2008 TOYOTA SEQUOIA Navigation Manual

OTHER FUNCTIONS
162
5U5169F
Although you can register up to 6 Blue-
tooth phones in the system, only one
Bluetooth phone can function at a time.
5U5170F
3. Touch “OK”.
5U5171F
When the result message is displayed, you
can use the Bluetooth phone.When another Bluetooth
 phone is trying
to connect, this screen is displayed.
5U5172F
Touch “Yes” or “No”.

OTHER FUNCTIONS
163 
Displaying Bluetooth information
You can see or set the information of the
Bluetooth
 phone on the system.
Device Name
The name of Bluetooth
 phone . . .
which is displayed on the screen.
You can change it into a desired
name.
Bluetooth
∗ Device Address
The address peculiar to the system. . . .
You cannot change it.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
5U5173F
1. Select the desired phone and touch
“Information”.
5U5174F
2. Touch “Change”.
5U5175F
3. When you complete the setting,
touch
.

OTHER FUNCTIONS
164 
Changing a device name
You can change a device name. If you
change a device name, the name regis-
tered in your cellular phone is not
changed.
5U5176F
1. Touch “Change”.
5U5177F
2. Use the software keyboard to input
the device name.
Changing the Bluetooth settings
You can change the display and settings of
Bluetooth
 information on the system.
The information displays the following
items.
Device Name
The name in the Bluetooth
 net- . . .
work. You can change it.
Passkey
The password when you register . . .
your cellular phone in the system.
You can change it into the figure of
4−8 digits.
Bluetooth
∗ Device Address
The address peculiar to the system. . . .
You can not change it. If you have
registered two Bluetooth
 phones
with the same Device Name or
Passkey and you cannot distin-
guish one from the other, refer to it.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
165
When you change the Device Name or
Passkey, do the followings.
5U5178F
1. Touch “Bluetooth∗”.
5U5179F
2. Touch “Change” of “Device Name”
or “Passkey”.
5U5180F
3. Use the software keyboard to input
the Device Name.
You can input up to 20 characters.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.
5U5181F
4. Input a Passkey with 4 8 digits.
When you touch , the inputted number is
deleted.
5U5182F
5. When you complete the setting,
touch
.

OTHER FUNCTIONS
166 
Initializing the Bluetooth settings.
You can initialize the settings.
5U5183F
1. Touch “Default”.
5U5184F
2. Touch “Yes”.
Deleting a Bluetooth phone
5U5185F
1. Touch “Delete” of “Bluetooth∗
Telephone”.
5U5186F
2. Select the telephone you want to de-
lete and touch “OK”.
5U5187F
3. Touch “Yes”.
∗: Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

OTHER FUNCTIONS
167 
Displaying the information of the
Bluetooth phone you delete
You can display the information of the
Bluetooth
 phone before you delete it
and you can make sure whether the
telephone you delete is correct or not.
5U5188F
1. Select the telephone you want to
display the information about.
5U5A90F
2. When you complete confirming it,
touch
.The speech command system enables
you to operate the navigation system
and audio system by giving a com-
mand.
XS00307
1. Push the talk switch.
A beep sounds and on screen message is
displayed with an indicator at the top left.
Speech command system

OTHER FUNCTIONS
168
5U5190F
2. Give a command while an indicator
is shown on the display. If you want to
check the command list, touch “Help”
to display the Help screen. (See “Help
screen” on page 170.) When you touch
“Cancel”, the previous screen returns.
If the navigation system does not respond
or the confirmation screen does not disap-
pear, please push the talk switch and try
again.
If no command is given, a beep sounds
and the indicator disappears 6 seconds
later.
If the system does not recognize your
speech, the system will respond with this
message (“System does not recognize
this command, please rephrase your
command.”). Start the operation from the
beginning.
XS00305
Microphone (Type A)
XS00306
Microphone (Type B)
It is unnecessary to speak directly into
the microphone when giving a com-
mand.

OTHER FUNCTIONS
169
Speech command example: Searching
for a route to your home.
1. Push the talk switch.
2. Say “Home”.
You can also say the street name or ad-
dress.
∗ (ex. say “Woodridge Avenue”.)∗: “Hawaii” or Hawaii area is not covered
by the voice recognition.
If your home is not registered, you will hear
“Home is not registered”.
5U5191F
3. If the system recognized the com-
mand, the recognition result “Home” is
displayed on the top of the screen with
the screen message. (Displayed mes-
sage and the touchscreen buttons on
the screen depend on the situation.)
Touch or say “Cancel”, and the system will
be canceled. Touch or say “Help”, and dis-
plays the “Help” screen.
5U5192F
4. Touch “Enter” or say “Enter
destination”, and the system starts
searching for a route to your home. (If
the destination is already registered,
“Add to
” or “Replace ” is
displayed on the screen.)
Touch or say “Cancel”, and the search will
be canceled.
When you search the destination by
“POI Name”, this screen is displayed.
5U5193F
Touch “Enter” or say “Enter destination”.
When you touch “Show List”, you can
search another spot in its category.
INFORMATION
In the following conditions, the sys-
tem may not recognize the command
properly.
The command is not correct or
clear.
There are some noises such as
wind noise, etc.