Page 17 of 62
16
INSTANT NAV
SWITCHING THE SYSTEM
ON/OFF
The system is switched on by turning the
ignition key to the MAR position and
switches off when the ignition key is
turned to the STOP position.
The system can always be turned on/off
by pressing the (ON/OFF) button 1- fig. 1.
If the system is turned on with the en-
gine switched off, it will automatically
switch off after about 20 minutes.
Dark mode (display dark)
With the system on, if the (ON/OFF)
button 1 - fig. 1 is pressed briefly, the
DARK mode is activated: the display will
go out, but the system remains on and
working.MAIN FUNCTIONS
The Instant Nav features four applica-
tions (Audio, Telephone, Trip Computer
and Navigation) and a general menu. The
four applications are activated by pressing
the MUSIC, TEL, TRIP, NAV buttons.
Press the MENU button to activate the
Menu.
NOTE The Telephone application is only
present with the Blue&Me
TMsystem.
All the applications have a specific Menu
that can be activated by pressing the OK
button/knob.The system also signals the following by
means of messages in the display:
– the presence of any problems/faults;
– information on the application activat-
ed/information on the status of the car.
To interact with the messages displayed,
use the OK button/knob or press button
Nto remove the message from the dis-
play.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 16
Page 18 of 62
17
INSTANT NAV
TRAFFIC INFO
(TMC/TMC Premium)
This displays traffic information received
in real time via the TMC/TMC Premium
service provided by several radio stations.
This Menu makes it possible to en-
able/disable the service and to set filters.
The filters are designed to define the area
of interest which the system will take in-
to consideration for traffic messages, fil-
tering those not considered important.
Note
The TMC Premium Service is available in
Italy, France, Germany and the UK. Only
the radio navigators sold in one of these
countries are enabled to receive the ser-
vice.
TMC Premium is provided by: MAIN MENU
Press the MENU button to display the
Main menu fig. 3.
Turn the OK button/knob to select the
desired function. Then, press the actual
knob to access the Menu selected.
NOTE For more details on each of the
functions described below, refer to the
relevant chapter.AUDIO
This Menu makes it possible to change
the audio source options (the only audio
sources that can be selected are those
available for the system):
– CD can only be selected if a music CD
is inserted (audio or MP3);
– USB is only available if the Blue&Me
TM
system is present and a USB memory stick
with music tracks has been inserted.
NAVIGATION
This Menu allows a destination to be en-
tered and navigation and map display op-
tions to be set.
PERSONAL DESTINATIONS
The personal destinations ambient
makes it possible to manage a list of pre-
ferred presonal destinations which can be
added to, modified or deleted from the
system.
fig. 3F0L5006g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 17
Page 19 of 62
18
INSTANT NAV
AUDIO
Press the MENU button to display the
Audio menu (fig. 4).
The Audio menu makes it possible to
manage:
– the RDS radio with FM/AM reception;
– the Compact Disc player;
– the MP3 Media Player;
– the audio adjustments. MYCAR
This makes it possible to display the
when the next Service is due and the sta-
tus of the car settings.
NOTE When this Menu is selected it is
only possible to display the status of the
car settings, the item “Configuration”
must selected to change them and then
“MyCar options” from the Main menu.CONFIGURATION
After having activated this Menu, select
the desired item by turning the OK but-
ton/knob and then press the actual knob
to confirm.
If the button is pressed or after about 30
seconds if no selection is made, the screen
will disappear from the display.
fig. 4F0L5008g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 18
Page 20 of 62
19
INSTANT NAV
– by activating the PTY function;
– by selecting a radio station or music
track from a list;
– by selecting the SCM, RDM or RPT
function (the latter is only available in CD
MP3 mode);
– by selecting the PRG function (in CD
mode only). This Menu makes it possible to adjust the
audio settings for the radio, the CD, the
Media Player (if connected) and the au-
dio adjustments for the speakers.
Pressing the MUSIC button activates the
display of information for the audio source
being listened to. Pressing the OK but-
ton/knob gives access to the specific au-
dio source menu being listened to. Press-
ing the
&button briefly activates the
“Mute” function.
VOLUME ADJUSTMENT
To adjust the volume, turn the knob
1-fig.1. The volume can be adjusted to a
maximum level of 40. When the system is
turned off and then turned back on, the
volume will be set at a level of 20.
With the MUTE function, when the knob
1- fig. 1 is turned, the MUTE function is
deactivated.MUTE/PAUSE FUNCTION
To activate the Mute/Pause function,
press the
&button or the &/ESCbut-
ton on the steering wheel briefly.
The Mute/Pause function is deactivated
in the following cases:
– by pressing the MEDIA button;
– by pressing the RADIO button;
– by pressing the PRESET button (in ra-
dio mode only);
– by pressing the
Obutton;
– by pressing the
N/O//buttons;
– by pressing the SRC or
N/Obutton
on the steering wheel;
– by opening the Audio adjustments
Menu in the main menu;
– by searching manually for a radio sta-
tion frequency;
A A
U U
D D
I I
O O
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 19
Page 21 of 62
20
INSTANT NAV
“AUDIO SETTINGS” MENU
This Menu is displayed in the following
cases:
– by pressing the
Obutton
– by pressing the MENU button and se-
lecting “Audio”;
– by selecting specific MENU for an au-
dio source.If there is no HI-FI system in the car, the
possible adjustments are (fig. 5):
– Treble/Bass
– Balance
– Loudness
– Speed-volume adjustment
– Equalization
If there is a HI-FI system in the case, the
audio arrives at the speakers via the out-
side amplifier. In this configuration the on-
ly possible adjustments are Treble/Bass
and Balance.Treble/Bass
(bass/treble adjustment)
Turn the OK button/knob to adjust the
bass/treble.
