and select a station.•Press and hold the desired station button until you hear a tone.•The currently selected station is saved to the station button ⇒page 19,
fig. 13.•ALTERNATIVELY: Select the station button by turning the setting knob and
press and hold the setting knob until you hear a tone.
The stations can also be saved with only the settings knob.•Press and hold the settings knob until the next free station button for the
currently selected station is automatically displayed.•Turn the setting knob to select another station button.•Briefly press the setting button to save the station.
The stations can also be selected by displaying the station list ⇒page 16.
If a station name has been sent by the RDS and saved incorrectly, it is
possible to change its name ⇒page 21.
Fig. 11 RADIO main
menu: Extras function
button.F i g . 1 2 R A D I O m a i n m e n u
with station buttons
displayed.
Extras
Presets
A10
MediaSystem2.1_EN.book Seite 18 Donnerstag, 29. April 2010 4:18 16

Audio mode19
You can delete the stations stored to the station buttons individually or all
together ⇒page 19.
Note
If you do not usually use the station buttons to select stations, SEAT recom-
mends that you hide the station buttons. You can then go straight to the
station list by turning the setting knob ⇒page 16.Selecting stations saved on the station buttonsIt may be necessary to hide the “radio text” ⇒ page 21.•Open the RADIO main menu and if necessary adjust the setting to display
the station buttons ⇒ page 18.•Turn the setting knob ⇒page 8, fig. 1 to select a station button. The
station stored to the marked station button will be displayed.•Press the setting knob to select the displayed station.
•ALTERNATIVELY: Briefly press the station button on the screen to select
the stored station directly.•Alternatively: if
­
is displayed ⇒fig. 13 , the stored stations can be
activated one after the other by pressing the arrow keys and
⇒ page 19.
The stations in all the frequencies can be changed. The stored stations can be
deleted one by one or all together ⇒page 19.
It is only possible to play a stored station if it can be received at your current
location.
Radio setup menu (SETUP)In the RADIO main menu, press the unit button to open the Radio
setup menu .
F i g . 1 3 R A D I O m a i n m e n u
with station buttons
displayed.
A10
ƒ
„
Fig. 14 Setup menu for
Radio mode.
SETUP
MediaSystem2.1_EN.book Seite 19 Donnerstag, 29. April 2010 4:18 16

Audio mode
20Function button: Result
: The TP function is switched on ⇒page 21.: Define the station selection for the arrow buttons and
.: All available stations on the selected frequency band can be
browsed with the arrow buttons ⇒page 15.: Using only the arrow keys, switch between the stored sta-
tions ⇒ page 19 (display:
­
⇒ page 19, fig. 13).
: Define the setting for automatic station tracking with RDS
⇒ page 21.: The unit always switches to the radio station's frequency
that currently offers the best reception. As a result, regional pro-
grammes may be interrupted.
: For as long as possible, the unit only switches to alternative fre-
quencies for the selected radio station that broadcast the same
regional service.: in units with a DAB radio receiver, this may affect other addi-
tional settings ⇒page 24.: Delete stations stored to station buttons.
: All stored stations will be deleted.: Tu rn the setting knob ⇒page 8, fig. 1 to display, one after
the other, all the stations stored on the station buttons, and press the
same button to delete the station displayed.
To cancel, press the unit button ⇒page 8, fig. 1 .’ Traffic news (TP)b Arrow buttons
ƒ
„
StationsPresets
bRDS Regional
AutomaticFixed
DAB settingsDelete preset list
AllOne
A10

A8
MediaSystem2.1_EN.book Seite 20 Donnerstag, 29. April 2010 4:18 16

Audio mode21
RDS radio data and TP (Traffic Programme)
servicesIntroductionRDS (Radio Data System) is a radio data service for broadcasting programme
and additional service identifiers, and displaying station names and radio
text, automatic station tracking and traffic programmes.
The RDS is not compatible with all equipment and is not available everywhere
or on all radio stations.
Without RDS it is not possible to use the RDS radio services .
Additional Information:•Safety notes
’ ⇒ page 6
•Unit overview ⇒ page 8•Radio mode ⇒page 14Note
The radio station is responsible for the content of the broadcast
information.
RDS and radio textIf the RDS service is available and the quality of reception is good enough, the
station name may be displayed in Radio mode ⇒fig. 15 .
Automatic station tracking
Some FM stations broadcast different content (temporary or permanent) on
different wavelengths using the same name depending on the region.
By default, automatic station tracking always switches to the currently
selected radio station's frequency that offers the best reception, as the
vehicle travels from one area to the next. As a result, you may lose the
regional programme you are listening to. The automatic change of station can
be deleted using the setting menu Radio ⇒ page 19.
Display and delete the radio text
Some RDS-enabled stations also broadcast additional text information
known as radio text. It is possible to adjust the display to show radio text.•In the RADIO main menu, press the unit button.
Fig. 15 Main RADIO
menu with station name
display and TP function
activated.
º
MediaSystem2.1_EN.book Seite 21 Donnerstag, 29. April 2010 4:18 16

Audio mode
22While radio text is switched on
º is shown at the top right of the screen.
Radio text is switched off as the default factory setting.
Changing stored radio station names (RDS)
Sometimes when a station is stored, the station name is not correctly
displayed.
•Select the stored station ⇒page 14.•Wait until the correct station name is displayed and then briefly press the
setting knob ⇒ page 8, fig. 1 .•The text that is currently displayed will be stored as the station name.TP function (Traffic Programme)
While the traffic news tracking function is on, the news bulletins will be acti-
vated in the audio mode currently playing.
Traffic news monitoring with the TP function is only possible if the TP station
is available.
Some stations that do not broadcast their own traffic news support the TP
function by being linked to a traffic news station (EON). Traffic announce-
ments broadcast by the linked traffic news station interrupt the current audio
mode.
Switching the TP function on and off•Open the RADIO main menu and select the FM frequency band
⇒ page 14.•Press the function button.•Press the function button to tick the checkbox
’ ⇒ fig. 16 .
•If the station that is currently selected does not support the TP function,
the unit will automatically search for a TP station.•Clearing the checkbox switches the TP function off.
A10
Fig. 16 Switching on the
TP function.
Fig. 17 Media mode with
traffic news monitoring
active.
ExtrasTP
MediaSystem2.1_EN.book Seite 22 Donnerstag, 29. April 2010 4:18 16

Audio mode23
You can also switch the TP function on and off in the Media setup menu
⇒ page 40.
TP function on
Irrespective of the currently selected station, an additional component of the
receiver ensures that a station which broadcasts traffic programmes is always
received.
While the Media mode is on, it will always try to tune in to a traffic station in
the background.
If the traffic news tracking function is available, TP is displayed on the upper
right corner of the screen ⇒page 22, fig. 17 .
When no radio stations are received, for example, when the reception is
generally poor, No TP is displayed.Incoming traffic announcement An incoming traffic announcement will interrupt the active audio mode.
•A pop-up window opens ⇒fig. 18.•If required, the radio-navigation system is switched to the traffic news
station (EON) for the duration of the traffic announcement.•The media mode will be paused and the volume will be adjusted to the
preset level ⇒page 88.•If the traffic announcement volume is adjusted with the volume
control
D, this setting will be retained for future announcements.
•Pressing the function button stops the current traffic announce-
ment.•Pressing the function button switches the TP function off
permanently.
Fig. 18 Incoming traffic
announcement.
CancelDeactivate TP
MediaSystem2.1_EN.book Seite 23 Donnerstag, 29. April 2010 4:18 16