2010 AUDI A5 CABRIOLET belt

Child Safety ------------------------"'--l'ff'II
& WARNING (c on tinued )
• Always make sure the seat backrest to which the child re stra int
is installed is in an upright position and securely latched into place
and cannot fold forward . Otherwise , the seat back with the child
safety seat atta ched to it could fly forward in the e vent of an acci­
dent or other emergency situation.
• Always read and heed all WARNINGS whenever u sing a child
restrained in a vehicle is being used~
page 222. Special precau ­
tions apply when installing a child safety seat on the front passenger seat~
page 202, "Child restra ints on the front seat -
s ome important things to know ".•
Deactivating the convertible locking
retractor
The convert ible locking retractor for child restraints will
be dea ctivat ed aut om at ic ally when the belt i s woun d all
th e way bac k in to t he retr actor .
- Press the re d but to n o n th e sa fety belt buckle. T he b elt
to ng ue wi ll pop out of th e buckle .
- Guide the safety belt all t he way back in to its stowed posi-
tion.
Always le t the safety bel t retract completely into i ts stowe d position .
Th e safety belt can now be used as an ord inary safe ty be lt withou t the
convertible locking ret ractor fo r ch ild rest raints .
If the convertib le locking retractor should be activated inadvertently,
t he s afety bel t m ust be unfastened and guide d com plete ly b ack i nto
its stowed position to deactivate this feature. If the convertible
lo ck ing r etr acto r is no t deact ivated, the sa fe ty belt w ill gradu ally
become t ighter and uncomfo rtable to wear .
Controls and equip­
ment Safety first Vehicle operation
& WARNING
Improperly installed child safety seats increase the risk of serious
personal injury and death in a colli
sion.
• Never unfasten the safety belt to deactivate the convertible
locking retractor for child restraints while the vehicle i s moving.
You would not be restrained and could be seriously injured in an
accident.
• Always read and heed all WARNINGS whenever using a child
re strained in a vehicle i s being used~
page 222. Special precau­
tions apply when installing a child safety seat on the front
pas senger seat~
page 202, "Child restraints on the front seat -
some important things to know ".•
LATCH Lower anchorages and
tethers for children
Child Restraint System anchors and how
are they related to child safety
To provide a simp le r and more practicable way to attac h the child
restra int on the ve hicle sea t, Fe d era l regu lations require spec ia l
lower anchorages in veh icles and devices on new child restra ints to
attach to t he vehicle anc ho rages.
Th e combin ation of the te ther anchorages and t he lower an chorages
is now generally called the
LATCH system for " Lower Anchorages and
T ether s fo r Chi ldren. "
Forward-fac ing ch ild restra ints manufactured after September 1,
1 999, are required by U .S . federa l reg ulations to comp ly with new
child head movement per formanc e requi reme nts . These new perfor­
mance requirements ma ke a tether necessary on most new child
sea ts.
Vehicle care Do-it-yourself service Technical data

Description
The lower anchorage positions are marked for quick
locating.
Fig. 210 Rear seat­
backs: locator buttons
for lower anchorages
Fig. 211 Rear seats:
lower anchorage
bracket locations
Attachment locator markers for lower anchorages
Circular locator buttons on the rear seatback indicate the lower
anchorage locations on the rear seating positions~ fig . 210.
Lower anchorages
The lower anchorage attachment points are located between the rear
seatback and rear seat cushion~ fig . 211.
Lower anchorages secure the child restraint in the seat without using
the vehicle's safety be lts. Anchorages provide a secure and easy-to-
Safety first Vehicle OP-eration
Child Safety
use attachment and m inimize the poss ibility of improper child
restra int ins tallat ion.
All child restra ints man ufactured after September 1, 2002, must
have lower anchorage attachments for the
LATCH system .
Remember that the lowe r anchorage points are only intended for
installation and attachment of child restraints specifically certified
for use wi th
LATCH lower anchorages . Child restraints that are not
equipped with the Lower anchorage attachments can still be installed
in compliance with the child restraint man ufact urer's instructions on
using vehicle safety be lts.
& WARNING
Improper use of LATCH lower anchorages can cause serious
personal injury in an accident.
• Always carefully follow the child restraints manufacturer 's
instructions for proper installation of the child restraint and
proper use of the lower anchorages or safety belts in your vehicle.
• Never secure or attach any luggage or other items to the
LATCH
lower anchorages.
• Always read and heed the important information about child
restraints in this chapter and WARNINGS~
page 222, "Child
Safety". •
Vehicle care Do-it-yourselt service iTechnical data

