Maintenance
8-7
8
1. Park the car on a horizontal surface. 2. Switch off the engine. 3. Wait a few minutes. 4. Remove the dipstick and wi
pe it with a clean cloth.
5. Reinsert the dipstick as far as it goes. 6. Remove the dipstick and read the oil level, which should
always be within the range indicated.
7. If the oil level is below the specified limit, remove the cap
located on the cylinder head cover and add enough oil to raise the level to within the specified range. Do not over-fill to avoid engine damage. Be sure to use the specified engine oil and do not mix various types of oil.
8. After adding oil, cl
ose the cap securely.
9. Confirm the oil level by repeating step 4 to 6. Use only the recommended oils wi
th an ACEA or API classifi-
cation as specified in this manual.
NOTE●
Engine oil consumption is greatly influenced by payload, engine speed, etc. It may
reach 1.0 lit./1,000 km depend-
ing on style of driving.
●
The engine oil will deterior
ate rapidly if the vehicle is
subjected to severe conditions, requiring earlier oil replacement. Please refer to the maintenance schedule.
●
For handling of used engine oils, refer to page 8.
BK-BK2008E1ENUK.en-uk-Section11.fm Page
7 Wednesday, January 9, 2008 4:50 PM
