Page 1028 of 3039
3. NOTE: Tighten the bolts in the indicated sequence.
Torque: 12 Nm
4. NOTE: Tighten the bolts in the indicated sequence.
Torque: 12 Nm
Page 1030 of 3039
7.
8.
9.
10. NOTE: Tighten the bolts in the indicated sequence.
Torque: 12 Nm
Torque: 12 Nm
Torque: 12 Nm
Torque: 12 Nm
Page 1040 of 3039
2. Torque: 12 Nm 3.
Install the special tool to each Camshaft.
Special Tool(s): 303-1452 Torque: 10 Nm
4.
Carefully rotate the camshafts if the position is not
as shown.
Page 1044 of 3039
10.
11. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.
CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm
Page 1047 of 3039
15.
16. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.
CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm
Page 1049 of 3039
20.
21.
Install the special tool.
Special Tool(s): 303-1482
CAUTIONS:
Apply the torque to the end of the special tool.
Make sure that the torque wrench is aligned with the
special tool as illustrated in the graphic.
Install the torque wrench to the special tool.
Torque: 35 Nm
Page 1050 of 3039
22.
23. CAUTION: Make sure that the torque wrench does not
move whilst tightening the VVT bolts.
NOTE: Make sure to tighten the exhaust VVT unit
bolts first.
Torque: 32 Nm Special Tool(s): 303-1482
Install the oil suction tube.
Torque: 10 Nm
Page 1051 of 3039
24.
25.
Install the special tool.
Special Tool(s): 303-1482
CAUTIONS:
Apply the torque to the end of the special tool.
Make sure that the torque wrench is aligned with the
special tool as illustrated in the graphic.
Install the torque wrench to the special tool.
Torque: 35 Nm www.JagDocs.com