lffll.___C_ h_ il_d _ S_a _ f_ e _ t--= y '------------------------------------------------
Installing a child restraint with LATCH
lower anchorages
Whenever you install a child restraint always follow the
child restraint manufacturer's instructions.
Mounting
,._
"' 0 0 tL
18
Fig. 212 Lower
anchorages: proper
mounting
- Make sure the seat back of the rear seat bench is in the
upright position and securely latched in place.
- Attach both hook-on connectors with the spring catch release on the child safety seat onto the LATCH lower
anchorage so that the connectors lock into place
~ fig . 212.
- Pull on the connector attachments to make sure they are
properly attached to the LATCH lower anchorage.
- Pull straps tight following the child restraint manufac­
turer's instructions.
Releasing
- Loosen the tension on the straps following the child
restraint manufacturer's instructions. -
Depress the spring catches to release the anchorage hooks
from the lower anchorages.
Remember: Use tether straps to help keep the child restraint firmly
in place.
& WARNING
Improper use of the LATCH system can increase the risk of serious
personal injury and death in an accident.
• These anchors were developed only for child safety seats using
the "LATCH" system.
• Never attach other child safety seats, belts or other objects to
these anchors.
• Always make sure that you hear a click when latching the seat
in place. If you do not hear a click the seat is not secure and could
fly forward and hit the interior of the vehicle, or be ejected from
the vehicle.
& WARNING
Improper installation of child restraints will increase the risk of
injury in an accident.
• Always follow the child restraint system manufacturer's
instructions for proper installation of the child restraint system
and proper use of tether straps as well as the lower anchorages or
safety belts in your vehicle.
• Always read and heed the important information and WARN­
INGS about child safety and the installation of child restraint
systems
=> page 222, "Child Safety". •

___________________________________________ C_ h_il _d _ S_a _f _e _t ~ y __ _
Using tether straps on rearward -facing
child restraints
Currently, few rearward-facing child rest raint systems come w ith a
t e ther. Please re ad and heed the c hild restrain t system manu fac­
t u rer 's instructions car efully to determine how to prope rly insta ll the
t ether.
& WARNING
A child in a rearward-facing child safety seat installed on the front
passenger seat will be seriously injured and can be killed if the
front airbag inflates - even with an Advanced Airbag System.
• The inflating airbag will hit the child safety seat or infant
c arrier with great force and will smash the child safety seat and
child against the backrest, center armrest , or door .
• A tight tether or other strap on a rearward -facing child
restraint attached to the front passenger seat can put too much
pressure on the weight-mat in the seat and register a heavier
weight in the Advanced Airbag System. The heavier weight regi s­
tered can make the system work as though an adult were on the seat and deploy the Advanced A irbag when it must be suppressed
c ausing serious or even fatal injury to the child .
• If you must install a rearward facing child safety seat on the
front passenger seat becau se of exceptional circum stances and
the PASSENGER AIR BAG OFF light does not come on and stay on ,
immediately install the rearward-facing child safety seat in a rear
seating position and have the airbag system inspected by your
authorized Audi dealer. •
Controls and equip­ ment Safety first Vehicle operation
Additional Information
Sources of information about child
restraints and their use
There are a number of sou rces of additional informat ion abo ut child
restr aint sele ct io n, inst all ati on and use:
NH TSA adv ises t hat t he best ch ild safety seat is the one that f its your
child and fits in yo ur vehicle, a nd that yo u wi ll use cor rectly and
co nsist en tly .
Try before you buy!
U.S National Highway Traffic Safety Administration
T el. : 1-888 -327 -4236 (T TY : 1-800 -424-9153)
www .nhtsa .gov
National SAFE KIDS Campaign
Te l.: (202) 662-0600
www. safe kids .o rg
Safety BeltSafe U .S.A
T el. : (800) 745 -SAFE ( English)
Te l.: (800) 747-SA NO (Span ish)
www .carseat .org
Transport Canada Information Centre
Te l.: 1 (800) 333-0371 or call 1 (613) 998 -8616 if you are in the
O tt awa area
www .tc .gc.ca/ roadsafety
Audi Customer CARE
Te l.: (800) 822-2834 •
Vehicle care Do-it-yourself service Technical data

