Page 25 of 108

Safety information
18
watch the skier’s hand signals and condi-
tion.
FX SHO
FX Cruiser SHO
Your control while pulling a water-skier is
affected by the skier’s ability, as well as wa-
ter and weather conditions.
When preparing to pull a skier, operate the
watercraft at the slowest possible speeduntil the watercraft is well away from the ski-
er and slack in the ski rope is taken up.
Make sure that the rope is not looped
around anything.
After checking that the skier is ready and
that there is no traffic or other obstacles, ap-
ply enough throttle to raise the skier.
Make smooth, wide turns. The watercraft is
capable of very sharp turns, which could ex-
ceed the abilities of the skier. Keep the skier
at least 50 m (150 ft), about twice the dis-
tance of a standard ski rope, from any po-
tential hazard.
Be alert to the hazard of the ski rope handle
snapping back at the watercraft when the
skier falls or is unable to get up on the skis.
Towing heavy or bulky objects other than
skiers, such as another boat or watercraft,
can cause loss of steering control and cre-
ate a hazardous condition. If you must tow
another boat in an emergency situation, op-
erate slowly and cautiously.
1Handgrip
1Handgrip
1Handgrip
1
UF1W71E0.book Page 18 Tuesday, June 24, 2008 11:46 AM
Page 26 of 108

Safety information
19
EJU30970
Safe boating rules
Your Yamaha watercraft is legally considered
a powerboat. Operation of the watercraft must
be in accordance with the rules and regula-
tions governing the waterway on which it is
used.
EJU30991
Enjoy your watercraft
responsibly
You share the areas you enjoy when riding
your watercraft with others and with nature.
So your enjoyment includes a responsibility to
treat these other people, and the lands, wa-
ters, and wildlife with respect and courtesy.
Whenever and wherever you ride, think of
yourself as the guest of those around you. Re-
member, for example, that the sound of your
watercraft may be music to you, but it could be
just noise to others. And the exciting splash of
your wake can make waves others won’t en-
joy.
Avoid riding close to shoreline homes and wa-
terfowl nesting areas or other wildlife areas,
and keep a respectful distance from fisher-
men, other boats, swimmers, and populated
beaches. When travel in areas like these is
unavoidable, ride slowly and obey all laws.
Proper maintenance is necessary to ensure
that the exhaust emission and sound levels of
your watercraft will continue to be within regu-
lated limits. You have the responsibility to
make sure that the recommended mainte-
nance in this owner’s/operator’s manual is
carried out.
Remember, pollution can be harmful to the
environment. Do not refuel or add oil where a
spill could cause damage to nature. Remove
your watercraft from the water and move it
away from the shoreline before refueling. Dis-
pose of water and any fuel and oil residue in
the engine compartment according to local
regulations. And keep your surroundings
pleasant for the people and wildlife that share
the waterways: don’t litter.
When you ride responsibly, with respect and
courtesy for others, you help ensure that our
UF1W71E0.book Page 19 Tuesday, June 24, 2008 11:46 AM
Page 27 of 108
Safety information
20
waterways stay open for the enjoyment of a
variety of recreational opportunities.
UF1W71E0.book Page 20 Tuesday, June 24, 2008 11:46 AM
Page 28 of 108
Features and functions
21
EJU31010
Location of main components
Front view
11
8
9765 4 3 2 1
10
1Handlebars
2Rear seat
3Front seat
4Footwell
5Sponsons
6Gunwale
7Pull-up cleat (for FX Cruiser SHO)
8Cooling water pilot outlet9Bow eye
10Hood
11Fuel tank filler cap
UF1W71E0.book Page 21 Tuesday, June 24, 2008 11:46 AM
Page 29 of 108
Features and functions
22
Rear view
1
2 12
11
10
8
7
6543
9
1Intake grate
2Speed sensor
3Stern eyes
4Stern drain plugs
5Reverse gate
6Ride plate
7Jet thrust nozzle
8Reboarding step
9Boarding platform
10Electric bilge pilot outlet
11Cleat
12Handgrip
UF1W71E0.book Page 22 Tuesday, June 24, 2008 11:46 AM
Page 30 of 108
Features and functions
23
Control system
10
11
12 2
20 34
5
1
9876
17
18
19 16
14 15 13
1Remote control transmitter
2Watertight compartment
3Start switch
4Engine shut-off switch
5Clip
6Engine stop switch
7Engine shut-off cord (lanyard)
8Quick Shift Trim System (QSTS) selector
9QSTS selector lock lever
10Multifunction information center
11Beverage holder
12Rearview mirrors
13Throttle lever
14Shift lever
15Tilt lever
16Glove compartment17Up switch (for cruise assist)
18Down switch (for cruise assist)
19“SET” switch (for cruise assist)
20“NO-WAKE MODE” sw itch
UF1W71E0.book Page 23 Tuesday, June 24, 2008 11:46 AM
Page 31 of 108
Features and functions
24
Engine compartment
1
3
6 4 25
10 8 79
1Engine cover
2Air filter case
3Water separator
4Fuel tank
5Battery
6Flushing hose connector
7Electrical box
8Engine oil filler cap
9Spark plug cap
10Dipstick
UF1W71E0.book Page 24 Tuesday, June 24, 2008 11:46 AM
Page 32 of 108
Features and functions
25
EJU31021
Operation of controls and other
functions
EJU31041Seats
To remove the rear seat:
Pull the rear seat latch up, and then pull the
seat off.
To install the rear seat:
Insert the projections on the front of the seat
into the stays on the deck, and then push the
rear of the seat down to lock it in place. Makesure that the seat is securely installed before
operating the watercraft.
To remove the front seat:
(1) Remove the rear seat.
(2) Pull the front seat latch up, and then pull
the seat off.
To install the front seat:
(1) Insert the projections on the front of the
seat into the stays on the deck, and then
1Seat latch
1Seat latch
UF1W71E0.book Page 25 Tuesday, June 24, 2008 11:46 AM