2010 Lexus IS250C Owner's Manual

344
3-6. Using the storage features
10_IS250C/350C_URear
Open the front lid.
Open the rear lid.
■Cup holder insert
Front (slide type)
Rear
Remove the cup holder insert holding the
base part.
Cup holder insert may be removed for clean-
ing.
Cup holders

345
3-6. Using the storage features
3
Interior features
10_IS250C/350C_U
CAUTION
■Items unsuitable for the cup holder (front press-in type, rear)
Do not place anything other than cups or beverage cans in the cup holders. Even
when the lid is closed, items must not be stored in the cup holders.
Other items may be thrown out of the holders in the event of an accident or sudden
braking and cause injury.
■To prevent burns
Put a lid on containers with hot liquids inside.
■When not in use
Keep the cup holders closed.
Injuries may result in the event of an accident or sudden braking.
Cup holders

346
10_IS250C/350C_U
3-7. Other interior features
Sun visors
Forward position:
Flip down.
Side position:
Flip down, unhook, and swing
to the side.

347
3-7. Other interior features
3
Interior features
10_IS250C/350C_U
Vanity mirror
Open the cover to use.
The light turns on when the
cover is opened.

348
3-7. Other interior features
10_IS250C/350C_U
Clock
■The clock is displayed when
The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Adjusts the hour.
Adjusts the minutes.
Rounds to the nearest hour.
*
*: e.g. 1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00

349
3-7. Other interior features
3
Interior features
10_IS250C/350C_U
Satellite switches
The satellite switches can be used to change the settings of various fea-
tures. Settings are shown on the multi-information display.
■Operating the satellite switches
Bring up the satellite switch
mode on the multi-information
display.
Press “<”, “>” or the “ON/OFF”
button.
Select the item whose setting is
to be changed.
Press “<” or “>” to display the
item whose setting is to be
changed.
STEP1
STEP2

350
3-7. Other interior features
10_IS250C/350C_U
Change the settings.
Press the “ON/OFF” button to
change the settings (e.g. on/off).
■Items that can be set us ing the satellite switches
STEP3STEP3
Intuitive parking assist ( →P. 198) on/off (if
equipped)
Tire pressure warning system initialization
(→ P. 4 0 7 )
ID code selection for tire inflation pressure warn-
ing system ( →P. 4 0 9 )
AFS (Adaptive Front-lighting System) ( →P. 1 74 )
on/off (if equipped)
Vehicle speed indicator on/off and speed setting
(→ P. 1 6 1 )
Tacho indicator on/off and engine speed (rpm)
setting ( →P. 1 6 1 )

351
3-7. Other interior features
3
Interior features
10_IS250C/350C_U
■Changing the settings
Each item is displayed and its setting can be changed only in the following condi-
tions:
●Intuitive parking assist: When the “ENGINE START STOP” switch is in IGNI-
TION ON mode.
●Items other than the above: When the “ENGINE START STOP” switch is in
IGNITION ON mode and the vehicle is stopped.
■Display
The display will return to the original display if the satellite switches are not oper-
ated for an extended period.
Even if the display is in satellite switch mode, it will switch in the event of a warning
or when the radar cruise control (if equipped) is used. If this occurs, press any of the
satellite switches or “DISP” switch on the steering wheel to return the display to sat-
ellite switch mode.