2010 NISSAN ALTIMA COUPE Navigation Manual

●The position and direction of the vehicle icon
may be misaligned depending on the external
conditions and environment.
●If the vehicle icon is misaligned, drive for a
while in a location where the GPS signals can
be received. This may correct the position of
the vehicle icon.
“Vehicle Icon” (page 11-4)
1. Select “Others”.
2. Select “Adjust Current Location”. The cur-
rent location map screen is displayed.3. Adjust the position of the vehicle icon. After
adjusting the position of the vehicle icon,
touch “OK” key.
NSE0025NSE0026
8-14Other settings

4. Adjust the direction of the vehicle icon. After
adjusting the direction of the vehicle icon,
touch “OK” key.5. A message is displayed, and the adjusted
vehicle location is stored.
DELETE STORED ITEMS
Delete stored item from setting screen.
Basic operation
1. Select “Navigation”.
2. Select the preferred item that you want to
delete.
Available items
●“Deletes Stored Information”:
Delete the stored location and home.
●“Delete All Previous Destinations”:
Delete all previous destinations.
●“Delete Previous Start Point”:
Delete all previous start points.
NSE0027NSE0028NSE0029
Other settings8-15

RESET ALL NAVIGATION SETTINGS
TO DEFAULT
This restores various settings (display, volume
level, etc.) to the default settings.
INFO:
The memory contents, such as the stored
locations, will not be deleted.
1. Select “Navigation”.
2. Select “Reset All Navigation Settings to
Default”.3. A confirmation message is displayed. Con-
firm the contents of the message, select
“Yes”.
NSE0030NSE0031
8-16Other settings

This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume) , the voice guide function and the beep
function.
BASIC OPERATION
1. Press SETTING.
2. Select “Volume & Beeps”.
3. Select the preferred adjustment item.
4. Touch the “+” or “-” key.
5. After setting, touch “Back” key.
6. Touch “Back” to return to the previous
screen. Press MAP to return to the current
location map screen.
Setting items
●“Audio Volume”:
Adjust the volume level of the audio system
by touching “+” or “”.●“Guidance Volume”:
Adjust the volume level of voice guidance
by touching “+” or “”.
●“Ringtone”:
Adjust the volume level of the ringtone by
touching “+” or “”.
●“Incoming Call”:
Adjust the incoming call volume by touching
“+” or “-”.
●“Outgoing Call”:
Adjust the outgoing call volume by touching
“+” or “”.
●“Switch Beeps”:
Select to toggle the beep function between
on and off. The indicator light illuminates
when the beep function is set to on. The
beep sounds when pushing and holding a
button or when a prohibited operation is
performed.
●“Guidance Voice”:
Select to toggle the voice guidance func-
tion between on and off. The indicator light
illuminates when the voice guidance func-
tion is set to on.
NSE0032
VOLUME ADJUSTMENT
Other settings8-17

INFO:
For more details about “Ringtone”, “Incoming
Call” and “Outgoing Call”, refer to the vehicle
Owner’s Manual.This changes the clock settings.BASIC OPERATION
1. Press SETTING.
2. Select “Clock”.
3. Select the preferred adjustment item.
4. Use the touch screen to adjust to the pre-
ferred setting.
5. After setting, touch “Back” key to apply the
setting.
6. Press MAP to return to the current location
map screen.
Setting items
●“On-screen Clock”:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates
when the clock display is set to on.
●“Clock Format (24h)”:
Select the clock format between 12-hour
and 24-hour times. The indicator light illumi-
nates when the clock is set to the 24- hour
format.●“Offset (hour)”:
Use the on-screen keys to adjust the offset
value (between12 and +12) .
●“Offset (min)”:
Use the on-screen keys to adjust the offset
value (between59 and +59) .
●“Daylight Savings Time”:
Select to toggle the daylight savings time
setting between on and off. The indicator
light illuminates when the daylight savings
time setting is set to on
●“Time Zone”:
Select an appropriate time zone from the list
that appears when this item is highlighted.
– Pacific
– Mountain
– Central
– Eastern
– Atlantic
– Newfoundland
– Hawaii
– Alaska
CLOCK SETTINGS
8-18Other settings

This changes the language and measurement
unit used in the system.
LANGUAGE SETTINGS
1. Press SETTING.
2. Select “Others”.
3. Select “Language & Units”.4. Select “Select Language”.
LNV0601NSE0035
LANGUAGE AND UNIT SETTINGS
Other settings8-19

5. Select the preferred setting item. The indi-
cator light of the selected item illuminates.
Available languages:
– “English”:
– “Francais”:
– “Español”:
NOTE:
Do not change the ignition switch position
while changing the language. Doing so
may cause a system malfunction.
UNIT SETTINGS
1. Press SETTING.
2. Select “Others”.
3. Select “Language & Units”.4. Select “Select Units”.
NSE0036LNV0601NSE0037
8-20Other settings

5. Select the preferred unit. The indicator of
the selected unit illuminates.
Available units:
– US:
mile, MPH, ºF, MPG
– Metric:
km, km/h, ºC, L/100 km
6. Press MAP to return to the current location
map screen.
NSE0038
Other settings8-21