Intelligent technology
~----------------------------------------------
Intelligent technology
Notice about data recorded by
vehicle control modu Les
Your vehicle is not equipped with an Event Data Recorder (EDR),
installed by some manufacturers for the express purpose of
capturing data for retrieval after an accident or crash event. EDR's are
sometimes called "crash recorders".
Some state laws restrict the retrieval or downloading of data stored
by ED R's that were installed in a vehicle for the express purpose of
retrieving data after an accident or crash event without the owner's
consent.
Although your vehicle is not equipped with an EDR, it is equipped with
a number of e lectronic control modules for various vehicle systems
such as, for example, eng ine function, emission control, as well as for
the airbags and safety belts.
These electronic control modules also record vehicle-related data
during normal vehicle operation for diagnostic and repair purposes .
The recording capacity of the electronic control modu les is limited to
data (no sound is recorded) and only a sma ll amount of data is actu­
ally recorded over a very limited period of time and stored when a
system fault or other condition is sensed by a control unit. Some of
the data then stored may relate to vehicle speed, direction, braking
as well as restraint system use and performance in the event of a
crash or other condition. Stored data can only be read and down­
loaded with special equipment .•
Electronic Stabilization Program
(ESP}
Ce-ieral lnforrrc:t~on
The ESP improves the vehicle stability.
Fig. 213 ESP button
Fig. 214 Center
console with ESP
switch
ESP is designed to he lp you maintain vehicle control in situations
where the car approaches the limits of "grip", especially when accel­
erating and cornering. ESP reduces the risk of skidding and improves
stability under all road conditions.

-~_C_ le_ a_n_ i_ n_ g=- a_ n_d___. p_ ro_ t_e _c_ t_ i_o _n ___________________________________________ _
consider if children, animals or other factors might prove to be partic­
ularly hard on the leather.
By contrast, leather types that are covered by a colored finish layer
are more durable. This has a positive effect on the leather's resistance
to wear and soiling in daily use . On the other hand, the typical charac­
teristics of natural leather are barely or not apparent . However, this
does not mean that the leather itself is of inf erior quality.
Care and handling
Because of the exclusive nature of the types of leather that Audi uses
and the ir un iqu e properties (such as sensitivity to oils, grease, so iling,
etc.), you will need to be somewhat careful with these leathers, and
a certain type of care is required. For example, dark clothing mate­
ria ls can disco lor leather seats (especially if such clothing is damp and
was not dyed correctly). Dust and dirt particles in pores, folds, and
seams can have an abrasive effect and can damage the leathe r
surface as well as weaken seams .
Th e leather should be cleaned regu larly as needed. After having been
used for a relatively long time, your leather seats will acquire a rich
aged finish. This is a characteristic of natural leather and a sign of
true quality.
In order to ma intain the value of this natural product over the life of
your vehicle, you should fo llow the recommendations below:
0 Note
• To keep your leather from bleaching out, do not allow it to be
exposed to bright sunlight for long periods of time . If you have to
leave the vehicle parked outside for long periods, cover the leather to
protect it from direct exposure to sunlight.
• Sharp objects on clothing, such as zippers, rivets or sharp pieces
on belts can leave pe rmanent scratches or scrape marks on the
surface of the leather.
W Tips
• After each time you clean the leathe r and at regular intervals, use
a leather preservative cream that contains UV-blockers and that
wor ks into the leather. This cream will nourish and moisturize the
leather, helping it to breathe and s tay supple . It also helps to build up
a protect ive coating on the surface.
• Clean the leather every 2 -3 months, and clean any areas that get
soiled.
• Remove fresh marks made by ballpoint pens, ink, lipstick , shoe
polish, etc. as soon as poss ible.
• Preserve the color of the leather as needed by using a special
colored leather care cream to touch up areas of uneven color .•
Ap plies to veh icles : with nat ural lea ther
Cleaning and caring for leather upholstery
and trim
Natural leather requires special care and attention.
Normal cleaning
-Clean soiled areas with a slightly moistened cotton or
woolen cloth.
More stubborn dirt
- More stubborn dirt can be removed using a cloth satu­
rated with a mild soap solution (2 tablespoons mild liquid
soap).
- Never allow the soap solution to satu rate the leather, and
make certain that no water soaks into the seams .
- Wipe off the soap solution with a soft, dry cloth. .,_