Balance (sound distribution)
Turn the OK button/knob to vary the
distribution of the sound in the passen-
ger compartment between the front/rear
speakers and the left/right speakers.
Loudness
The Loudness function improves the lev-
el of the sound whilst listening at low vol-
umes, increasing the bass and treble. Turn
the OK button/knob to activate/deactivate
the function.
IMPORTANTOn versions with HI-FI
systems, the Loudness function is disabled
because it is automatically managed by the
amplifier.
fig. 5F0L5013g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 20
Page 22 of 62
21
INSTANT NAV
Speed-volume adjustment
(speed dependent volume
adjustment)
This function allows the volume level to
be adjusted depending on the speed of the
vehicle, to maintain the correct balance
with the noise level inside the passenger
compartment.
Turn the OK button/knob to acti-
vate/deactivate the function.Equalization
This function makes it possible to select
one of the following equalizer curves:
– None (predefined car curve)
– Pop/Rock
– Classical
– Techno
– Jazz
– Vocal
Turn the OK button/knob to select the
desired adjustment.AUDIO SOURCE SELECTION
Alternatively, by pressing the MEDIA
button it is possible to select the CD
source (only if a CD is inserted) or the
Media Player (only if the Blue&Me
TMsys-
tem is present and a USB device with mu-
sic files is inserted). In this case, pressing
the RADIO button selects the radio mode
and subsequent presses give the possibil-
ity of selecting the preferred radio band.
Pressing the SRC button on the steering
wheel selects one of the audio sources
available.
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 21
Page 23 of 62
22
INSTANT NAV
RADIO FUNCTIONS
With the radio source activated, press-
ing the RADIO button repeatedly selects
one of the following frequency bands:
FM1, FM2, FM
AST, AM.
After having selected the desired fre-
quency, the display will show the follow-
ing information fig. 6:
– radio symbol
– radio station name
– frequency of the station tuned into
– number corresponding to the stored
position;
– frequency band activated (e.g.: FM1);
– programme name and typeRADIO STATION TUNING
Press the
N/O//buttons or theN/Obuttons on the steering wheel to
search for a radio station. It is also possi-
ble to select a radio station from a list or
by entering the frequency from the spe-
cific menu.
Manual tuning
This allows the manual search for sta-
tions on the desired band. Press the
N/Obutton briefly and repeatedly to
start the search in the desired direction.
If the
N/Obutton is pressed longer, the
fast search will start and then stop when
the button is released.
Automatic tuning
Press the
or button briefly to au-
tomatically tune into the next station in
the selected direction. If the
or but-
ton is pressed for longer, the rapid search
is launched. When the button is released,
the tuning will stop at the next station that
can be received.Radio stations list selection
Two different lists of radio stations can
be selected: one for the FM band and one
for the AM band. The system continuously
updates the list; it is possible to request
a list update by pressing button
h for a
while.
If reception is not ideal, the automatic
update is less frequent, therefore the list
may appear different after a manual up-
date.
To access the list of radio stations, press
button
h briefly.
The list of stations displays the name of
the station (if available) or the frequency.
The TMC indication is also displayed if the
FM station provides this service.
fig. 6F0L5040g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 22
Page 24 of 62
23
INSTANT NAV
Radio station selection
Up to 6 different radio stations can be
stored for each frequency band (FM1,
FM2, FM
AST, AM). They can be recalled by
pressing the PRESET button briefly.
After having pressed the PRESET button,
the display will show the list of 6 radio sta-
tions stored (fig. 7). Select the desired sta-
tion using the OK button/knob.RADIO STATION
PROGRAMMING
Up to 6 different radio stations can be
stored for each frequency band (FM1,
FM2, FMAST, AM). The programming can
be carried out manually for the FM1, FM2
and AM bands and automatically for the
FM
ASTband (AutoSTore).
Radio station manual
programming
After having selected the desired fre-
quency, press the PRESET button for a
while. The display will show the list of 6
positions available with information on the
stations currently stored and will allow the
user to store the station.AutoSTore function (automatic
radio station programming)
The AutoSTore function is only available
on the FM frequency band. To activate the
function, press the RADIO button for a
while or access the specific menu or the
radio main menu. The system will search
for and programme the 6 radio stations
with the strongest signal.
When the programming is over, the ra-
dio will tune into the first station stored
on the FM
ASTfrequency band.
Each station is only stored once, except
in the case of regional programmes which,
in some cases, may be stored twice.
fig. 7F0L5012g
603_97_471 CROMA_INSTANT NAV_GB_1ed 23-10-2009 15:29 Pagina 23
