2009 CITROEN DS3 Owners Manual

147
Driving

Four-speed automatic gearbox which offers a choice between the comfort of fully automaticoperation, enhanced by sport and snow pro
grammes, or manua
l gear c
hanging.
Therefore, four driving modes are offered: -
automatic
operation
for electronic
management of the gears by the gearbox,
-
spor
t programme for a more dynamic style
of driving,
-
snow
programme to improve driving when
traction is poor,
-
manual
operation for sequential changing
of the gears by the driver.

Automatic gearbox
1.
Gear lever.
2.
B
utton "
S"
(sport
).
3. Button "7"(snow).
Gear selection
gate
P. Park.
- Immobilisation o
f the vehicle, parkin
g brake
on or o
ff.
-
Starting the engine.
R. Reverse.
- Reversing manoeuvres, vehicle stationary, engine at idle.
N. Neutral.

- Immobilisation o
f the vehicle, parkin
g brake on.
-
Startin
g the en
gine.
D.Automat
ic o
perat
ion.
M. +
/- Manua
l operat
ion w
ith se
quent
ial
changing o
f the
four gears.
)
Push for wards to change up through the gears.
or ) Pull backwards to change down through
the
gears.
Gea
r l
ever

When you move the lever in the gate to select a position, the corresponding indicator is displayed on the instrument panel. P. Park
R.Reverse
N. Neutra
l
D. Drive
(Automatic driving
)
S. Spor
tprogramme
7.Sno
w
programme
1, 2, 3, 4
.Gear engaged during manual operation
-.Invalid value during manual operation Displays on the instrument panelFoot on brake
)
Press the brake pedal when this indicator
lamp
is displaye
d on t
he
instrument panel (e.g.: starting the engine).

Movin
g off
If position
Nis en
gaged inadver tent
ly
whil
e driving, a
llow t
he eng
ine to
return to
idle then engage pos
ition
Dto
accelerate.
Wh
en t
he eng
ine
is runn
ing at
idle, w
ith
the brakes released, i
f position
R , D or
M
is selected
, the vehicle moves even
without the accelerator being pressed.
When the engine is running, neve
r
lea
ve children in th
e vehicle with
out
superv
ision.
Wh
en carr
ying out ma
intenance w
ith
the en
gine runn
ing, app
ly the par
king
brake an
d se
lect
position
P. P
) Apply the par
king
brake.
)
Select position
P or N.
)
Start the engine.
If this procedure is not followed, an audible
signal is heard, accompanied by a message on the multifunction screen.
) With the en
gine runn
ing, press t
he brake
pedal.
) Release t
he par
king brake.
) Select position
R , Dor M ,
) Gradually release the brake pedal.
The vehicle moves off immediately.

149
Driving

Automatic operation)
Select position
D for automatic
chan
ging
o
f the
four
gears.

The gearbox then operates in auto-adaptive mode, without any inter vention on the part of the driver. It continuously selects the mostsuitable gear according to the style of driving, the profile of the road and the load in thevehicle.
For maximum acceleration without touching
the lever, press the accelerator pedal down fully (kick down). The gearbox changes down automat
ically or ma
inta
ins t
he gear se
lecte
d
unt
il the max
imum en
gine spee
d is reac
hed.
On braking, the gearbox changes down automatically to provide efficient engine braking.
If you release the accelerator sharply, thegearbox will not change to a higher gear for safety reasons.

Never select position
Nwhile the
vehicle is moving.
Never select positions
Por R
unless
the ve
hicle is comp
lete
ly stat
ionar
y.
Sport and snow programmes

These two spec
ial pro
grammes supp
lement t
he
automatic operation in very speci
fic conditions
o
f use.Sport programme "
S"
)
Press
button "
S", after starting the engine.
The gearbox automatically favours a dynamic
style of driving.
S appears on t
he instrument
pane
l.
Snow pro
gramme "
7"
) Press button "
7", a
fter startin
g the en
gine.
The gear
box a
dapts to
driving on s
lipper
y
roads.
Thi
s programme
improves start
ing an
d drive
when tract
ion
is poor.
7appears on t
he instrument
pane
l.
Retu
rn
to
auto
m
at
ic
operat
ion
) At an
y time, press t
he button se
lecte
d
again to qu
it the programme engage
d an
d
return to auto-a
daptive mo
de.