-Cleaning and protection pn, _____________________ _
0 Note
• Never use chemical so lvents (e.g. lig hte r fluid, turpentine), waxes,
shoe po lish or simi lar p roducts on Alca ntara ® surfaces .
• To avo id damage, have stubborn stains removed by a commerc ia l
cleaning specialist .
• Do not use brushes, stiff sponges or sim ila rly abrasive cleaning
aids. •
Safety belts
Only well-maintain ed safety belts work reliably when
needed .
-Keep be lts clea n.
- For cleani ng, use a mi ld soap and wa ter solution. Let be lts
d ry thoroug hly and away fro m dir ect sun light.
- Do not allow in ertia re el s afety b elts to ret ra ct bef ore t hey
are comp le tel y dry .
- C heck the condi tion of y our safety bel ts
regularly .
Heavily soiled safety belts may no t re tract p roper ly .
& WARNING
Damaged safety belts can break in a crash.
• Anything that might damage your safety belts could mean
that you and your passengers would not be adequately protected
in an a ccident.
• Safety belt performance depends on correct installation. Never
remove belts from the vehicle to clean them.
• Do not use chemical cleaning agents , bleach or dyes. They have
corro sive properties which weaken the webbing .
& WARNING (c on tinued )
• When cleaning your safety belts , inspect them for damage. If
you discover damage , see your authorized Audi d ealer .
• Always read and heed all WARNINGS and other info rmation
=:> page 260 . •
Engine compartment
B e especi ally care ful w hen cleaning the engine comp art­
men t.
Always switch off the ignition before cleaning the engine=>& .
Plenum panel
Remove leaves from the plenum panel in front of the windsh ield
un der th e eng ine hoo d. This p revents the wate r drain holes from
becom ing b locked, and it prevents debris from entering the ve hicle
inter io r thr ough the heat ing and ventila tion ducts.
Corrosion protection
Th e engine compartment and tran smission have been cor rosion­
protected at the factory.
Goo d an ti- cor ros ion treatmen t is very impo rtan t, pa rtic ula rly in the
w inte r. If the vehicle is frequently driven on sa lt treated roads, t he
entire eng ine compa rtment and plenum pane l sho uld be thoroug hly
cleaned at the end of w inter and retreated to prevent sa lt damage . At
the same time, the underside of the vehicle should be washed as we ll.
If the eng ine co m par tment is clea ned at any time wi th grease
removing solutions
2l, or if you have the engine washed, the anti­
c o rrosion treatment is a lmost always remove d as we ll.
It is the refore
essential to have a long-last ing corrosion protect io n reapplied to all
s u rfaces, seams, joints and components in the engine compartmen t. ~
2
l Use on ly the co rrect clean ing so lut ions . Neve r use gaso line or d iese l fuel.

_____________________________________________ C_h _ e_ c_ k_in --= g'-- a_n _d_ f_i _ll _i_n -=g ::;__ ____.1111
& WARNING (co ntinued )
-Alway s use extreme caution to prevent clothing , jewelry , or
long hair from getting caught in the radiator fan, V-belts or
other moving parts, or from contacting hot parts. Tie back hair
before start ing , and do not wear clothing that will hang or
d roop into the engine.
• Minimize expo sure to emis sion and chemical hazards~& .
& WARNING
California Proposition 65 Warning:
• Engine exhaust, some of it s constituents, and certain vehicle
components contain or emit chemicals known to the State of Cali ­
fornia to cause can cer and birth defects and reproductive harm . In
addition, certain fluids contained in vehicles and ce rtain products
of component wear contain or emit chemicals known to the State
of California to cause cancer and birth defects or othe r reproduc­
tive harm.
• Battery posts, terminals and related accessories contain lead
and lead compounds, chemicals known to the State of California
to cause cancer and reproductive harms . Wash hands after
handling.
0 Note
When adding fluids , a lways make sure that they are poured into the
proper co nta iner o r filler opening, otherwise serio us damage to
vehicle systems will occur.
<£> For the sake of the environment
To detect leaks in time, inspect the vehicle floor pan from underneath
reg ula rly . If yo u see spot s from o il or o ther vehicle fluid s, have your
vehicle inspected by an authorized Aud i dea ler. •
Vehicle OP-eration
Engine compartment
These are the most i mportan t it ems that you can check.
Fig . 220 Typ ical layout for c ontainer s and engine oil filler cap
(D Jump start point( +) under a cover ........ .. .. .. .. . 293, 334
@ Brake fluid reservo ir ( ) . . . . . . . . . . . . . . . . . . . . . . . . 290
@ Engine oil f iller c ap
('1::r. ) . . . . . . . . . . . . . . . . . . . . . . . . 285
© Coolant ex pansion ta nk (-L ) . . . . . . . . . . . . . . . . . . . . . 28 7
© Jump start point( -) w ith he x head screw ..... ... .. . 293 , 33 4
© Winds hield/head light washer container (0 ) . . . . . . . . 295
(j) Power steering reservoir . . . . . . . . . . . . . . . . . . . . . . . . 246
Th e posi tion of the eng ine o il filling hole ~ fig. 220 (i tem @) can
differ depending on the eng ine des ign . ..,.
Vehicle care Do-it-yourselt service iTechnical data