Page 33 of 119
!
!
35
Manual control
Depending on your requirements, you
can make a different selection from that
offered by the system by changing a
setting. The other functions will still be
controlled automatically.
Press the "AUTO" button to return
to fully automatic operation.
4. Air conditioning On/Off
5. Air distribution adjustment 6 . A i r fl o w a d j u s t m e n t
7. Air intake/Air recirculation
Deactivation of the system
Avoid prolonged operation in inte-
rior air recirculation mode (risk of
condensation and of deterioration
of the air quality).
Avoid driving for too long with the
air conditioning deactivated.
Press this button to switch
the air conditioning off. The
"ECO" symbol is displayed.
Press this button several
times in succession to direct
t h e a i r fl o w i n t u r n t o w a r d s :
Press the "-" but-
ton to reduce the air
fl o w .
Press the "+" button
to increase the air
fl o w .
Press this button to recircu-
late the interior air. The air
recirculation symbol is dis-
played.
Press the "OFF" button.
This action deactivates all of the func-
tions of the air conditioning system.
The temperature is no longer main-
tained at a comfortable level. However,
a s l i g h t fl o w o f a i r , d u e t o t h e m o v e m e n t
of the vehicle, can still be felt.
Press the "OFF" , "AUTO" or "visi-
bility" button again to reactivate the
system with the values which were
set before it was deactivated.
Switching the system off may result in some
discomfort (humidity, condensation).
Press the button again to return
to automatic operation of the air
c o n d i t i o n i n g . T h e s y m b o l " A/C " i s
displayed.
- the windscreen and side windows (demisting or defrosting),
- the windscreen, the side windows and the footwells,
- the footwells,
- the central vents, the side vents and the footwells,
- the central and side vents. Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.
Choose this position for rapid cooling of
the passenger compartment.
As soon as possible, press this button
again to permit the intake of exterior
air and prevent condensation.
Page 34 of 119
Page 35 of 119
!i
37
1 - F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Lift the control and slide the seat forwards
or backwards.
2 - Height adjustment
Pull the handle upwards.
Remove your weight from the seat to
raise, or press on the seat to lower.
3 - Access to the rear seats
(3-door), A or B according to model
A. P l a c e y o u r fi n g e r s i n o n e o f t h e t w o
handles and push forwards to fold
down the seat back and move the
seat forwards.
When put back, the seat returns to its initial position.
No person or object must prevent the seat from returning to its initial
position. Returning to this position is
necessary for the seat to lock. 4 - Seat back angle adjustment
Push the handle towards the rear.
5 - Head restraint height adjustment
To raise the head restraint, pull it up-
wards.
T h e a d j u s t m e n t i s c o r r e c t w h e n t h e
upper edge of the head restraint is
l e v e l w i t h t h e t o p o f t h e h e a d .
T h e h e a d r e s t r a i n t i s fi t t e d w i t h a f r a m e
with notches, which prevent the head
restraint dropping down (this is a safety
device in case of impact).
FRONT SEATS
Seat consisting of a seat cushion, seat
back and head restraint which can all
be adjusted to your optimum driving
and comfort position.
Never drive with the head re-
straints removed; they should be
in place and correctly adjusted.
It is impossible to access the rear
seats if the front seat is in a reclin-
ing position.
Heated seats
Press the switch, located on the control
panel next to the steering wheel. The
temperature is regulated automatically.
Press again to switch off.
Rear head restraint
These have a position for use (high)
and a position for storage (low).
To lower the head restraints, press the
lug.
They can also be removed.
To remove the head restraints, pull up-
wards as far as the stop then press the
release control.
To lower the head restraint, push simul-
taneously:
- the button on the left-hand guide
at the base of the head restraint
frame,
- the head restraint downwards.
To remove the head restraint, press the
lug.
B. P l a c e y o u r fi n g e r s i n o n e o f t h e t w o
handles and push forwards to fold
down the seat back. The seat does
not move forwards.
When put back, the seat back re- turns to its initial angle.
Page 36 of 119
!!