Manual operation
D disappears an
d the gears en
gaged
app
ear
in success
ion on t
he
instrument
pane
l.
In the event of the engine labouring
or over-revving, the gear selected flashes for afew seconds, then the actual gear engaged isdisplayed. It is possible to change from position
D
(automatic) to position
M
(manual) at any time.
Wh
en t
he ve
hicle is stat
ionar
y or mov
ing
very slowly, the gearbox selects gear
M1
automatically. The sport and snow programmes do not operate in manual mode.

Invalid value durin
g manual
operation
)
Select
position
M for sequent
ialchanging
o
f the
four gears.
)
Push the lever towar
ds the +
sign to
change up a gear.
)
Pull th
e lever towards the - sign to change
down a gear.
It is onl
y possible to chan
ge from one
gear to
another i
f the vehicle speed and en
gine speed
permit; other wise, the gearbox will operate temporarily in automatic mode.

This s
ymbol is displa
yed i
f a gear
is not en
gaged correctl
y (selector
between two positions
).

Stoppin
g the vehicle

Before switchin
g off the en
gine,
you can en
gage
position
Por N
to p
lace t
he gear
box in neutra
l.

In both cases, app
ly the par
king
brake to
immo
bilise t
he ve
hicle.
Wh
en t
he ignition is on, t
he
lighting of this warning lamp,
accompanied by an audible
signal and a message on the multifunction screen,
indicates a
gearbox malfunction.
In this case, the
gearbox switches to back-up mode
and is locked in 3rd gear. You ma
y feel a substantial
knock when chan
ging from
Pto R and from R
Nto R.R
This w
ill not cause an
y dama
ge to t
he gear
box.
Do not exceed 60 mph
(10 0 km
/h), local speed
restrictions permitting.
Contact a CITROËN dealer as soon as possible.
Operatin
g fault
If the lever is not in position
P ,P
when the driver's door is opened or approximatel
y 45 seconds after the
ignition is switched o
ff, a messa
ge
app
ears in the multi
function screen.
)
Return t
he lever to
position
P; the
message
disappears.
There is a risk o
f dama
ge to the
gearbox:
- i
f you press the accelerator and brake pedals at t
he same t
ime,
- i
f you
force the movement o
f the
gear lever from the
Pposition to
another position when the battery is flat.

To reduce fuel consumption when at a prolon
ged standstill with the en
gine
runnin
g (traffic
jam...
), put the
gear
lever in th
e Nposition and appl
y the
parkin
g brake.

151
Driving
System which prevents the vehicle fromexcee
ding the spee
d pro
gramme
d by the driver.

When the programmed speed limit is reached,pressing the accelerator pedal in the normal manner no longer has any effect. The speed limiter is
switched
on
manua
lly:
it requires a programmed speed of at least 20 mph (30 km/h). The speed limiter is
switched off
by manual f
operation of the control. The programmed speed can be exceeded temporaril
y by pressin
g the accelerator
firml
y.

To return to t
he pro
gramme
d spee
d, simp
ly
slow
down to a spee
d below t
he pro
gramme
d
speed.
The programmed speed remains in the memory when the ignition is switched off. Speed limiter
The spee
d limiter cannot,
in an
y
circumstances, re
place t
he nee
d to
res
pect s
peed limits, nor can
it re
place
the need
for vi
gilance and responsibilit
y
on the
part o
f the driver. The controls of this s
ystem are
grouped
together on stalk
A.
1.
Speed limiter mode selection thumb wheel
2. Value
decrease
button
3. Value
increase
button
4.
Speed limiter on
/off button
Steerin
g mounted controls
The pro
grammed information is
grouped
to
gether on the instrument panel displa
y.
5. Speed limiter on
/off indication
6. Speed limiter mode selection indication
7. Programme
d spee
d va
lue

