2008 TOYOTA SEQUOIA Navigation Manual

OTHER FUNCTIONS
130
(iii) By dialed numbers
You can call by dialed number. The sys-
tem memorizes up to 5 dialed numbers.
If it is over than 5, the oldest number is
deleted.
This cannot be operated while driving.
5U5037F
1. Touch “Call Log” to display
“Outgoing Calls” screen.
5U5038F
When you call by phone book, the
name (if registered) is displayed.
When you call the same number
continuously, only the newest
number is registered.
2. Select the desired number from the
list.
5U5039F
3. Touch or push the switch of
the steering wheel.

OTHER FUNCTIONS
131
(iv) By received calls
You can call by received calls. When a
call is received, the system memorizes
up to 5 numbers. If it is more than 5, the
oldest number is deleted.
This cannot be operated while driving.
5U5040F
1. Touch “Call Log” to display
“Outgoing Calls” screen.
5U5041F
2. Touch “Incoming Calls” to display
“Incoming Calls” screen.
5U5042F
When a telephone number registered
in the phone book is received, the
name and the number are displayed.
Received calls which you did not
answer are also memorized in the
system and “Abs.” is displayed
on the left side of the number.
Unnoticed telephone number such as
a public telephone is not
memorized in the system.
3. Select the desired number from the
list.
5U5043F
4. Touch or push the switch of
the steering wheel.
A international phone call may not be
made depending on the cellular
phone which you have.

OTHER FUNCTIONS
132
(v) By speed dial
You can call by registered telephone
number which you selected from a
phone book, dialed numbers and re-
ceived calls. (See page 138 for register-
ing the speed dial.)
5U5044F
1. Touch “Speed Dial” to display
“Speed Dial” screen.
5U5045F
2. Touch the desired number to call.
You can change the page by touching
“Speed Dial 2” or “Speed Dial 3”.
When you push the telephone button while
driving, the screen above appears. Touch
the desired name to call. (The telephone
number is not displayed.)(vi) By voice recognition
5U5046F
You can call by giving a command. (For
the operation and command of voice
recognition, see “Speech command
system” on page 167 and “Help
screen” on page 170.)

OTHER FUNCTIONS
133 
Dialing by name
You can call by giving a voice tag regis-
tered in the phone book. For setting the
voice recognition, see “Setting the
voice recognition” on page 151.
Example: Call DAD
XS00332
You: Push the talk switch.
System: “After the beep, please say the
name.”
You: “DAD.”
System: “DAD chosen, when ready,
please briefly push the talk
switch or push the off−hook
switch to dial.”
You: Push the talk switch.
System: “After the beep, please say
“Dial”.”
You: “Dial.”
System: “Dialing the name.”
Now you can call DAD.
5U5048F
“Next” is displayed when multiple entries
are found for a searched name.
Up to 6 entries can be displayed including
the first searched one.
Do the following to change the entry to the
next one.
Touch “Next”
Push the talk switch to say “Next
Candidate”.
Calling without the voice recognition
After the entry number is displayed, you
can also call by pushing the telephone
switch or touching “Dial”.
Cancelling the voice recognition
The voice recognition will be cancelled
when you do the following.
Keep on pushing the talk switch
Push the switch of the steering
wheel.
Touch “Cancel”. (Except for recogniz-
ing the command)
Say “Cancel”

OTHER FUNCTIONS
134 
Dialing by phone number
You can call by giving a desired num-
ber.
5U5046F
You: Push the talk switch.
System: “After the beep, please say the
number.”
You: “812387”
System: “When ready, please briefly
push the talk
switch or push the
off−hook switch to dial.”
You: Push the talk switch.
System: “After the beep, please
continue to add
numbers or say “Dial”.”
You: “Dial.”
System: “Dialing the number.”
Now you can call 812387.
Sending a tone
You can send a tone by giving a desired
number.
XS00333
You: Push the talk switch.
System: “Say numbers, pound, or star.”
You: “1234.”
System: “1234.” “Push the talk switch.”
You: Push the talk switch.
System: “Send? Say Yes or No.”
You: “Yes.”
System: “Sending.”
Now you can send the tone.

OTHER FUNCTIONS
135
(vii) By POI call
5U5051F
You can call by touching when
it is displayed on the screen from navi-
gation system. (See page 25 for de-
tails.)
5U5052F
When a call is received, this screen is
displayed with a sound. Touch
or
push the
switch of the steering
wheel to talk on the phone.
To hang up the phone:
Touch
or push the switch of
the steering wheel again.
To refuse to receive the call:
Touch
and hold it.
To adjust the volume of received call:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.
— Receive on the
Bluetooth phone

OTHER FUNCTIONS
136
5U5053F
While you are talking on the phone, this
screen is displayed. You can do the op-
eration below on the screen.
To adjust the volume of the other party’s
voice:
Touch
“–” or “+” or use the volume
switch of the steering wheel.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
To mute your voice:
Touch “Mute”.
To input a Key:
Touch “09”.
To transfer the call
Touch “Transfer Call”.
You cannot change from Hands−free call
to cellular phone call while driving.
When you change from cellular phone call
to Hands−free call, the Hands−free screen
will be displayed and you can operate it on
the screen.
Transferring method and behavior are dif-
ferent depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.
5U5054F
Touch the desired number to input the key.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
This cannot be operated while driving.
— Talk on the Bluetooth
phone

OTHER FUNCTIONS
137
5U5055F
If the continuous tone signal is regis-
tered in a phone book, this screen ap-
pears. (If not registered, “Send” and
“Exit” are not displayed.)
Confirm the number displayed on the
screen and touch “Send”. The number
before marked sign will be sent.
When you touch “Exit”, this function will
be finished and normal tone screen ap-
pears.
To hang up the phone:
Touch
or push the switch of
the steering wheel.
The continuous tone signal is the marked
sign (p or w) and the number following tele-
phone number. (ex. 056133p0123w#1
)
You can do this operation when you want
to operate an answering machine or use a
telephone service in bank for example.
You can register the phone number and
the code number in the phone book.
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see
“Registering the speed tone” on page
140.)
5U5056F
1. Touch “Speed Tone”.
5U5057F
2. Touch the desired switch to send a
tone.