2010 NISSAN ALTIMA COUPE Navigation Manual

6. Select the freeway of the destination from
the list.7. Select “Entrance” or “Exit”. A list screen is
displayed.8. Select the preferred destination from the
list. The position of the selected location is
displayed in the preview on the right side of
the screen.
NDE0057NDE0058NDE0059
4-26Setting a destination

INFO:
By selecting “By Distance”, the list can be sorted
by the nearest distance.9. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
SETTING AN INTERSECTION
An intersection of any two streets can be set as
the destination to which the system calculates a
route.1. Press DEST.
2. Select “Next Page”.
NDE0060NDE0061NDE0045
Setting a destination4-27

3. Select “Intersection”. A character input
screen is displayed.4. Enter the name of the 1st street. After finish-
ing the entry, select “List”.
A list screen is displayed.5. Select a street as the 1st street from the list.
A character input screen is displayed.
NDE0062NDE0063NDE0064
4-28Setting a destination

6. Enter the name of the 2nd street.
After finishing the entry, select “List”. A list
screen is displayed.7. Select a street as the 2nd street from the
list.8. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
SETTING A CITY CENTER
The system can calculate a route to the center of
a city, without setting a specific location.
NDE0065NDE0066NDE0067
Setting a destination4-29

1. Press DEST.
2. Select “Next Page”.3. Select “City Center”. A character input
screen is displayed.4. Enter the name of the city, select “List”. A
list screen is displayed.
INFO:
Select “Last 5 Cities” to display 5 cities recently
set as destinations.
NDE0045NDE0068NDE0069
4-30Setting a destination

5. Select the preferred destination from the
list. The position of the selected location is
displayed in the preview on the right side of
the screen.INFO:
By selecting “By Distance”, the list can be sorted
by the nearest distance.6. The selected destination is displayed at the
center of the map. Select “Start” after con-
firming the location of the displayed
destination.
The system sets the destination to the se-
lected location and starts calculating a
route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
NDE0070NDE0071NDE0072
Setting a destination4-31

SETTING A POINT ON THE MAP
A location touched on the map can be set as the
destination to which the system calculates a
route.
1. Scroll the map, place the cross pointer over
the preferred location, and select “Map
Menu”.
INFO:
●Adjust the map scale to search for a location
more effectively.
●The point on the blinking road where the cen-
ter of the cross pointer is located can be set
as a destination.2. Select “New Dest.”.
INFO:
For the items except for “New Dest.”, refer to
“Map menu screen”.
“SCROLLED LOCATION MAP
SCREEN” (page 2-13)
NDE0073NDE0074
4-32Setting a destination

3. The system sets the destination to the se-
lected location and starts calculating a
route.INFO:
If a point on a freeway is set as the destination, a
confirmation message is displayed.It is possible to delete a destination and all way-
points that have already been set.
1. Press DEST.
2. Select “Delete Destination”.
NDE0075NDE0076NDE0078
DELETE DESTINATION
Setting a destination4-33