2010 CHEVROLET EXPRESS Owner's Manual

Page 201 of 440

CHEVROLET EXPRESS 2010  Owners Manual STARTING DISABLED SERVICE
THROTTLE
This message displays if the starting of the engine is
disabled due to the electronic throttle control system.
Have your vehicle serviced by your dealer/retailer
imm

Page 202 of 440

CHEVROLET EXPRESS 2010  Owners Manual TRANSMISSION HOT IDLE ENGINE
Notice:If you drive your vehicle while the
transmission �uid is overheating and the
transmission temperature warning is displayed on
the instrument panel cluster and/or DI

Page 203 of 440

CHEVROLET EXPRESS 2010  Owners Manual The customization preferences are automatically
recalled.
To change customization preferences, use the following
procedure.
Entering the Feature Settings Menu
1. Turn the ignition on and place the veh

Page 204 of 440

CHEVROLET EXPRESS 2010  Owners Manual AUTO DOOR LOCK
This feature allows you to select when the vehicle’s
doors will automatically lock. SeeProgrammable
Automatic Door Locks on page 3-10for more
information.
Press the customization butt

Page 205 of 440

CHEVROLET EXPRESS 2010  Owners Manual REMOTE DOOR LOCK
This feature allows you to select the type of feedback
you will receive when locking the vehicle with the Remote
Keyless Entry (RKE) transmitter. You will not receive
feedback when lo

Page 206 of 440

CHEVROLET EXPRESS 2010  Owners Manual DELAY DOOR LOCK
This feature allows you to select whether or not the
locking of the vehicle’s doors will be delayed. When
locking the doors with the power door lock switch and a
door is open, this f

Page 207 of 440

CHEVROLET EXPRESS 2010  Owners Manual 2 MINUTES:The exterior lamps will stay on for
two minutes.
NO CHANGE:No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the

Page 208 of 440

CHEVROLET EXPRESS 2010  Owners Manual NO CHANGE:No change will be made to this feature.
The current setting will remain.
There is no default for chime volume. The volume will
stay at the last known setting.
To select a setting, press the