38
REAR SEATS
- position the seat belt under the belt holder 2 ,
- pull control 3 to unlock the seat
back 4 ,
- remove or lower the head restraint,
- tilt the seat back 4 . When repositioning:
- return the seat back to the upright
position,
- fold back the seat cushion,
- reposition the seat belt buckles before locking the front of the seat
cushion,
- check that the seats are locked cor- rectly.
Control 3 must be in the low position.
Rear seat or bench seat which can be
folded to adapt the load space in the
boot.
To fold the rear seats:
- lift the front of the seat cushion
1 ,
- tilt the seat cushion 1 against the
front seats,
Take care not to trap the seat
belts.
A l w a y s s t a r t w i t h t h e s e a t
cush-
ion
, never the seat back (risk of
damage).
Page 37 of 119
!!
39
BENCH SEAT
- position the seat belt under the belt holder 2 ,
- pull the controls 3 to unlock the seat
back 4 ,
- remove or lower the head re- straints,
- tilt the seat back 4 . When repositioning:
- return the seat back to the upright
position,
- fold back the seat cushion,
- reposition the seat belt buckles before locking the front of the seat
cushion,
- check that the bench seat is secured fi r m l y .
The controls 3 must be in the low
position.
To fold the bench seat:
- lift the front of the seat cushion
1 ,
- tilt the seat cushion 1 against the
front seats,
Take care not to trap the seat
belts.
A l w a y s s t a r t w i t h t h e s e a t
cush-
ion
, never the seat back (risk of
damage).
Page 38 of 119
40
Removing the rear seat Folding seat back TRANSPORTING LONG OBJECTS
- Tilt the seat cushion against the front seats.
- Squeeze the seat fasteners to re- lease them from their attachments.
- Remove the seat cushion. - Remove the head restraint for com-
plete folding of the seat back.
- Push one of the two handles 5 to-
wards the rear to tilt the seat back.
Front seat:
- Fold the seat back towards the front using the control 5 (see correspond-
ing paragraph).
Rear seat:
- Remove the seat cushion.
- Tilt the seat back.
Page 39 of 119
41
MIRRORS
Door mirrors
Manual model
Adjustment
Move the lever in all four directions
to direct the mirror correctly.
Folding
When parked, fold the mirror inwards
manually to protect it.
Unfolding
Before starting, unfold the mirror.
Electric model
Adjustment
Turn the control 1 to the right or to
the left to select the corresponding
mirror.
Move the control 1 in all four direc-
tions to adjust.
Return the control 1 to the centre
position.
Adjustable mirror permitting the lateral
rearward vision necessary when over-
taking or parking.
R e a r v i e w m i r r o r
Adjustment
Adjust the mirror to direct it correctly
i n t h e " d a y " p o s i t i o n .
Day/night position
P u l l t h e l e v e r t o c h a n g e t o t h e " n i g h t "
anti-dazzle position.
Push the lever to change to the nor-
m a l " d a y " p o s i t i o n .
As a safety precaution, the mirrors must
b e a d j u s t e d t o r e d u c e t h e " b l i n d s p o t " .
Adjustable mirror permitting central
rearward vision.
T h e m i r r o r i s fi t t e d w i t h a n i g h t a n t i - d a z z l e
device.
Page 40 of 119
!
42
STEERING WHEEL ADJUSTMENT
The height of the steering wheel can be
adjusted to adapt the driving position to
the size of the driver.
Adjustment
When stationary , lower the control
lever to unlock the steering wheel.
Adjust the height.
Raise the control lever to lock the
steering wheel.
As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.
SUN VISOR
Component which protects against
sunlight from the front or the side, also
equipped with a courtesy mirror.
T h e s u n v i s o r s a r e fi t t e d w i t h a c o u r -
t e s y m i r r o r , w i t h c o n c e a l i n g fl a p f o r t h e
driver.
Automatic day/night model
By means of a sensor, which measures
the light from the rear of the vehicle, this
system automatically and progressively
changes between the day and night
uses.
It has an anti-dazzle system which dark-
ens the mirror glass: this reduces any
driver discomfort caused by the light
beams of following vehicles, the sun...
In order to ensure optimum visibility during
your manoeuvres, the mirror lightens auto-
matically when reverse gear is engaged.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