Displa
ys on the instrument panel

)
Turn t
hum
b wheel 1to the
"LIMIT"
position: the speed limiter mode is
selected but is not switched on (PAUSE).
You do not have to switch the speed limiter on
in order to set the speed. ) Set the speed value b
y pressin
g button
2
or 3(e.g.: 55 mph (90 km/h)).
Pro
grammin
g
You can then change the programmed speed using buttons
2 and
3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph
(km/h
) = maintained press.
)
Switch the speed limiter on b
y pressin
g button
4.
)
Switch the speed limiter o
ff by pressin
g button
4: the display
confirms that it has been switched o
ff (PAU
SE).
)
Switch the speed limiter back on by pressing button 4 aga
in.
Excee
di
ng t
he programme
d spee
d
Press
ing t
he acce
lerator pe
dal to excee
d the programme
d spee
d will not
have
any effect unless you press the pedal
firmly
past the y
point of resistance .
The speed limiter is deactivated temporarily and the programmed speed,
which is still displayed, flashes. Returning to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashin
g of the pro
grammed speed.
On a stee
p descent or in the event o
f
sharp acce
lerat
ion, t
he s
peed limiter
will
not
be a
ble to
prevent t
he ve
hicle
from exceeding the programmed speed. To avoid any risk of jamming of the pedals: - ensure that the mat is positioned
correctl
y,
- do not
fit one mat on to
p of another.
Leavin
g limiter mode
)
Turn th
umb wh
eel 1 to the "0" position:
t
he s
peed limiter mo
de is dese
lecte
d. The
display returns to t
he distance recor
der.
Operating
fault
In the event of a speed limiter malfunction, the speed is cleared resulting in flashing of thedas
hes.
Have the s
ystem checked b
y a CITROËN
deale
r.

153
Driving
Cruise control
System which automatically maintains the speed of the vehicle at the value programmedby the driver, w
ithout an
y act
ion on t
he
accelerator pedal. The cru
ise contro
l is switched
on
manua
lly: it
re
quires a minimum vehicle s
peed o
f 25 m
ph
(40 km/h), as well as the engagement of: - fourth gear on a manual gearbox,
- second gear on an automatic gearbox, in
sequential mode,
- position
D on an automatic gearbox.
The
cruise
control is switched off
manually f
or by press
ing the brake or c
lutc
h pe
dal or
on triggering of the ESP system for safetyreasons
.
It is possible to exceed the programmed speed
temporarily by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator pedal.
Switching off the ignition cancels any programmed speed value.
The controls of this s
ystem are
grouped
together on stalk
A.
1.
Cruise control mode selection thumb whel
2. Value
decrease
button
3. Value
increase
button
4.
Cruise control o
ff/resume button
Steerin
g mounted controls
The cru
ise contro
l cannot,
in an
y
circumstances, re
place t
he nee
d to
respect s
peed limits, nor can
it re
place
the need
for vi
gilance and responsibilit
y
on the
part o
f the driver. The pro
grammed information is
grouped
to
gether on the instrument panel displa
y.
5. Cruise control o
ff/resume indication
6. Cruise control mode selection indication
7. Programme
d spee
d va
lue
Displa
ys on the instrument panel

Pro
grammin
g
)
Turn thumb wheel
1 to the
"CR
UISE"
position: the cruise control mode is selected but is not switched on (PAUSE).
)
Set the programmed speed by acceleratin
g to the required speed, then
press button
2or 3
(e.g.: 70 mph
(11 0 k m
/h)).
You can then change the programmed speed using buttons
2 and 3 :
- b
y + or - 1 mph
(km/h
) = short press,
- b
y + or - 5 mph
(km
/h) = lon
g press,
- in steps o
f + or - 5 mph
(km
/h) = maintained press.
)
Switch o
ff the cruise control b
y pressin
g button
4 : the display
confirms that it has been switched o
ff (PAU
SE).
)
Switch the cruise control back on b
y pressin
g button
4again.
Excee
di
ng t
he programme
d spee
d
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed on the display. Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashing of the speed. Leaving cruise control mode )
Turn t
hum
b wheel 1 to t
he "
0"position: the cruise control mode is
deselected. The display returns to the distance recorder.
Operatin
g fault
In the event of a cruise control malfunction
,
the speed is cleared resultin
g in
flashin
g of the
dashes. Have it checked b
y a CITRO
ËN dealer.
Wh
en t
he cru
ise contro
l is sw
itched on,
be care
ful if you maintain the pressure
on one o
f the programmed speed
changing buttons: this may result in a very rapid change in the speed of your vehicle.
Do not use
the cruise control on
slipper
y roads or in heav
y tra
ffic.
On a stee
p descent, the cruise control
will
not
be a
ble to
prevent t
he ve
hicle
from exceeding the programmed speed. To avoid any risk o
f jamming o
f the
pedals: - ensure that the mat is positioned
correctly,
- never fit one mat on top of another.