2010 MERCEDES-BENZ E-Class COUPE Comand Manual

RMicrosoft ®
is a registered trademark of
Microsoft Corporation in the United States
and other countries
R SIRIUS and related marks are trademarks
of SIRIUS Satellite Radio Inc.
R Windows media ®
is a registered trademark
of Microsoft Corporation in the United
States and other countries
You will find the following symbols in these
operating instructions:GWarning!
Warning notices draw your attention to
hazards that may endanger your health or life,
or the health or life of others.
! Highlights hazards that may result in
damage to your COMAND.
i Helpful hints or further information you
may find useful.
XThis symbol points to
instructions for you to follow. A
number of these symbols
appearing in succession
indicates a multiple-step
procedure.OThe continuation symbol marks
an interrupted procedure which
will be continued on the next
page.( Y page 11)This symbol tells you where to
look for further information on
this subject.DisplayMessages, menu items or soft
key names appearing in the
COMAND color display are
printed in the style shown here.Operating SafetyGWarning
Any alterations of electronic components or
software can cause malfunctions.
Radio, satellite radio, amplifier, DVD changer,
navigation module, telephone and Voice
Control systems are interconnected.
Therefore, if one of the components is not
operational, or has not been removed/
replaced properly, the function of other
components could be impaired.
Such conditions might seriously impair the
operating safety of your vehicle.
We recommend to have any service work on
electronic components carried out by an
authorized Mercedes-Benz Center.
GWarning
In order to avoid distraction which could lead
to an accident, the driver should enter system
settings while the vehicle is at a standstill, and
operate the system only when permitted by
road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m) every
second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we
encourage the driver to stop the vehicle in a
safe place before answering or placing a call,
or consulting the COMAND screen to read
navigational maps, instructions, or
downloaded information.
GWarning
While the navigation system provides
directional assistance, the driver must remain
focused on safe driving behavior, especially
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
Introduction15Z

The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. Their
observance always remains in the driver’s
personal responsibility. DVD maps do not
cover all areas nor all routes within an area.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.GWarning
Change or modification not expressly
approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
! Note: This equipment has been tested
and found to comply with the limits for a
Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
GWarning
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in
Supplement C to OET65.
This equipment has very low levels of RF
energy that is deemed to comply without
maximum permissive exposure evaluation
(MPE). But it is desirable that it should be
installed and operated with at least 8 inches
(20 cm) and more between the radiator and a
person's body (excluding extremities: hands,
wrists, feet and legs.)16Introduction

COMAND Control System ...................18
Multifunction Steering Wheel ............25
Operating COMAND ............................30
Basic Functions of COMAND ..............3417At a Glance

COMAND Control System
E-Class illustrated
FunctionPage1COMAND display182COMAND control unit with
DVD changer
20
3COMAND controller23
Vehicle Equipment
i This Operator’s Manual describes all
features, standard or optional, potentially
available for your vehicle at the time of
purchase. Please be aware that your
vehicle might not be equipped with all
features described in this manual.
Components of COMAND
COMAND comprises:
R the COMAND display
R the COMAND control unit with DVD
changer
R the COMAND controller with the Back and
Clear button
You can use COMAND to operate the
following main functions:
R the navigation system
R the audio function with the radio, SatRadio,
disc (CD audio, DVD audio or MP3 mode),
PCMCIA memory card (MP3 mode), Music
Register and Audio Aux modes
R the telephone and the address book
function
R DVD Video
R systems settings
You can call up the main functions:
R using the corresponding function buttons
R using the main function line in the
COMAND display
COMAND Display
i Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. Should
the display need cleaning, use a mild
cleaning agent and a soft, antistatic, lint-
free cloth. Commercially available alcohol
and ammonia-free TFT or LCD cleaners are
recommended.
The COMAND display shows the function
currently selected and its associated menus.
The COMAND display is divided into several
areas.
The radio display is shown in the example.
18COMAND Control SystemAt a Glance

Example: Audio main function display
1Status line2Main function line3Main area4Submenu line
Status line 1 displays the time and the
current telephone status.
With the main function line 2 you can select
the main function.
Select the function with the COMAND
controller ( Y page 23).
In the example, the audio main function is set
to radio mode and the main area 3 is active.
i The arrangement of the menus can vary,
depending on the equipment. Normally, the
menus for the full equipment version are
shown in this manual.
Menu Overview
Having selected a main function, you will find
the submenu line at the bottom edge of the
COMAND display.
If one of the main functions such as
Navigation, Audio, Video or Phone is currently
selected, additional menus are available from
the main function line ( Y page 19).
This is indicated by a small triangle behind the
main function label.
1Triangle indicating an additional menuNaviAudioPhoneVideoModeFM/AM RadioPhoneDVD VideoMap OrientationSatRadioAddress bookVideo AuxPOI Symbols On
MapDisc (CD audio,
DVD audio, MP3
mode)Traffic Information
On MapMemory card (MP3
mode)Text Information
On MapMusic RegisterÇ Topographic
MapMedia InterfaceCOMAND Control System19At a GlanceZ

NaviAudioPhoneVideoÇ Highway
informationRearÇ Read Traffic
Messages
AutomaticallyAUXÇ Audio FadeoutBlock AreaSIRIUS ServiceYou can determine basic settings for the map
display, route calculation and route guidance
functions in Navigation.
i You can call up functions such as
destination entry and the destination
memory at the bottom of the COMAND
display in the Navigation Submenu line.
In the Audio main function, you can switch
modes in the audio menu.
In the Phone main function, you can choose
between the telephone mode and the address
book.
In the Video main function, you can choose
between the DVD mode and the Video Aux
mode.COMAND Control Unit
The COMAND control unit allows you to:
R switch COMAND on/off
R adjust the volume
R select the main function/mode directly
R enter telephone numbers and accept,
reject, initiate and end calls
R load and eject CDs/DVDs or a PCMCIA
memory card20COMAND Control SystemAt a Glance

FunctionPage1$Switch to radio mode123Switch wavebands2hSwitch toLast selected medium in
DVD changer139, 158Memory Card139Music Register144Media Interface1473VLoad/eject button134,1364Disc slotCD/DVD loading134CD/DVD ejection136Update the map software485ESelect stations using the
station search function
125
Fast reverse142Select the previous track141FunctionPage6qSwitch COMAND on/off34Adjust the volume347FSelect stations using the
station search function
125
Fast forward142Select the next track14182Clear button for functionsTelephone number entry109Delete a digit or entire entry9Number keypadSelect stations via station
presets
125
Store stations manually125Telephone number entry109DTMF tone transmission111aPCMCIA memory card slot136bEject button for the
PCMCIA memory card
137
COMAND Control System21At a GlanceZ

FunctionPagec6Accept a call109Dial a call109Redial110d~Reject a call109End an active call111Reject a waiting call111eWOpen the system menu40FunctionPagef8Switch the sound on/off34Mute navigation
announcements
34
g%Switch to telephone mode102hØSwitch to navigation mode5322COMAND Control SystemAt a Glance